CaptainSteve Posted April 21, 2015 Author #301 Posted April 21, 2015 (edited) For those o' ye who ha' not a-followed Our Hero through his Bounty Launch build, and be yet to discover the vagaries of CaptainSteve, then ye shall soon learn-eth that he doth have a tendency to go off on tangents, at times. Most verily, this be one o' those times !!! "If you wouldst recall," CaptainSteve didst begin-eth, "'t'other eve there be three drink can ring-pulls a-sitting on me work-bench ..." These were not there, as one might assume, simply because Our Hero got lazy and couldst naught be bothered to clean up after his-self. "I be a-seein' this pic," he were to announce-eth, "in me copy of Marquardt's AOTS." It got Our Hero to thinkin', and this eve he were to take-eth up his Dremel and his pin-drill. "Now, they be a-lookin' like this !!" CaptainSteve stated, somewhat emphatically. Hmmm ... 'pon reflection Our Hero may consider a re-do ... Edited April 21, 2015 by CaptainSteve UpstateNY, Aussie048, Salty Sea Dog and 12 others 15 Quote CaptainSteve Current Build: HM Granado Bomb Vessel (Caldercraft) My BathTub: Queen Anne Barge (Syren Ship Models) Log: Queen Anne Barge (an build log) Bounty Launch (Model Shipways) Log: Bounty Launch by CaptainSteve Apostol Felipe (OcCre) HMS Victory (Constructo) Check It Out: The Kit-Basher's Guide to The Galaxy Website: The Life & Boats of CaptainSteve
JSGerson Posted April 21, 2015 #302 Posted April 21, 2015 The can ring pulls would be a perfect subject for your other log, Kit-Basher's Guide To The Galaxy Canute, CaptainSteve, mattsayers148 and 1 other 4 Quote Current Build: Model Shipways USS Frigate Constitution Past Builds: Bob Hunt's kitbash of the Mamoli Rattlesnake Model Shipways Typical Ship’s Boat for the Rattlesnake Mini-Mamoli solid hull British Schooner Evergreen Model Airways Albatros D.Va - 1917, The Red Baron's Forgotten Fighter Member: Nautical Research Guild
GLakie Posted April 21, 2015 #303 Posted April 21, 2015 That's an interesting idea there Captain. Looks like I need to pick up my copy of that book pretty soon. Cheers CaptainSteve and mattsayers148 2 Quote GEORGE Don't be bound by the limits of what you already know, be unlimited by what you are willing to learn. Member of the Nautical Research Guild
capnharv2 Posted April 21, 2015 #304 Posted April 21, 2015 (edited) Great idea for the horseshoes CaptainSteve! I'll drink to that! Harvey Although one thing I wonder is how to copper plate over them. I don't know if I've seen the shoes and copper on a model before. . . Edited April 21, 2015 by capnharv2 mattsayers148, GLakie and CaptainSteve 3 Quote
CaptainSteve Posted April 21, 2015 Author #305 Posted April 21, 2015 Great idea for the horseshoes CaptainSteve! I'll drink to that! Harvey Although one thing I wonder is how to copper plate over them. I don't know if I've seen the shoes and copper on a model before. . . This is something I was wondering, also, Harv'. On the one hand, once installed they could easily be removed if they don't work ... On the other, mayhaps I should do a test before putting them on. GLakie, mattsayers148 and Canute 3 Quote CaptainSteve Current Build: HM Granado Bomb Vessel (Caldercraft) My BathTub: Queen Anne Barge (Syren Ship Models) Log: Queen Anne Barge (an build log) Bounty Launch (Model Shipways) Log: Bounty Launch by CaptainSteve Apostol Felipe (OcCre) HMS Victory (Constructo) Check It Out: The Kit-Basher's Guide to The Galaxy Website: The Life & Boats of CaptainSteve
Canute Posted April 21, 2015 #306 Posted April 21, 2015 Try it before you jump off that pier, Cap'n. mattsayers148, CaptainSteve and GLakie 3 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild
mtaylor Posted April 21, 2015 #307 Posted April 21, 2015 Nice horseshoes, sir... well done. Copper paint maybe? As for a full gundeck... have a look at the other Connie builds. A lot gets hidden with full planking and decks.. However, you and a few thousand of us will know what's there. Oh.. and tell xken that there's no sacred cows except to be nice and have fun.... GLakie, Canute, Salty Sea Dog and 3 others 6 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Jack12477 Posted April 21, 2015 #308 Posted April 21, 2015 CaptainSteve, I'll take a seat on the poop deck and watch the build too. CaptainSteve, GLakie and mattsayers148 3 Quote Jack "No one is as smart as all of us" - Is ón cheann a thagann an cheird The craft comes from