king derelict Posted November 16, 2021 Share #1 Posted November 16, 2021 I can't leave those Emhar boxes alone. While the parts were printing and the epoxy was drying for the corvette and the paint was drying on the Mark IV I took a peek in the Emhar Whippet box, I'm not sure if this is a later Emhar offering but the detail seems a bit better and the parts come sealed in a plastic bag with the instructions and decals. The instructions are simple but there are only about twenty parts For the Whippet a better attempt has been made on the Hodgekiss machine guns compared to the thick rods that represented the Lewis guns on the Mark IV. The tracks and running gear is a single moulding with a back side that closes it up. The fit is good; all the parts went together nicely once the sprue locations were cleaned up. So that's all the parts from the sprues used up And shortly afterwards its all together And off to be painted with black primer in the morning. Thanks for looking Alan GrandpaPhil, Canute, Edwardkenway and 6 others 9 Quote Link to comment Share on other sites More sharing options...
Old Collingwood Posted November 16, 2021 Share #2 Posted November 16, 2021 Another excellent build and another one for you to get your eyes on when you visit the Tank Museum at Bovington, here is theirs - OC. Edwardkenway, EricWilliamMarshall, Egilman and 7 others 10 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Old Collingwood Posted November 16, 2021 Share #3 Posted November 16, 2021 Dont know if you have the link to Bovington? but here is the link - https://tankmuseum.org/ OC. popeye the sailor, Egilman, Canute and 3 others 6 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
mtaylor Posted November 16, 2021 Share #4 Posted November 16, 2021 There's a nice amount of detail on such a "simple" model. Jack12477, Canute, Egilman and 4 others 7 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
king derelict Posted November 17, 2021 Author Share #5 Posted November 17, 2021 20 hours ago, Old Collingwood said: Another excellent build and another one for you to get your eyes on when you visit the Tank Museum at Bovington, here is theirs - OC. Thank you for the great photo OC. The Bovington Whippet is one of the decal options in the kit. There are eight options. Five British, one German, one Soviet and one Japanese. The Bovington Whippet is the one Lieutenant Sewell was commanding when he won his VC. I read this snippet regarding the Whippets in action at Amiens. During this battle, one Whippet – Musical Box – advanced so far it was cut off behind German lines. For nine hours it roamed at will, destroying an artillery battery, an observation balloon, the camp of an infantry battalion and a transport column of the German 225th Division, inflicting many casualties. At one point, cans of petrol being carried on Musical Box's roof were ruptured by small-arms fire and fuel leaked into the cabin; the crew had to don gas masks to survive the fumes. Eventually, a German shell disabled it and as the crew abandoned the tank, one of them was shot and killed and the other two were taken prisoner. Old Collingwood, lmagna, Jack12477 and 4 others 7 Quote Link to comment Share on other sites More sharing options...
king derelict Posted November 17, 2021 Author Share #6 Posted November 17, 2021 20 hours ago, Old Collingwood said: Dont know if you have the link to Bovington? but here is the link - https://tankmuseum.org/ OC. Thanks OC. Its a tough choice the Fleet Air Arm or the Tank museum. Might have to try for both. Alan Edwardkenway, Old Collingwood, popeye the sailor and 1 other 4 Quote Link to comment Share on other sites More sharing options...
king derelict Posted November 17, 2021 Author Share #7 Posted November 17, 2021 20 hours ago, mtaylor said: There's a nice amount of detail on such a "simple" model. Hi Mark For a basic kit they do come together nicely. I think they are quite decent when painted. I think there is a Czech PE kit for teh Mark IV but I haven't been able to find it. Alan mtaylor, Jack12477, Old Collingwood and 3 others 6 Quote Link to comment Share on other sites More sharing options...
king derelict Posted November 17, 2021 Author Share #8 Posted November 17, 2021 The Whippet got its black primer coat and it looks like the small amount of filler on a couple of the seams was enough The machine guns might be a bit overscale but I think they will be better than home built ones I learnt today that the horizontal bars extending out of the front and rear hull are to allow canvas mudguards to be installed. Thanks for looking Alan Baker, GrandpaPhil, EricWilliamMarshall and 8 others 11 Quote Link to comment Share on other sites More sharing options...
king derelict Posted November 19, 2021 Author Share #9 Posted November 19, 2021 Most of the day was spent down the rabbit hole of 3D printing but I did manage to get a coat of olive drab on teh Whippet. i tried for thin coats to try to let the black primer shade some of the panel lines and angles. It seems moderately successful Thanks for looking Alan Canute, EricWilliamMarshall, Edwardkenway and 9 others 12 Quote Link to comment Share on other sites More sharing options...
