Jump to content

Frigate Essex by Rafine - FINISHED - Model Shipways - Kitbashed


Recommended Posts

"Drilling and filling" took less time than I thought that it would and, so, the treenailing  of the deck is done. I chose to fill with the lighter Golden Oak filler for the holly deck, rather than the Walnut that I used on the boxwood hull planking. After sanding, I finished the deck with Wipe-on Poly to seal and protect.

 

With the deck done, I have multiple choices as to what to do next. While the temptation is high to do some fun stuff, probably, in keeping with long standing habits, I'll drill all of the holes for the inner bulwark eyebolts, ringbolts and cleats.

 

Bob

 

 

post-186-0-36065900-1388673726_thumb.jpg

post-186-0-96681400-1388673751_thumb.jpg

post-186-0-81808400-1388673773_thumb.jpg

post-186-0-19019800-1388673797_thumb.jpg

post-186-0-41631300-1388673818_thumb.jpg

Link to comment
Share on other sites

Hi Bob,

 

Your deck is really looking great !

I love that tree nailing of yours !

You drill the holes and then ??? toothpicks ?

Or did you use something else ?

 

animaatjes-sjors-94584.gif

Link to comment
Share on other sites

Link to comment
Share on other sites

Link to comment
Share on other sites

Hi Bob:

 

Beautiful looking deck! you must have either put a lot of elbow grease into the deck to neaten up the treenails or been incredibly painstaking and precise in your application of the wood filler! I think it must be just me, but that method always resulted in quite a bit of messiness (though my mode of application - fingers - was very crude!). Anyway, it looks great!

 

Can I ask why you went with the wood filler approach? Is it a scale issue or just your personal preference?

hamilton

current builds: Corel HMS Bellona (1780); Admiralty models Echo cross-section (semi-scratch)
 
previous builds: MS Phantom (scuttled, 2017); MS Sultana (1767); Corel Brittany Sloop (scuttled, 2022); MS Kate Cory; MS Armed Virginia Sloop (in need of a refit); Corel Flattie; Mamoli Gretel; Amati Bluenose (1921) (scuttled, 2023); AL San Francisco (destroyed by land krakens [i.e., cats]); Corel Toulonnaise (1823); 
MS Glad Tidings (1937) (in need of a refit)HMS Blandford (1719) from Corel HMS GreyhoundFair Rosamund (1832) from OcCre Dos Amigos (missing in action); Amati Hannah (ship in a bottle); Mamoli America (1851)Bluenose fishing schooner (1921) (scratch); Off-Centre Sailing Skiff (scratch)
 
under the bench: MS Emma C Barry; MS USS Constitution; MS Flying Fish; Corel Berlin; a wood supplier Colonial Schooner Hannah; Victory Models H.M.S. Fly; CAF Models HMS Granado; MS USS Confederacy

Link to comment
Share on other sites

Great deck Bob. I use the wood paste method as well but made mine even paler than yours by mixing in neutral paste with the palest other colour that I could find. Kind of crazy as the nails become almost invisible - yours might be the better choice but too late for me.

 

Cheers

Alistair

Cheers

Alistair

 

Current Build - HMS Fly by aliluke - Victory Models - 1/64

https://modelshipworld.com/topic/34180-hms-fly-by-aliluke-victory-models-164/

Previous Build  - Armed Virginia Sloop by Model Shipways

 

Previous Build - Dutch Whaler by Sergal (hull only, no log)

 

Link to comment
Share on other sites

Thanks Hamilton and Alistair and thanks also to the "likes" for your continuing interest.

 

Hamilton, I'm not sure why the filler would be a problem. I'll bet that I'm as messy with it as you are -- I also use my fingers. I did three lines of treenails at a time so that it never seemed overwhelming and the sanding went pretty quickly. I've done both real treenails and filler in the past. The filler is certainly quicker and easier and at this scale (1:77) just seemed to be a more feasible approach.

 

Alistair, your way is probably more "right" than mine, but I just liked the way it looked when I did some trials.

 

Bob

Link to comment
Share on other sites

Hi Bob, She’s coming along very nicely. I understand what you are saying about switching

to something a little more “fun” once in a while but then there are good points for just

diving in and getting those pesky treenails done. ;) 

Rusty

"So Long For Now" B) 

 

Current Builds: Speedwell

 

 

Completed Build Logs:  HMS Winchelsea 1/48   Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Nice work Bob. I like the treenailing method. I think the color difference turned out quite well.