the head --------------------------------------------- Current build: US Constellation Non-ship builds: USCG UH-65A Dolphin M16 Multi-gun motor carriage diorama M4A3 Sherman Tanks dioramas 1936-1939 Mercedes Benz 540K 1934 Rolls-Royce Phantom II JSDF Light Armor Vehicle Figures: The Last Bridge: Raider Reaper Edge of Universe: Ianis The Last Bridge: Vadim with cart Completed build log(s): 18th Century Longboat , Marie Jeanne, Willie L Bennett 1888 50 ft Gaff-rigged Ice Yacht Scratch Build The Sullivans (DD 537) Liberty Ship SS John W Brown USS England (DE 635), Artesania Latina Titanic Lifeboat Gallery: Swift , Armed Virginia Sloop, Santisima Trinidad Captain's Launch , 18th Century Longboat , Marie Jeanne Other: Rhinebeck Aerodrome Tour
Modeler12 Posted April 21, 2015 #309 Posted April 21, 2015 CaptainSteve, making horseshoes like that is one way to get more cans of beer aboard.In fact, the more you screw these up the more beer for us. mattsayers148, capnharv2, GLakie and 3 others 6 Quote Jay Current build Cross Section USS Constitution http://modelshipworld.com/index.php/topic/10120-cross-section-forward-area-of-the-uss-constitution/ Finished USS Constitution: http://modelshipworld.com/index.php?/topic/103-uss-constitution-by-modeler12/ 'A picture is worth a . . . . .' More is better . . . .
dgbot Posted April 21, 2015 #310 Posted April 21, 2015 You are allowing the inner child into you life go for it and I will pull up a chair and cheer you on. David B Canute, CaptainSteve, mattsayers148 and 1 other 4 Quote Work in progress USS Maine in cardstock.http://modelshipworld.com/index.php/topic/7446-uss-maine-by-dgbot-hmv-card/#entry220003 Completed Blockade runner Teazer http://modelshipworld.com/index.php/topic/6063-blockade-runner-teazer-by-dgbot-card-stock/#entry175967 Completed The Monitor Lehigh http://modelshipworld.com/index.php/topic/6920-the-monitor-lehigh-by-dgbot-card-model/#entry203680 Completed Kingston Class MCVD http://modelshipworld.com/index.php/forum/10-kit-build-logs-in-progress/
JSGerson Posted April 22, 2015 #311 Posted April 22, 2015 Question: Those horseshoes are lovely but would you actually see them once you copper plate the hull? GLakie, mattsayers148 and CaptainSteve 3 Quote Current Build: Model Shipways USS Frigate Constitution Past Builds: Bob Hunt's kitbash of the Mamoli Rattlesnake Model Shipways Typical Ship’s Boat for the Rattlesnake Mini-Mamoli solid hull British Schooner Evergreen Model Airways Albatros D.Va - 1917, The Red Baron's Forgotten Fighter Member: Nautical Research Guild
thomaslambo Posted April 22, 2015 #312 Posted April 22, 2015 (edited) For those o' ye who ha' not a-followed Our Hero through his Bounty Launch build, and be yet to discover the vagaries of CaptainSteve, then ye shall soon learn-eth that he doth have a tendency to go off on tangents, at times. I must hold you responsible for leading me (an OCD family member) down the "Rabbit Hole of Obsessive Details". As such, I've been lost on the dark side for almost two weeks now without a single post on my log....however, when I do come up for air I think it will have been worth the time and effort. Good luck on the horseshoes Boyd Edited April 22, 2015 by thomaslambo Salty Sea Dog, mattsayers148, CaptainSteve and 2 others 5 Quote Boyd Current Build - HMS Bounty - Artesania Latina - Scale1:48
CaptainSteve Posted April 22, 2015 Author #313 Posted April 22, 2015 Question: Those horseshoes are lovely but would you actually see them once you copper plate the hull? That remains to be seen, JS. I'll try a test this weekend. First up, I'm trying to find some copper foil (thinner than the tape included in the kit for doing the copper plating). My thinkin' being that using a thinner medium would make it easier to press the foil into the ring-pull. I had always figured on doing some form o' colouration to the patina, so having different thicknesses/textures should not matter. mattsayers148, Canute and GLakie 3 Quote CaptainSteve Current Build: HM Granado Bomb Vessel (Caldercraft) My BathTub: Queen Anne Barge (Syren Ship Models) Log: Queen Anne Barge (an build log) Bounty Launch (Model Shipways) Log: Bounty Launch by CaptainSteve Apostol Felipe (OcCre) HMS Victory (Constructo) Check It Out: The Kit-Basher's Guide to The Galaxy Website: The Life & Boats of CaptainSteve