bruce d Posted November 20, 2021 Share #10 Posted November 20, 2021 Hi Alan, the Whippet is shaping up and looks like a very nice kit. Just in case you haven't seen it, here is a 1918 photo of the cluttered-up storage arrangements on a Whippet. popeye the sailor, lmagna, Jack12477 and 7 others 10 Quote 🌻 STAY SAFE A model shipwright and an amateur historian are heads & tails of the same coin current builds: HMS Berwick 1775, 1/192 scratchbuild; a Slade 74 in the Navy Board style Mediator sloop, 1/48 - an 18th century transport scratchbuild French longboat - CAF - 1/48, on hold Link to comment Share on other sites More sharing options...
king derelict Posted November 20, 2021 Author Share #11 Posted November 20, 2021 4 minutes ago, bruce d said: Hi Alan, the Whippet is shaping up and looks like a very nice kit. Just in case you haven't seen it, here is a 1918 photo of the cluttered-up storage arrangements on a Whippet. Thank you Bruce - that is a great photo. Its interesting to see the canvas mudguards in place. That would be a really nice scene to try to model with the figures and the turret door open. I might have to get another kit and see if I can make it work. Many Thanks again Alan lmagna, Jack12477, bruce d and 5 others 8 Quote Link to comment Share on other sites More sharing options...
Baker Posted November 21, 2021 Share #12 Posted November 21, 2021 Nice work on the Whippet popeye the sailor, Edwardkenway, Old Collingwood and 5 others 8 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch To do : Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Si vis pacem, para bellum Link to comment Share on other sites More sharing options...
king derelict Posted November 23, 2021 Author Share #13 Posted November 23, 2021 On 11/21/2021 at 8:24 AM, Backer said: Nice work on the Whippet Thank you Patrick. These Emhar kits have been very enjoyable Alan Old Collingwood, Canute, Edwardkenway and 3 others 6 Quote Link to comment Share on other sites More sharing options...
king derelict Posted November 23, 2021 Author Share #14 Posted November 23, 2021 Not a lot of progress here; most of the effort has been with the 3D printer. I added the decals in preparation for washes and dirt. Putting the decals on at the end will leave them far too clean. Thanks for looking in Alan Edwardkenway, popeye the sailor, EricWilliamMarshall and 8 others 11 Quote Link to comment Share on other sites More sharing options...
Old Collingwood Posted November 23, 2021 Share #15 Posted November 23, 2021 Lovely job Alan. OC. mtaylor, Egilman, Baker and 4 others 7 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
king derelict Posted November 24, 2021 Author Share #16 Posted November 24, 2021 5 hours ago, Old Collingwood said: Lovely job Alan. OC. Thank you for the kind words OC. Time to dirty it up a bit. Alan Old Collingwood, Edwardkenway, Egilman and 2 others 5 Quote Link to comment Share on other sites More sharing options...
king derelict Posted November 24, 2021 Author Share #17 Posted November 24, 2021 The very diluted black oil paint wash was used to bring up some of the details. Dust and rust next Thanks for looking in Alan mtaylor, Canute, Landlubber Mike and 9 others 12 Quote Link to comment Share on other sites More sharing options...
king derelict Posted November 25, 2021 Author Share #18 Posted November 25, 2021 The Whippet has been duly dirtied up after adding a small amount of rust around the corners that might get banged. I was having trouble with the air brush so I may have gone a bit too far in places but overall, it's generated a dusty tank and toned down the marking nicely Some detail painting and the matt coat will finish this nice little build Thanks for looking Alan bruce d, Roger Pellett, Canute and 8 others 11 Quote Link to comment Share on other sites More sharing options...
Landlubber Mike Posted November 26, 2021 Share #19 Posted November 26, 2021 Looks great Alan! I'm sure a nice diversion from dealing with the printer... mtaylor, Edwardkenway, popeye the sailor and 5 others 8 Quote Mike Current Wooden builds: Amati/Victory Pegasus MS Charles W. Morgan Euromodel La Renommèe Plastic builds: SB2U-1 Vindicator 1/48 Five Star Yaeyama 1/700 Pit Road Asashio and Akashi 1/700 diorama Walrus 1/48 and Albatross 1/700 Special Hobby Buffalo 1/32 Eduard Sikorsky JRS-1 1/72 IJN Notoro 1/700 Akitsu Maru 1/700 Completed builds : Caldercraft Brig Badger Amati Hannah - Ship in Bottle Pit Road Hatsuzakura 1/700 Hasegawa Shimakaze 1:350 F4B-4 and P-6E 1/72 Accurate Miniatures F3F-1/F3F-2 1/48 Tamiya F4F-4 Wildcat built as FM-1 1/48 Special Hobby Buffalo 1/48 Citroen 2CV 1/24 - Airfix and Tamiya Entex Morgan 3-wheeler 1/16 Terminated build: HMS Lyme (based on Corel Unicorn) On the shelf: Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits Future potential scratch builds: HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans) Link to comment Share on other sites More sharing options...
