md1400cs

Hi Mates, Patrick: thanks so kind - especially from such a perfectionist such as yourself . Yes, it was time for a new profile photo. Minor lateral update. Re-did the hold ballast rocks. Don't know what I was thinking before. These may be a bit too big as well, but certainly more to scale. Satisfied with this bit. Now waiting for the lights and will start the next floor. I intend on using pear wood that I received from Cornwall Model Boats (PS: great vender) as many of you already know. Here are a couple of updated shots. Cheers,

Nigel, As always thanks so much for your continued advice. Yes voltage is an aspect that I am just learning about. This vender, it appears, has incorporated voltage choices for the consumer. Here is a link to the available pre-volted purchase choices. Easy for novices such as I. https://www.modeltrainsoftware.com/smd-chip-leds.html Do appreciate the advice, PS: Glad that you are back active in your yard! Cheers,

E.J: thanks for you thoughts as well. Yes you are also correct flickering is indeed the correct style of lights to include. That said, in this case they won’t work for this cross-section. The available flickering added tech, at the base of the LED, along with the bulky shrink-wrap make them too large and bulky for this particular very visible application. Intended locations for both gun decks are here – both sides So ordered these super tiny Pico in yellow. Captain Steve: I sure like your idea of using paint brush sleeves –Thanks for the tip. Ordered some tubing from Amazon 1.5mm id - 3mm od. I will play around and make lanterns that look something like this one (From AMC “The Terror” series). Again mates thanks for you advice and suggestions. Regards,

Mark: Thanks I have indeed tried looking through all of those vender's sites. No luck beyond stern lamps Michiel: Thanks as well. Yes indeed 3D printing will become a very big part of ship modeling. The improvements are spectacular. I have seen stern ship sections that were rendered using 3D printing. Regarding my small needs, apart from creating a 3d file that is beyond my skills, I will try to fashion these lanterns as you did. I already have some ideas in mind. Waiting for the lights to arrive first. Thanks mates for your advice.... Regards,

Martyn, Yes copper tape is also a good solution. In my case were I to completely plank all the decks I would also prefer tape. I might be trying to do a bit too much with this current build. Michiel sent me this link a bit closer for you - They ave a lot of choices for LED lights http://www.expressmodels.co.uk/acatalog/WHITE_LEDs.html

Hi Mates, Martyn: Nice idea indeed. Oops – I have fallen behind on your log – need to fix that Captain Steve: Thanks as well – lot’s of excellent work. Plastic sleeve is a clever idea!! Nigel: great idea – my skills make me a bit unsure of this very clever solution. ========================== The lighting subject is interesting as well as a new to be learned skill. Appreciate all the advice that you are all posting. PLAN: the hold, and storage decks one will hang from above (center). In the two gun decks I will attach two to each wall per side. So will need 10 lights in all. Will need to make some sort of housings as well. First decision is what types to purchase. • Some have shrunk wrap connectors. •Some are rectangular but also have bulky (for my purposes) wires. • Colors warm white or yellow? • Flickering (random) or steady light? If I were adding these to within the hull it would not be such a dilemma. For this cross section all the lights themselves will be visible. So wiring with shrink wrap could be an issue • The Nano or pico might be the best. I spoke with a very nice person at Model Train Software. He also said that I could purchase soft white and then purchase yellow Galley Glass paint. A product used by stain glass hobbyists. I could apply as many coats of this translucent paint as needed to create the yellowish lighting that I specifically wanted. I think that I will go with the Nano or Pico style of LED – those will allow for the stealthiest wiring installation. Also leaning towards flickering yellow to avoid experimenting with yellow paints. Will also purchase the 3V outputs attaching all the lights to that very smart button battery housing that also has an on and off switch. The lights are already at 3V set-ups. =========================== After receiving the lights I will think of how to make the housings. Here are various photos from Model Train Software. AND The last photo might be great for some ships as stern lanterns

Thanks for the help mates. Denis I ordered model railroad stones from Amazon, Also Home Depot had some pea stones you posted about. Looked great. If these Amazon rocks don't work I'll go over to Home Depot. Regarding the just above pics. Michiel MADE those light covers Brilliant work indeed. Got me thinking haha...... PS: Here is the Amazon link if any of you get into this dilemma. And as Denis said. a hammer would help to make the rocks smaller. this bit of detailing will indeed take a bit of time one rock at a time. https://www.amazon.com/gp/product/B0725P7FT6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 Removed those other fish tank shiny rocks - just not ok....

I may just play round and try Again Thanks indeed.

Michiel, Brilliant work indeed. Hmmm my skills are not there. Thanks for your kind responses. Cheers,

Martyn: Thanks indeed. And yes this build would be perfect for lighting. I intend to go up that ladder and try to increase my skills. That occurred to me this morning, and then I read your post – cheers…. I have found a great source for the lights (This seller has been discussed here) Thk. you MSW members. https://www.modeltrainsoftware.com/flickering-led.html Not sure if I go for soft white, yellow, or flickering, also not sure about the sizes – yet. Mark and Denis; Thanks for the nice comments. Yes those rocks sort of annoy me. And I was going to add a dull clear coat as well. Plan B- I think that I will pull them all off – and start again. I found some at Amazon intended for train hobbyists. These might have been for fish tanks - saw the bag in a nursery. Lastly I need to find some kind of great LED light covers. From Michiel’s great build from 2013 HIS log photos below from LED lights below decks

Thank you Michiel, I was not clear - I have a sources for the lights. You last link also look perfect. I was asking about the covers around the lights (;-) that you used. Those are so perfect. Regards,

Michiel. Hello - I plan to add lights to my current build (first time for this). Saw the great work that you have done in this old posting. I now need to look for the light covers like the ones from your post. If you read this would you remember where you got these? I have looked online but can't seem to find anything at all. Thanks in advance.

Small update, Added the hold bits. Not sure if the rocks are properly scaled, could be too big. Kit included rocks IMHO were generally too large. That said an area in which I have no knowledge - looked at other builds and these seemed to be better. Barrels will be added to next floor up. Working out some details - need to add the bits without covering too much.

Hi Mates, Started work on the first of the floors. Once the smaller filler wood frames are installed I will have a better idea on where to omit floor planks, not to hide so much hold details PS: Will not install framing until rocks, barrels and such have been put into place into the hold area. Regards,

VERY nice additional detail work

Thanks EJ. We all learn from each other - don't we !

E.J. Nice detail work - What is the name of that tool that you are using. I feel the need to get one as well

Denis, thanks, and yes I am looking at admiralty build for ideas, thanks for the advice. Some great builds there for sure. Mates thanks for all the likes as well - much appreciated as always. Cheers,

Excellent continuing work - especially given the amount of tiny details this replica needs. Regards,

Hi mates, federicoaa welcome aboard. Happy that you want to borrow some of my ideas, thanks indeed. Have been away from the shipyard - returned a few days ago. Started the lower outer hull planking. Denis, that pen (from your log) is perfect for the caulking lines!! Here are a few pics. Waiting for some ordered bits including barrels. I would like to actually make some realistic looking ones, but beyond my skill set. Started thinking about how to fabricate the floor just above the hold (sure that it has a specific name haha). Here are a few updated shots. Cheers,

Denis, Yes - those stairs of yours are really excellent. Well done!

E.J Regarding the gold paint. Have of thought of instead using gold foil? This is available at Blick's Art supplies.

Denis, Just catching up - been away - Looking great Your spiral stairs are excellent As Chris and OC just said I agree

Just catching up - V. nice indeed.