CaptainSteve Posted April 22, 2015 Author #314 Posted April 22, 2015 I must hold you responsible for leading me (an OCD family member) down the "Rabbit Hole of Obsessive Details". As such, I've been lost on the dark side for almost two weeks now without a single post on my log....however, when I do come up for air I think it will have been worth the time and effort. Good luck on the horseshoes Boyd Guilty as charged, Boyd !! I'm looking forward to seeing the results of your OCD work, mattsayers148, Canute and GLakie 3 Quote CaptainSteve Current Build: HM Granado Bomb Vessel (Caldercraft) My BathTub: Queen Anne Barge (Syren Ship Models) Log: Queen Anne Barge (an build log) Bounty Launch (Model Shipways) Log: Bounty Launch by CaptainSteve Apostol Felipe (OcCre) HMS Victory (Constructo) Check It Out: The Kit-Basher's Guide to The Galaxy Website: The Life & Boats of CaptainSteve
mobbsie Posted April 23, 2015 #315 Posted April 23, 2015 Just found you Captn, mind if I stow away and stick my head up now and again. I think were in for just as interesting a ride as with the Bounty Launch. Really looking forward to it. Be Good mobbsie mattsayers148, Canute, CaptainSteve and 1 other 4 Quote mobbsie All mistakes are deliberate ( me ) Current Build:- HMS Schooner Pickle Completed Builds :- Panart 1/16 Armed Launch / Pinnace ( Completed ), Granado Cross Section 1/48 Harwich Bawley, Restoration, Thames Barge Edme, Repair / Restoration, Will Everard 1/67 Billings HMS Agamemnon 1781 - 1/64 Caldercraft Kit, HM Brig Badger, HM Bomb Vessel Granado, Thames Steam Launch Louise, Thames Barge Edme, Viking Dragon Boat Next Build :-
CaptainSteve Posted April 23, 2015 Author #316 Posted April 23, 2015 Arrr ... It be most goodly to have ye along fer the ride, Mobbsie !! mattsayers148 and GLakie 2 Quote CaptainSteve Current Build: HM Granado Bomb Vessel (Caldercraft) My BathTub: Queen Anne Barge (Syren Ship Models) Log: Queen Anne Barge (an build log) Bounty Launch (Model Shipways) Log: Bounty Launch by CaptainSteve Apostol Felipe (OcCre) HMS Victory (Constructo) Check It Out: The Kit-Basher's Guide to The Galaxy Website: The Life & Boats of CaptainSteve
gjdale Posted April 23, 2015 #317 Posted April 23, 2015 Okay, I'm in too! Looks like you have some really interesting mods going on here. Oh, and for the record, I don't have OCD..................... I have CDO...............'cause the letters really should be in the correct alphabetical order! mtaylor, mattsayers148, CaptainSteve and 3 others 6 Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout
NenadM Posted April 23, 2015 #318 Posted April 23, 2015 Cap do I miss something because my poor english ? Looking above picture first I think about was beer can top with oppening mechanism mtaylor, CaptainSteve, Salty Sea Dog and 2 others 5 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic
Jparsley Posted April 23, 2015 #319 Posted April 23, 2015 Nenad your right it's a pull ring on top of a beer or soda can CaptainSteve, mattsayers148 and GLakie 3 Quote USF Constellation 1/85 AL Jparsley
NenadM Posted April 23, 2015 #320 Posted April 23, 2015 Work of bashing genius !!!! :10_1_10: CaptainSteve, mattsayers148, mtaylor and 1 other 4 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic
Canute Posted April 23, 2015 #321 Posted April 23, 2015 Okay, I'm in too! Looks like you have some really interesting mods going on here. Oh, and for the record, I don't have OCD..................... I have CDO...............'cause the letters really should be in the correct alphabetical order! I have two mates who have the same affliction. And when they get together it's an installment of "The Bickerson's", nattering back and forth on some detail. They're a hoot! This will be a most interesting build. CaptainSteve, GLakie and mattsayers148 3 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild
CaptainSteve Posted April 23, 2015 Author #322 Posted April 23, 2015 Cap do I miss something because my poor english ? Looking above picture first I think about was beer can top with oppening mechanism Nenad your right it's a pull ring on top of a beer or soda can Yep !! JP is correct. Except mine came from cans of Jim Beam & Cola (ZERO sugar) Work of bashing genius !!!! :10_1_10: Thank Ye, Nenad. But only when I can conduct some trials. And only IF the idea actually doest work. mattsayers148 and GLakie 2 Quote CaptainSteve Current Build: HM Granado Bomb Vessel (Caldercraft) My BathTub: Queen Anne Barge (Syren Ship Models) Log: Queen Anne Barge (an build log) Bounty Launch (Model Shipways) Log: Bounty Launch by CaptainSteve Apostol Felipe (OcCre) HMS Victory (Constructo) Check It Out: The Kit-Basher's Guide to The Galaxy Website: The Life & Boats of CaptainSteve
