HardeeHarHar

2 hours ago, Peanut6 said:

Wow those are tiny.

Yes they are, but armed and dangerous!

Back on island time, with a paint brush in my hand.  Just about ready to finish attaching the stern details!

Wow!  That sounded tedious, thank you for your build log and perseverance!

It is true, you ROCK Ron.  What a beautiful build, and to offer up such historical information along the way further demonstrates what a true master craftsman you have become . Your Camilla is spectacular, and then you add the water....inspirational work my good man!  

It appears to be hard to locate specific issues of Model Shipwright or find the table of contents, and Robert Lichtley doesn't have much of a web presence.  It would be nice of CafModel to do a build log or sponsor someone to do a good build log of the split hull (hint hint), because the instructions for this seem to be quite lacking (at least for someone of my skill level = newbie/intermediate at best).  I will have to take a look at my part I kit when time permits to see how much information is provided that someone like me can understand.  I can definitely saw something in half though 😉

20 minutes ago, VTHokiEE said:

As for something else - what type of wow factor are you going for? The Sphinx looks like a great build.

Well, I upgraded the Granado to Boxwood planking on the hull, and have purchased and begun to employ Syren Ship Model rope, blocks, and deadeyes, etc. for the rigging.  I have also been encouraged to purchase boxwood for the masts, spars, etc as well, instead of using the birch wood that came with the kit.  So, one aspect of wow would be quality materials, the other aspects are appearance overall, historical impact/story.  I liked the Granado because it was a little different, being a bomb vessel and all, and was just difficult enough to make me sweat non-stop.  I really like your suggestion to work on the split hull in the background.  Maybe someday soon someone will elect to do it before me, and start a BUILD LOG!!!  One can hope!

My wife just this morning asked me what was on deck....as in what was going to be the next kit to be built at the Roanoke Island Ship Building Company (despite the fact that I am no where near completion of the Caldercraft Granado at this point in time).  I replied that I had already purchased and received part 1 of the CAFModel Granado kit that I was hoping to build in the split hull, exploded, 3 part version (see below image taken from Wikipedia) as a companion piece to the Caldercraft Granado (like a needle stuck in an album groove).  However, there has been no build log for the segmented build, and even the non-exploded kit looks extremely difficult and labor extensive to just make "another Granado".  I'd love to get people's opinions on how hard it would be to do the segmented build... and know whether there is a build log available from the manufacturer @cafmodel The instructions provided by Cafmodel for building the split hull are not adequate for a builder of my limited skill level, in my humble opinion.  In the absence of clear instructions or a super helpful build log for the split hull version, I am afraid I bought part 1 of a 3 part kit that will never be started.  Notwithstanding the foregoing, my wife then asked: "well you are just about finished with the Master Korabel Secret Vessel at the Durham Dry Dock, so what is next on the agenda there?".  And there was an awkward silence.  I don't know!  I would like to continue building sailing ships, and was considering the HMS Beagle, Bounty or the Endurance, but OcCre's kits don't appear to have great instructions or the wow factor I am looking for (please correct me if I am wrong here), and then looked at Vanguard's kits and considered the Sphinx as a next step up in skill level progression.  Of course the new project from Syren Ship Models has got my attention as well....but they may be a ways off in the future....

So, I am begging everyone to offer up their opinion on what kits I should be considering, so I can tell my wife and send her a link ;-).  Wouldn't attempting a split hull build of the Granado be a death wish?  It sure appears that way now, as there are only 2 build logs of the non-split hull so far.  

Hey ir3 - Thanks for taking your build onto the forum.  You know I am going to be following along with you and Jeff and any others who opt to build this kit and make their work public.  You are already doing a great job, and I hope you get your unlabeled parts identified.  That will be lesson number 1 for me:  LABEL ALL PARTS BEFORE REMOVING.  I have miles to go on my Caldercraft Granado, but when complete, I am thinking I will bite the proverbial cannonball and do the split hull version of the CAF model.  It will be an endeavor that is way above my talent level, and it should keep me busy for the rest of my life and then some....  I wonder if Tom has a build log of the split hull version?  

