Cabbie Posted May 23, 2016 #181 Posted May 23, 2016 Nothing clumsy with your work hq, very precise and good to look at. Chris Canute and mtaylor 2 Quote HM Cutter Mermaid 1817 HMB Endeavour 1768 by Cabbie - Artesania Latina - 1:60 - Kit Fiddle Every action has a consequence
harlequin Posted May 24, 2016 Author #182 Posted May 24, 2016 Boat boom and then 3 added in position to the gangways. MEPering, Cabbie, cristikc and 7 others 10 Quote
donrobinson Posted May 24, 2016 #183 Posted May 24, 2016 I have to agree with Chris, very nice to look at. Great work Canute, harlequin and mtaylor 3 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
harlequin Posted May 24, 2016 Author #184 Posted May 24, 2016 the camera doesn't pick all the mistakes up....compared with some of the builders on here my efforts pale. mtaylor and Canute 2 Quote
harlequin Posted May 25, 2016 Author #185 Posted May 25, 2016 drilling planksheer for the handrail stanchions. Canute and mtaylor 2 Quote
harlequin Posted May 30, 2016 Author #186 Posted May 30, 2016 (edited) ships wheel and binnacle....the binnacle was painted with an oak paint and primer to cover the etched brass then the glass was obtained by using a soft HB pencil. Edited May 30, 2016 by harlequin tadheus, Canute and mtaylor 3 Quote
harlequin Posted May 30, 2016 Author #187 Posted May 30, 2016 belay pin rack....I've added a brass rod to the bottom of each post for added security when attaching to the deck. And in position on the fordeck. Canute, mtaylor, kier and 2 others 5 Quote
harlequin Posted June 3, 2016 Author #188 Posted June 3, 2016 Bow bulwark timbers being added.....such small bits have tested my patience today. Canute, mtaylor, GrantGoodale and 1 other 4 Quote
harlequin Posted June 4, 2016 Author #189 Posted June 4, 2016 lately i have been using some aliphatic rapid wood glue......best glue i have used for ages,,,,i've used the standard stuff for years but this is a great discovery for me. Where have i been all these years? Canute 1 Quote
harlequin Posted June 7, 2016 Author #190 Posted June 7, 2016 Bow top rail and timbers.....why is it that when you offer a dry fitting and it fits perfectly...when you add glue it doesn't?....one of life's mysteries. mtaylor, kier and Canute 3 Quote
harlequin Posted June 9, 2016 Author #191 Posted June 9, 2016 (edited) bow timbers...... these are worse than ratlines. Edited June 9, 2016 by harlequin mtaylor, kier and Canute 3 Quote
harlequin Posted June 9, 2016 Author #192 Posted June 9, 2016 (edited) poop deck bulwark timbers added...reasonably happy with the outcome. Edited June 9, 2016 by harlequin Canute, mtaylor, hamilton and 3 others 6 Quote
hamilton Posted June 14, 2016 #193 Posted June 14, 2016 She continues to shape up nicely Harlequin! hamilton Canute and mtaylor 2 Quote current builds: Corel HMS Bellona (1780); Admiralty models Echo cross-section (semi-scratch) previous builds: MS Phantom (scuttled, 2017); MS Sultana (1767); Corel Brittany Sloop (scuttled, 2022); MS Kate Cory; MS Armed Virginia Sloop (in need of a refit); Corel Flattie; Mamoli Gretel; Amati Bluenose (1921) (scuttled, 2023); AL San Francisco (destroyed by land krakens [i.e., cats]); Corel Toulonnaise (1823); MS Glad Tidings (1937) (in need of a refit); HMS Blandford (1719) from Corel HMS Greyhound; Fair Rosamund (1832) from OcCre Dos Amigos (missing in action); Amati Hannah (ship in a bottle); Mamoli America (1851); Bluenose fishing schooner (1921) (scratch); Off-Centre Sailing Skiff (scratch) under the bench: MS Emma C Barry; MS USS Constitution; MS Flying Fish; Corel Berlin; a wood supplier Colonial Schooner Hannah; Victory Models H.M.S. Fly; CAF Models HMS Granado; MS USS Confederacy
Bill Morrison Posted July 2, 2016 #194 Posted July 2, 2016 I just discovered this thread. I am most impressed! Bill mtaylor, Canute and maddog33 2 1 Quote
harlequin Posted March 17, 2018 Author #195 Posted March 17, 2018 hello everyone....been a while since I was last here. Canute and Old Collingwood 2 Quote
Sailor1234567890 Posted March 18, 2018 #196 Posted March 18, 2018 Glad to see you back. Any updates for us? How's Bellona doing? Old Collingwood and Canute 2 Quote
harlequin Posted March 18, 2018 Author #197 Posted March 18, 2018 notdone much for a while.....will post soon with a couple of pics. Old Collingwood and Canute 2 Quote
