HMS Sphinx 1775 by Ronald-V - Vanguard Models - 1:64

[Ronald-V]

47 minutes ago, Theodosius said:

I think your Sphinx has become the gold standard! Just perfect in my eyes!

Thank you Theodosius! That's a generous compliment! 🙏

[Ronald-V]

Does anyone think the space between the rudder and the hull is too large? It seems okay, right? According to the drawing, it should be a millimeter, and mine is 1.5. So it's pretty close. When I first attached the rudder, I thought...the space seems too large? But now that I've looked at it a few times and taken a picture, it seems okay (perhaps also a bit influenced by Blue Ensign, who thought the space was too large and adjusted it  ) 

 

It's sometimes a bit difficult to see in other logs regarding the angle of the photo, so I thought...let me ask what others think.

By the way, there is practically no space between the edge of the hole where the rudder fits in...but in principle that is not noticeable  

 

Edited yesterday at 10:02 AM by Ronald-V

[Theodosius]

If you like it the way it is, then it is fine. On the other hand, if you arn't totaly happy with it, change it :-).

 

Only one suggestion: 1/2 a mm is not much, but relative to the 1mm, that it should be, thats 50% more 😉 . 

[Ronald-V]

24 minutes ago, Theodosius said:

If you like it the way it is, then it is fine. On the other hand, if you arn't totaly happy with it, change it :-).

 

Only one suggestion: 1/2 a mm is not much, but relative to the 1mm, that it should be, thats 50% more 😉 . 

You're absolutely right, the problem is... the gudgeon pintle patterns are as far into the holes as they can go. So, in terms of design, this should be the intention. If I wanted the gape narrower than in the drawing, I'd have to modify the pintle patterns (probably file them a bit off). I think this is simply the difference that can occur between a drawing and the actual execution (including all the parts).

 

So yes...your first statement applies here...  

 

Just wondering if others had the same result  

Edited yesterday at 11:23 AM by Ronald-V

[Blue Ensign]

Hi Ronald, the gap does look a little wide to my eye.

I didn't use the kit set-up on my build of Sphinx, I opted for a working version of gudgeons and pintles and tweaked the set up until my eye was satisfied.

 

On Indefatigable I did use the kit simplified version but they look a little closer than on your photo.

 

Could you perhaps countersink the holes on the stern post to allow the gudgeon to sit further in?

 

B.E.

[Thukydides]

I agree with the others. They are probably just a little too far out. As BE said maybe countersink the holes a bit to allow them to go in further.

 

Also if it looks funny to you now, it will be even more annoying to you in a month (I am speaking from experience).

[Ronald-V]

2 minutes ago, Thukydides said:

I agree with the others. They are probably just a little too far out. As BE said maybe countersink the holes a bit to allow them to go in further.

 

Also if it looks funny to you now, it will be even more annoying to you in a month (I am speaking from experience).

 

22 minutes ago, Blue Ensign said:

Hi Ronald, the gap does look a little wide to my eye.

I didn't use the kit set-up on my build of Sphinx, I opted for a working version of gudgeons and pintles and tweaked the set up until my eye was satisfied.

 

On Indefatigable I did use the kit simplified version but they look a little closer than on your photo.

 

Could you perhaps countersink the holes on the stern post to allow the gudgeon to sit further in?

 

B.E.

 

Thanks for checking in guys...countersink the holes is indeed an option. I will look into that. And your right regarding that if in doubt now...it can be annoying later on. 

[Ronald-V]

Okay, just a quick adjustment before F1 starts... I slightly countersunk the holes in the stern and it looks much better!

 

Thanks for the help guys!

 

Edited yesterday at 12:59 PM by Ronald-V

[Frecap]

 

 

Very painstaking and high-quality work! A work of art, just like the entire model! It's a pleasure to look at!

Edited 5 hours ago by Frecap

[Ronald-V]

4 hours ago, Frecap said:

Очень кропотливая и качественная работа! Произведение искусства, как и вся модель! Приятно смотреть!

 

Very painstaking and high-quality work! A work of art, just like the entire model! It's a pleasure to look at!

Thank you Frecap! That's very kind of you to say! 👍

 

And everyone else als thank you for looking in and the likes, appreciate it a lot!

Edited 2 hours ago by Ronald-V