GuntherMT

You could try making your own out of blackened wire.  You should be able to get blackened wire from jewelry supply store, but if you use the easy to use copper, you'll probably have to do touch-up paint after, as it's fairly easy to scratch the blackened color off while working with it.

The coils look really good.  How about showing us your jigs for making them?

That would require that I was taking pictures as I went through them.    I was mostly just using toothpicks (round) stuck in Balsa along with another flat toothpick for the tail end that hangs out.  Now that I think I've got the spacing about right, I'll find something that the glue won't stick to as easily, probably brass tubing, as I don't have any appropriately sized nails to use.  Pretty much the same thing as Dan Vadas used here - http://modelshipworld.com/index.php/topic/230-hms-vulture-by-dan-vadas-1776-148-scale-16-gun-swan-class-sloop-from-tffm-plans-completed/page-101?hl=%2Brope+%2Bcoil#entry339219

I tried using the tiny brass nails, but they ended up too narrow, without any gap in the center of the coils to work with to hang them (before I started leaving the tail hanging out as part of the coil building process) and I kept messing up the coils trying to widen them after.  I then used multiple brass nails at either end, and it works 'ok', but the round toothpicks ended up being just about the right size I think.

So I haven't made much progress since my last update, and I've discovered that I don't really like rope coils very much.  Seems like a great thing to dislike given my subject choices, hahaha.. 

In any case, I'm working on getting a jig that makes coils I like, and I think I'm getting somewhat close, but still not there.

I started working at the stern, and I'm done with the stern, quarter-deck, boom, and shrouds now.  

The coils are taking much longer than I expected them to, but oh well.  Getting a bit better as I go along.

Thanks all, will get back to working on the final details tomorrow.  I've been pretty busy this week since finishing the anchors and haven't done anything since.  Today was day one of sailing lessons, and I'm completely exhausted, so probably not a great time to work on the ship!

Ratlines came out great Frank.  Glad I didn't have to tie that many!

Great looking deck Eric.  The nibbing came out great.

Google translate of the subject:

A bench made of iron

Google translate of the text:

A bench for three persons of iron forged on a scale of 13.47 for the Maerchenschiff.

The geschmiedetet iron is burnished.

-----------------------------

Beautiful work.

Most excellent work Dan, the lifeboats came out great!

Quite an impressive project, congratulations on reaching the finish line!

Even with the Syren blocks I drill them out based upon the size of line that specific block will be getting used with.  I guess it's just part of rigging ships!

Great looking rigging Brian - maybe you mentioned it elsewhere here - but did you replace the kit supplied rope? Whatever you're using it looks really nice

hamilton

Thank you hamilton,

All of the rigging, ropes, blocks, hearts, dead-eyes, and hooks - everything except for the bullseyes, are from Chuck at Syren Ship Model Company, as are the gun barrels (both swivels and main guns) and the main gun carriages.  The deck is holly planking from Hobby Mill, and the masting is all Boxwood from Crown Timberyard.

Holly friggin rigging! So glad I found and added this build log. I have been drooling at the chance of cutting my teeth on my own AVS. I also really like how the sections are labeled and separated. I hope this log stays up for while to use it as a supplement when I start construction. Very impressive build. (we're not worthy, we're not worthy) lol. 

I certainly have no plan to take the log down Philthy, and I'm very happy if it helps anyone with their own build of this kit (or even something else!).

Thanks for all the support and encouragement all.

I fixed the anchors.  The other one was a bit loose, so it required a longer setting glue, so it didn't make it into the photo.

You are experiencing the wonders of Model-Expo paint (Hint: It's hot garbage).

It works, but it makes you work for it, and the paint is extremely inconsistent from one jar to the next.

Awesome, looks like a great time!

Fantastic work Ken.

You finished two full rigged masts in less time than I did a single mast with only one square sail.

I'm impressed.

Could not agree with you more on the kit blocks too.

And... the anchor stocks are 90 degrees off from where they should be, so that will be a re-do on the anchors.  Oops.

I just use Syren line, so I can't really help you with materials, but I think that kit line is generally oversized, so I've chosen to go 'down' in size when given a choice between slightly smaller or slightly larger.

Note that there is exactly zero science behind this system, it's just my opinion based on what kit line normally looks like in my (fairly brief) experience.

Thank you gentlemen.  And now, for a bonus update.  I made some anchors!

 

If there are better materials you can recommend let me know where to buy it. I will not make my own rope.

 

Thanks!

I highly recommend Chuck's rope (Syren Ship Model Company - http://www.syrenshipmodelcompany.com/miniature-rope.php)

It's really great to work with, and I have no interest in making my own.

Looking forward to seeing how your modified wood selections work out Dave!

Your work amazes me every single time I look at it.  Thank you again for sharing the photo's of your ship as you go, simply stunning.

Crown has masting sets?  Wow....ya learn something new every day.

Sure, I sent Jason an email saying that I wanted the following stock (24" long):

2 - 1/2" square.

2 - 3/8" square.

3 - 1/4" square.

2 - 3/16" square.

He sent me a reply with the price, I paid him, and got a masting set!

I over-ordered so I would have plenty of extra if (when) I screwed something up on my first try!

Some of the scratch build logs will take away your productivity for days at a time, they are simply amazing.

A couple that totally captured all of my time for days (and I'm sure I've missed many):

Dan Vadas "Vulture" build (recently finished) - http://modelshipworld.com/index.php/topic/230-hms-vulture-by-dan-vadas-1776-148-scale-16-gun-swan-class-sloop-from-tffm-plans-completed/

rekon54's Le Fleuron build in 1:24 scale! - http://modelshipworld.com/index.php/topic/178-le-fleuron-by-rekon54-1729-124/

Boyd,

I gave up on dowels, and I'm only on my 2nd build!

A few problems with dowels - they have large grain, making them look poor unless you are planning to paint them, even if they are straight.  As you've observed, it's very difficult to get dowels that are straight.  On masts/yards that need a square or octagon shape, it's difficult to make that evenly out of a round stick.

For my AVS I ordered a 'masting set' from Crown Timberyard out of boxwood, and couldn't be happier with the result.  Making the masts/yards out of boxwood eliminated all of the above problems, and there are multiple ways to get your square-stock round for the masts/yards, from my system (a lathe) to Frank's system (check his Paragon build log here - http://modelshipworld.com/index.php/topic/10788-paragon-a-modified-mayflower-by-mahuna/).  He has a nice jig he used to help him turn square stock into his masting.  Look at post 70 on page 4 of his log.