Jump to content

reklein

Members
 View Profile  See their activity

  • Posts

    1,285

  • Joined

  • Last visited

 Content Type 

Everything posted by reklein

  1. reklein
    OOOHHHHH! I wanted this ship 15 yrs ago and passed it up as too expensive and time consuming. Now you have brought it to light again and I covet it dearly. Please say something terrible about this build so I can once again put it out of my head. Bill longing in Idaho
  2. reklein
    I made a close clearance throat plate for my Dremel from a piece of the correct gauge aluminum and raised the blade through it. Works great. Made a fence from some maple, A little fiddly but once set up it works good. I make custom miter gauges of wood for what ever angle I need. With small wood I usually do cutoff work with a NWSL chopper. Bill PS i have throat plates made of plywood for my 10 in Rigid table saw.
  3. reklein
    ARRRR!! Isabella, Yer ship is lookin mighty fine. Yer little pirate laddy is lookin mighty regretful for all his misdeeds, Maybe you could grant him mercy and press him into service on her majesty's ship. Bill in Idaho
  4. reklein
    I should say I do like the imaginative use of the laser cutter for these kinds of pprojects. Bill
  5. reklein
    Cool marker, but would have rather had ship parts than a tool one doesn't need til the hull is finished. This is a criticism of the kit producers and not Mr. Pucko. I admire your patience. Bill in Idaho
  6. reklein
    Looks like a pretty well made model and may be worth the conservation time. I like the q-tip/saliva idea and you might start in a place where its not too obvious and observe the results.Maybe even try different methods, I would NOT spray it with a cleaner though. Just do small areas at a time. You might even Google conservancy methods. Once its clean better get a case made or a glassed in alcove in your house. BILL
  7. reklein
    Nils if you are going to resin cast you little lifeboats, don't be tempted to use the high speed setting kind. There are problems with the material setting too fast to allow air bubbles to escape. Use a slower setting resin. I discovered this while trying to make landing craft for a 1/192 Victory ship. The resin is a little expensive but when you need to make a quantity of things it works out pretty nice. Also you might want to check Shapeways for already printed 3D boats. Bill in IdahoBeautiful work By The Way
  8. reklein
    I found some pretty nice mens handkerchiefs in Pennys that work pretty well. Didn't really follow up with the fine thread. A good fly fishing shop might be a good place to look for fine thread,not to mention rigging tools and beads etc. Bill in Idaho
  9. reklein
    Mike ,if you're interested in more paddle wheels,you may want to check out Interaction Hobbies, C.R. Lamb. Its a Canadian firm which may facilitate taxes and shipping etc. Their model is in 1/87 scale which makes for a nice little model to display. The prototype was use on Lake Okanogan. Its is laser cut from wood and "laser board" which is an epoxy impregnated wood. Not an easy kit to build but very satisfying. Bill in Idaho
  10. reklein
    Just discovered this nice project, I like your approach and admire your skills. bill in Idaho USA
  11. reklein
    If you have the plans and the hull cross sections are on them It would almost be easier to get a block of Basswood and carve your own. Start with bandsawing out the profiles and then carve from there. Bill
  12. reklein
    Beautiful plank job Sam, Bill
  13. reklein
    I got to meet the Interaction guy a a train meet in Salmon Arm BC last week hes got some new stuff coming out too. A nifty little boatworks in N-scale soon to be in 1/87th. The hotel the convention was in had a lot of historical fotos from the area including a sternwheeler working with logs. Ya sure wouldn't wanna get the wheel tangled up in the logs. Bill in Idaho
  14. reklein
    well, heres what I found at the local ACE and HD. They ARE made foe electrical use but the price is right and you can solder stuff to these. You can even make third hand units by soldering them to each end of a heavy piece of copper wire and put it in your little bench vise. Bill in Idaho
  15. reklein
    Kinda spendy at MicroMark considering its usually about $9 to ship plus the cost of the clips. Alligator clips should be found in any hardware store even Home Despot in the electrical section. Just checked online and they're $2.19 for a six pac or somethin like that. Bill
  16. reklein
    Looks very nice Nils. Bill
  17. reklein
    I like the rivet detail. It "reads really well. However I wonder if the railing brackets would benefit from flattening before wrapping around the rail. It might be they look fine with normal eyesight but they look too large in the photos. Beautiful work Nils. Bill rivet counting in Idaho
  18. reklein
    I don't believe I'd seal the first planking. My concern is that it will prevent the glue on the finish planking from penetrating . Painted surfaces tend not to glue well because the paint keeps the glue from penetrating and you end up just relying on the paint or sealer in this case to hold your parts together. I WOULD recommend sealing before painting to offer a smoother surface and to keep adjacent colors from flowing into each other as in the case of hull color and waterline. Bill
  19. reklein
    Wow! Just simply Wow!. I had a look at the rigging plans. They will surely save wear and tear on the ole head scratching in trying to figure out that scheme. Bill
  20. reklein
    be careful with modeling paste or Gesso. If has marble dust in it . It will be very hard and almost impossible to sand. If you need to fill in hollows from poor fairing I'd use a water base spackle first dampening the wood with water to help it adhere well to the wood. Then once you've achieved your filling and fairing you could scribe in plank seams and wood grain to get the character back. A pallete knife works well for spreading filler or if you're covering a large area a body shop plastic spreader works well. Bill
  21. reklein
    You might want to consider either epoxy resin or polyester resin to toughen and fill the hull. Maybe some very light weight glass cloth and then resin with filler in it to fill the weave. Bill
  22. reklein
    Nice tool !!. Is it from Grizzly? One of those would be a jewelers delight. Bill
  23. reklein
    Won't hurt to keep those spendy files in a plastic tube either. They will get dull rattling around in a drawer with other tools.
  24. reklein
    I understand that the white coating was white lead paint mixed with horsehair in some fashion and applied very thick. Bill
  25. reklein
    Torbogdan, thats a nice hull for a first timer. I hope you find that you like shipmodeling and that you'll remember your first mistakes. I had saying in art class. "if I had known it was gonna turn out this well. I would have used better paper" Bill in Idaho

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...