Jump to content

Recommended Posts

Posted

Decided I needed to think about mounting the Puffer before I got onto the delicate rigging phase. Used a small rectangular piece of MDF then made a sea “texture” using Gesso. Painted using a mix of brown, crimson and Phthalo blue, with some light highlights for the wake and a few wave tops. Nothing too over the top. Finished in Acrylic gloss medium and gloss varnish 

3807B4C1-3CC4-4E21-9C0E-A1865DB3DA14.jpeg

55D14165-D8C5-4A72-80F5-FF8606EF1EA3.jpeg

06FC3120-649C-4E01-A4A3-8C6764FDEA59.jpeg

5CBE3047-2D9F-499F-9FD7-732EBB8033EC.jpeg

Andrew
Current builds:- HM Gun-brig Sparkler - Vanguard (1/64) 
HMAV Bounty - Caldercraft (1/64)

Completed (Kits):-

Vanguard Models (1/64) :HM Cutter Trial , Nisha - Brixham trawler

Caldercraft (1/64) :- HMS Orestes(Mars)HM Cutter Sherbourne

Paper Shipwright (1/250) :- TSS Earnslaw, Puffer Starlight

 

Posted
39 minutes ago, ccoyle said:

 

(whispers) Do it.

Another Victim about to fall to the “Dark Arts” 👹

Andrew
Current builds:- HM Gun-brig Sparkler - Vanguard (1/64) 
HMAV Bounty - Caldercraft (1/64)

Completed (Kits):-

Vanguard Models (1/64) :HM Cutter Trial , Nisha - Brixham trawler

Caldercraft (1/64) :- HMS Orestes(Mars)HM Cutter Sherbourne

Paper Shipwright (1/250) :- TSS Earnslaw, Puffer Starlight

 

Posted

Very nicely done Andrew,  you'll be on to a 3 mast Square rigger in no time😁

Current builds;

 Henry Ramey Upcher 1:25

Providence whaleboat- 1:25     HMS Winchelsea 1764 1:48 

Completed:

HM Cutter Sherbourne- 1:64- finished    Triton cross section scratch- 1:60 - finished 

Non ship:  SBD-3 Dauntless 1:48 Hasegawa -FINISHED

 

 

Posted

That's a great looking Puffer Andrew. I see you have the larger Northlight Puffer waiting to be built, I also have one patiently waiting it's turn but I can't start it until you begin yours, so I can see how to build it, same as with Nisha😉

Posted
1 hour ago, Andyrew said:

That's a great looking Puffer Andrew. I see you have the larger Northlight Puffer waiting to be built, I also have one patiently waiting it's turn but I can't start it until you begin yours, so I can see how to build it, same as with Nisha😉

Ah that is good news, I have had my old Caldercraft “Northlight” Puffer years and just chickened out of doing it!  If we were each other’s “Wingman” we might just build them!  🤣 A dual build if you like.
You have given me an idea - hold my beer….

Andrew
Current builds:- HM Gun-brig Sparkler - Vanguard (1/64) 
HMAV Bounty - Caldercraft (1/64)

Completed (Kits):-

Vanguard Models (1/64) :HM Cutter Trial , Nisha - Brixham trawler

Caldercraft (1/64) :- HMS Orestes(Mars)HM Cutter Sherbourne

Paper Shipwright (1/250) :- TSS Earnslaw, Puffer Starlight

 

Posted
30 minutes ago, AJohnson said:

Ah that is good news, I have had my old Caldercraft “Northlight” Puffer years and just chickened out of doing it!  If we were each other’s “Wingman” we might just build them!  🤣 A dual build if you like.
You have given me an idea - hold my beer….

I looked at my Northlight the other week and though I'll leave it a while longer it might build itself. Not a good idea to ask me to hold your beer you'll get an empty glass back 🙂

Posted

Here you go, after much rummaging in the garage and disturbed dust and spider webs we have this Ol’ girl awaiting her turn on the slipway. 
I have had this years, - you can tell by the state of the “Dead Sea Scrolls” that pass for plans! 🤣

I this bought from an old chap who said he would not get around to building it (I’m in danger of following that path myself if not careful!)

Interesting to compare a 1/32 to 1/250 scale Puffer. 

54DFE10A-D992-49D4-97F1-26C4821F32BD.jpeg

Andrew
Current builds:- HM Gun-brig Sparkler - Vanguard (1/64) 
HMAV Bounty - Caldercraft (1/64)

Completed (Kits):-

Vanguard Models (1/64) :HM Cutter Trial , Nisha - Brixham trawler

Caldercraft (1/64) :- HMS Orestes(Mars)HM Cutter Sherbourne

Paper Shipwright (1/250) :- TSS Earnslaw, Puffer Starlight

 

Posted (edited)

Well thank you all for following along and the kind words and encouragement, these are the last few pictures of the finished model.

 

Final touches were the rigging, handrails, crew ladder and life rings made out of slices of plastic sprue that had a hole drilled in it.  Also added a little cotton wool glued along the waterline in places to 'hide' the base of the model.

 

Now, I really must get back to my Vanguard "Nisha" ! after this initial foray into card models 😄

IMG_0897.JPG

IMG_0889.JPG

IMG_0890.JPG

IMG_0891.JPG

IMG_0892.JPG

IMG_0893.JPG

IMG_0894.JPG

IMG_0895.JPG

IMG_0896.JPG

Edited by AJohnson

Andrew
Current builds:- HM Gun-brig Sparkler - Vanguard (1/64) 
HMAV Bounty - Caldercraft (1/64)

Completed (Kits):-

Vanguard Models (1/64) :HM Cutter Trial , Nisha - Brixham trawler

Caldercraft (1/64) :- HMS Orestes(Mars)HM Cutter Sherbourne

Paper Shipwright (1/250) :- TSS Earnslaw, Puffer Starlight

 

Posted (edited)

Forgot to add, the madness will return at some point, once I have knocked off a few nearly finished projects.....

 

Until next time Card Fans, keep taking the meds! 😆

IMG_0898.JPG

Edited by AJohnson

Andrew
Current builds:- HM Gun-brig Sparkler - Vanguard (1/64) 
HMAV Bounty - Caldercraft (1/64)

Completed (Kits):-

Vanguard Models (1/64) :HM Cutter Trial , Nisha - Brixham trawler

Caldercraft (1/64) :- HMS Orestes(Mars)HM Cutter Sherbourne

Paper Shipwright (1/250) :- TSS Earnslaw, Puffer Starlight

 

Posted

Well done Andrew, it looks great.

Richard

 

Next build:

Completed builds:

AL's Endeavour,  Corel's BellonaAmati's Xebec,  Billing's Roar Ege, Panart's Armed Launch

Ships' Boats - Vanguard 1:64 and Master Korabel 1:72

 Alexander Arbuthnot,  Christiaan Brunings,  Pevenseall by World of Paperships, card

HMS Pegasus by Victory

Captain John Smith's Shallop by Pavel Nitikin

Rumpler "Taube" 1911 by HMV, card

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...