king derelict Posted November 27, 2021 Author Share #20 Posted November 27, 2021 Thanks for the kind words Mike It has been a great distraction from frustrations with the printer Alan mtaylor, lmagna, Egilman and 4 others 7 Quote Link to comment Share on other sites More sharing options...
king derelict Posted November 27, 2021 Author Share #21 Posted November 27, 2021 I painted the matt varnish onto the Whippet and then touched up the rusty exhausts and the machine guns which had been dulled down too much by the dust layer. I think that finishes this one. I would like to get another kit and attempt a diorama based on the photo that Bruce provided. I think it would make an interesting scene. Thank you all for looking in and providing help and comments Alan EricWilliamMarshall, ccoyle, Canute and 8 others 11 Quote Link to comment Share on other sites More sharing options...
Old Collingwood Posted November 27, 2021 Share #22 Posted November 27, 2021 Another splendid little tank - really nice mate. OC. lmagna, Canute, Edwardkenway and 3 others 6 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
lmagna Posted November 27, 2021 Share #23 Posted November 27, 2021 (edited) Very nicely done Alan. I do have one question though. I thought that the flat panel to the right of the forward gun was the drivers viewport. Wouldn't that be clear? Or did they have a steel cover that could be dropped into place and just used the tiny gun viewing slits for navigation? Edited November 27, 2021 by lmagna Canute, Jack12477, popeye the sailor and 4 others 7 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
mtaylor Posted November 27, 2021 Share #24 Posted November 27, 2021 Wonderful work. I think your idea of a diorama is a good one. popeye the sailor, Old Collingwood, Edwardkenway and 2 others 5 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
king derelict Posted November 28, 2021 Author Share #25 Posted November 28, 2021 19 hours ago, lmagna said: Very nicely done Alan. I do have one question though. I thought that the flat panel to the right of the forward gun was the drivers viewport. Wouldn't that be clear? Or did they have a steel cover that could be dropped into place and just used the tiny gun viewing slits for navigation? Thanks for the kind comments, Lou It's not really visible in my photos of the model but you can see it in OCs photo of the real thing. There is a metal flap that hinges down leaving a slit for the driver to see through. I hadn't realised how limited visibility was in a locked down tank even relatively recently. I was reading about the Glosters at the Imjin. They were supported by a couple of Centurions which were operating with all hatches closed and they managed to get themselves stuck in ditches and the like a few times because they couldn't see well enough to avoid them Alan Egilman, Canute, popeye the sailor and 4 others 6 1 Quote Link to comment Share on other sites More sharing options...
king derelict Posted November 28, 2021 Author Share #26 Posted November 28, 2021 4 hours ago, mtaylor said: Wonderful work. I think your idea of a diorama is a good one. Thank you Mark. I think it would make a nice setting; kind of a domestic setting. I need to find some suitable figures. Alan popeye the sailor, Edwardkenway, Old Collingwood and 4 others 7 Quote Link to comment Share on other sites More sharing options...
king derelict Posted November 28, 2021 Author Share #27 Posted November 28, 2021 22 hours ago, Old Collingwood said: Another splendid little tank - really nice mate. OC. Thank you for the very kind comments OC I think it's time to get back to the ships now Alan Egilman, popeye the sailor, Canute and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Baker Posted November 28, 2021 Share #28 Posted November 28, 2021 A nice whippet, great work 👍 mtaylor, Jack12477, popeye the sailor and 4 others 7 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch To do : Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Si vis pacem, para bellum Link to comment Share on other sites More sharing options...
Edwardkenway Posted December 17, 2021 Share #29 Posted December 17, 2021 Another great little tank, Alan, lovely work! popeye the sailor, Egilman, mtaylor and 3 others 6 Quote Current builds; Henry Ramey Upcher 1:25 Providence whaleboat- 1:25 HMS Winchelsea 1764 1:48 Completed: HM Cutter Sherbourne- 1:64- finished Triton cross section scratch- 1:60 - finished Non ship: SBD-3 Dauntless 1:48 Hasegawa -FINISHED Link to comment Share on other sites More sharing options...
king derelict Posted December 19, 2021 Author Share #30 Posted December 19, 2021 On 12/17/2021 at 1:40 PM, Edwardkenway said: Another great little tank, Alan, lovely work! Thank you for the nice comments Edward. This was a nice little kit and an interesting subject. Enough that I bought another with diorama intentions Alan Jack12477, Edwardkenway, popeye the sailor and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.