20 hours ago, ir3 said:

Hi Jeff,

 

I just started my Granado and in response to your December 19th, 2021, post, I am also finding that getting the glue joints perfectly square is quite difficult. I am in awe of the modelers that get these joint perfect. I am hoping the stem pieces are the most difficult and the job will get easier as time goes by. Thanks for doing the build thread. It will be very helpful.

I have this kit on the shelf (at least I have part 1 and 2), as I am currently finishing the Caldercraft Granado.  I was thinking it would be cool to do the CAF Model blown up in the three sections as a companion piece.  Due to the perceived level of difficulty, I am hoping that everyone who does this model will start a build log so others (like me) can learn from the experience of others.  So @ir3, I humbly encourage you to share your work with a build log 😃 

Best regards,

BT

Will be missing you and sending strength and prayers!

Thanks @ccoyle, I have rivets in lots of small sizes I purchased from the web.  I was thinking you just cut the rivet head off and glue it down.  No drilling needed.  Is that correct?

Just paddling along.  Wondering how to do the rivets next…

It keeps on looking good, and getting done fast!  You are a MACHINE!

I can only reiterate what all the others have already said.  You have amazing skills and execute them flawlessly.  It is such a wonderful thing to be able to electronically observe your master craftsmanship.  Thanks so much for sharing.  Stay safe and be well.

10 minutes ago, Oldsalt1950 said:

Brian, you may want to look at these: Scrapers . For the price it is a good investment and should cover all your bases.

 

Jim

Agreed!  Thanks Jim!!!

Hey Vane!  How on earth did you get two figureheads?  Were they just in the box?!?  I think you made the right call to make your own rail instead of using the brass provided in the kit.  In my case, getting the brass to shape to the hull and adhere with CA was a huge challenge.

2 hours ago, Knocklouder said:

You know I had to look up Trifecta lol

Lol, well its a good thing to learn a new word every now and again.  The next challenge is for you to use it in a sentence! 😃

@Peanut6 - I never said I did any of those things well, but I keep practicing!!!  I used to do leather craft when I was young, and I got very good at that.   I won’t be doing much leather work, but I do hope to put the drafting table to good use in the future!!!  It can even serve as a music stand too!  Believe you me, I do A LOT of windows Kev.  Way too many.  The salt water on the coast makes it a must if you want to see thru your windows.   I’d say I am not too bad at windows.  😜.  

p.s.
Turning oars with a file is painful, time to order that lathe…

Having fun, doing good work, and building things you can be proud of….a perfect trifecta! 

Turret added, metal work and oars up next!

3 hours ago, Peanut6 said:

Oh my, that is quite the find.  Very old school and probably weighs more than a few pounds.  Good for you 

Yessir, it weighs over 200 pounds.  I hope it works as I am hoping.  At the very least, it serves to remind me of all the architects that comprise my ancestry.  It raises and lowers so I can work sitting or standing.  I may have to put it to good use while writing a book, if a 2nd Edition Book is approved by Elsevier.  That is gonna be a real commitment of time and effort.  When not writing, I am hoping I can use it for guitar playing/ship building (and an occasional attempt at painting).  I have talented painters in my family who are inspirational, but I don't seem to have inherited those particular genes....not that I let that stop me =]

16 minutes ago, Peanut6 said:

Dude Ya' nailed it    IMHO I can't see how it could have turned out any better  

 

Now what thoughts do you have for how you plan on using that drafting table?

Thanks Kev!  You’re too kind!!  The drafting table will be used as an office desk and a construction space/painting easel.  It’s big!  

Looking good and record speed too!

Wow Ron, all your work is eye candy.  *Fantastic* job on the build and rigging, and the flags, sails, and figures are awesome!!!  I love that you have a whole story for each of the figures/characters.  No wonder you like diorama displays!  

5 hours ago, AJohnson said:

Look very good Brian, looks a nice finish to me! 👍

Thanks Andrew!  I'm trying my best!!