CaptainSteve Posted April 23, 2015 Author #323 Posted April 23, 2015 (edited) Okay, I'm in too! Looks like you have some really interesting mods going on here. Oh, and for the record, I don't have OCD..................... I have CDO...............'cause the letters really should be in the correct alphabetical order! Welcome aboard, Grant. (By the way ... I should have the REAL table-saw early next week.) I have two mates who have the same affliction. And when they get together it's an installment of "The Bickerson's", nattering back and forth on some detail. They're a hoot! This will be a most interesting build. I should be organizing an official CDO/OCD stand .... only problem is that my build would be finished before we could all agree WHERE it should be located. Edited May 19, 2015 by CaptainSteve Salty Sea Dog, gjdale, mattsayers148 and 2 others 5 Quote CaptainSteve Current Build: HM Granado Bomb Vessel (Caldercraft) My BathTub: Queen Anne Barge (Syren Ship Models) Log: Queen Anne Barge (an build log) Bounty Launch (Model Shipways) Log: Bounty Launch by CaptainSteve Apostol Felipe (OcCre) HMS Victory (Constructo) Check It Out: The Kit-Basher's Guide to The Galaxy Website: The Life & Boats of CaptainSteve
mtaylor Posted April 24, 2015 #324 Posted April 24, 2015 Not just where, but which way it needs to face, what color, and then there'll be someone constantly wiping any fingerprints off. mattsayers148, GLakie, Canute and 1 other 4 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Salty Sea Dog Posted April 24, 2015 #325 Posted April 24, 2015 You wouldn't have to worry about the stand being finished before you figured out where to put it if I offered to help build it. It might end up with too many details though for anyone to be able to sit in it though. GLakie, CaptainSteve, Canute and 2 others 5 Quote -Buck Current build: AL Morgan's Whaleboat (1st build) Kits in the ships locker: I cannot confirm nor deny that there may be a few kits in there...
mattsayers148 Posted April 24, 2015 #326 Posted April 24, 2015 Hey CaptainSteve, I wonder if it's possible to design removable planking? Salty Sea Dog, GLakie, Canute and 1 other 4 Quote Matt - aka The Squirrel Whisperer Current builds - Benjamin W. Latham by Matt Competed builds - USS Ranger by Matt HMS Bounty Launch by Matt 18th Century 10" Sea Mortar by Matt 18th Century Naval Smoothbore by Matt Future builds - Willie L. Bennett Chesapeake Bay skipjack (MS) Half Moon (Corel) Emma C Berry Lobster Smack (MS)US Brigantine Eagle (Corel) New Bedford Whaleboat (MS)
CaptainSteve Posted April 24, 2015 Author #327 Posted April 24, 2015 (edited) Mine quite often IS, Matt ... this is why my accountant recommends I buy shares in Isopropyl !! Edited April 24, 2015 by CaptainSteve GLakie, Jack12477, Salty Sea Dog and 2 others 5 Quote CaptainSteve Current Build: HM Granado Bomb Vessel (Caldercraft) My BathTub: Queen Anne Barge (Syren Ship Models) Log: Queen Anne Barge (an build log) Bounty Launch (Model Shipways) Log: Bounty Launch by CaptainSteve Apostol Felipe (OcCre) HMS Victory (Constructo) Check It Out: The Kit-Basher's Guide to The Galaxy Website: The Life & Boats of CaptainSteve
capnharv2 Posted April 24, 2015 #328 Posted April 24, 2015 Well, Isopropyl beats dynamite for removing planks-and it's cheaper Harvey Salty Sea Dog, mattsayers148, Canute and 4 others 7 Quote
CaptainSteve Posted April 24, 2015 Author #329 Posted April 24, 2015 Well, Isopropyl beats dynamite for removing planks-and it's cheaper Harvey Also, Harv', less vacuuming is needed afterwards ... Jack12477, gjdale, mattsayers148 and 2 others 5 Quote CaptainSteve Current Build: HM Granado Bomb Vessel (Caldercraft) My BathTub: Queen Anne Barge (Syren Ship Models) Log: Queen Anne Barge (an build log) Bounty Launch (Model Shipways) Log: Bounty Launch by CaptainSteve Apostol Felipe (OcCre) HMS Victory (Constructo) Check It Out: The Kit-Basher's Guide to The Galaxy Website: The Life & Boats of CaptainSteve
mtaylor Posted April 25, 2015 #330 Posted April 25, 2015 Well, Isopropyl beats dynamite for removing planks-and it's cheaper Harvey But not as much fun.... capnharv2, mattsayers148, Salty Sea Dog and 3 others 6 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.