 

- Bug

Link to comment
Share on other sites

A very small change of plan. I decided to do the scuppers and bulwark sheaves, before moving to the inner bulwark drilling. Like on many other things  on this build, scale has caused me to simulate these items. 

 

The scuppers were drilled from both sides and do not connect, although I tried to position them as closely as possible to direct lines. I also did not use tubing, but merely painted them with Floquil graphite to represent the lead liners. The painting was done with a toothpick.

 

The sheaves are also "fakes", consisting of two drilled holes with the space between them deeply scribed to represent the sheave.The scribed line was blackened using an ultra fine marker.

 

Bob

 

 

post-186-0-27831800-1388931485_thumb.jpg

post-186-0-92959300-1388931515_thumb.jpg

post-186-0-17789000-1388931543_thumb.jpg

post-186-0-15828000-1388931570_thumb.jpg

Link to comment
Share on other sites

Link to comment
Share on other sites

Good idea with the sheaves.  I've been procrastinating mine to determine exactly how I want to tackle them.

 

- Bug

Link to comment
Share on other sites

Hi Bob

I have an enjoyable hour or so reading through your log.I have to say wonderful work.Very commendable how you have managed to work through errors in the supplied parts and still end up with nice lines.I have had to do this myself before and it is not a nice job.

 

Kind Regards Nigel

Currently working on Royal Caroline

Link to comment
Share on other sites

Nice job on the scuppers and sheaves. I think they really add to the look. If you hadn’t fessed

up on the scuppers no one would have known! :) 

Rusty

"So Long For Now" B) 

 

Current Builds: Speedwell

 

 

Completed Build Logs:  HMS Winchelsea 1/48   Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Rusty - if he hadn't have fessed up I'd have never learned the trick!  :P

 

- BUg

Link to comment
Share on other sites

Thanks Rusty, Bug and B.E. for the nice comments and the vote of confidence for "faking it". B.E., you're right that one of the scuppers is for the pump dales, but nether the kit plans nor the AOTS drawings show any size difference.

 

Bob

Link to comment
Share on other sites

This is an update covering a little bit of this and a little bit of that. I started by attempting to drill all those inner bulwark holes for eyebolts and ringbolts. That came to a screeching halt when I broke my remaining drill bits and had to order more. While waiting for their arrival, I started making up ringbolts, a tedious task at best. I couldn't finish them or the eyebolts, however, because I am still waiting for arrival of some Birchwood Casey Brass Black.

 

I then decided to do the painting of the hull from the wales to the top of the copper. This was done with Pollyscale black. The edge is a little ragged in places, but this will be covered by the top of the copper. I also added pieces of molding at the joint of the hull and counter planking.

 

The drills then arrived and I immediately started breaking them again. Fortunately, I remembered an old trick. If even a small part of the cutting portion of the drill remains, they can still be used. In fact the broken drills worked as well and lasted longer than the unbroken ones. The holes are now done, but nothing installed in them yet.

 

Finally, I  experimented with the copper, and  began on doing it today. I'll post some pictures when I get enough done to be seen.

 

Bob

 

 

 

post-186-0-74971000-1389458136_thumb.jpg

post-186-0-60420700-1389458161_thumb.jpg

post-186-0-74160200-1389458186_thumb.jpg

Link to comment
Share on other sites

Hi Bob

For future reference,I pinched an idea from Dafi on his Victory build.If you drill a hole in the end of a BBQ skewer and glue the drill bit into this.You can feed this through the gunport on the opposite side to the bulwark you are drilling.I have found it much kinder to drillbits and miles easier than using a pin vise in the restricted space.

 

Kind Regards Nigel

Currently working on Royal Caroline

Link to comment
Share on other sites

Variety is the spice of life!  It all counts as progress.  Always nice to have a little something to cover that edge.....I've got a small molding myself.  Can't wait to see your copper.

Augie

 

Current Build: US Frigate Confederacy - MS 1:64

 

Previous Builds :

 

US Brig Syren (MS) - 2013 (see Completed Ship Gallery)

Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery)

Victory Cross Section (Corel) - 1988

Essex (MS) 1/8"- 1976

Cutty Sark (Revell 1:96) - 1956

Link to comment
Share on other sites

Link to comment
Share on other sites

Hey Bob, I've got a whole pile of broken drill bits I still use!

 

-Bug

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...