Old Collingwood Posted March 19, 2018 #198 Posted March 19, 2018 On 17/03/2018 at 11:30 PM, harlequin said: hello everyone....been a while since I was last here. Hello mate hows things. OC. Canute 1 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
harlequin Posted March 19, 2018 Author #199 Posted March 19, 2018 This will displease the purists but I don't have the time to take off or alter the planking and I think it would destroy the frames underneath so I have opted to use corels metal gunports not supplied with the kit......they come with corels hms victory and can be purchases separately but as things stand this is the only way Bellona is going to progress so love it or loath it I am taking this route. It is either that or Bellona stays unbuilt....onwards and upwards.....personally I don't think they look too bad. Martin W, Old Collingwood, Sea Hoss and 3 others 6 Quote
harlequin Posted March 19, 2018 Author #200 Posted March 19, 2018 nothing to do with the Bellona build but just a bit of rigging.......corels Greyhound and HMS Victory side by side. Martin W, Old Collingwood, Ferit and 5 others 8 Quote
harlequin Posted March 20, 2018 Author #201 Posted March 20, 2018 gunports fitted....reasonably pleased with them....the others are open gunports and will need finishing off. Canute, Landlubber Mike and Old Collingwood 3 Quote
harlequin Posted April 28, 2018 Author #202 Posted April 28, 2018 Gunports now completed on both sides now.......only the port side second planking to finish and various handrails and furniture to complete the hull. Jobbie, Canute, Altduck and 3 others 6 Quote
harlequin Posted May 2, 2018 Author #203 Posted May 2, 2018 Bellona.......so far from above. goetzi73, Canute, Altduck and 6 others 8 1 Quote
Old Collingwood Posted May 3, 2018 #204 Posted May 3, 2018 Very nice work. OC. Canute 1 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
bill24 Posted May 9, 2018 #205 Posted May 9, 2018 Hi Harlequin, I must say the Bellona is looking fantastic. just about to start again on my Bellona, I have not touched her for 3 years, been busy with work and DIY on the house (hopefully now I can move forward). I am struggling with the quarter galley's, cannot get the shape right or the correct amount of taper from the top to the bottom, any suggestions would be very much appreciated. Bill24 Canute and Old Collingwood 2 Quote
harlequin Posted May 15, 2018 Author #206 Posted May 15, 2018 (edited) hi Bill...............its been that long since I did the quarter galley I cant really remember.....I did struggle a bit with it I think....more luck than skill on my part I think. I have also used corels gun ports...I just don't have the inclination to re-plank the hull....had to strip it once due to the wood fading as I had not worked on it for ages.....they look ok so I can live with them. Edited May 15, 2018 by harlequin Canute 1 Quote
Old Collingwood Posted May 15, 2018 #207 Posted May 15, 2018 She is looking very smart and will really compliment your other builds, talking of other builds - have you been following my build lately? its still the same one you commented on some time back, its getting there slowly. OC. Canute 1 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
harlequin Posted May 24, 2018 Author #208 Posted May 24, 2018 notice the mouse eaten plans...they live in my workshop and even come out to see what I am up to occasionally. Canute and Zapto 2 Quote
harlequin Posted June 8, 2018 Author #209 Posted June 8, 2018 (edited) second planking now complete......needs a few tiny fill in pieces and a repair veneer to the front bow keel where I dropped it and snapped it off....Bellona has become somewhat battered and is full of tiny marks where it has been scratched and banged but I think it adds to the character of the ship. A final sanding down is all that is required now. Included a pic of my revamped work space....shows several minicraft drills and power tools. Edited June 8, 2018 by harlequin Canute, Jobbie, DenPink and 4 others 7 Quote
harlequin Posted June 11, 2018 Author #210 Posted June 11, 2018 Rudder and hinges. Jobbie, DenPink, Kevin and 3 others 6 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.