AON

Fantastic assortment of sizes

Kurt

I do exactly the same thing.

I put put mine in the bedroom clothes closet... top shelf.  May be you should start looking on your top shelf. 😉

Alan

This might help with laying out your scarph joints.

The Elements of Wood Ship Construction - Scarph Joints - W.H. Curtis (1919).pdf

It likely seems dumb but I would like to know how you have refined the process if you could explain😎

Beautiful job on the pair of block and tackle!  ☺

Druxey

these are the wee bits I watch for and have a special place they are saved in.

Thanks for sharing!

Alan

Nicely done!  

So I had the boss look at it with me.

She says it is blue lettering on a light blue background but noticed one upper part of the bend on the right is pure white background.

I asked if the light blue could be the ribbon in the shadow of the transom.

She didn't think so but then how do you explain the splash of white?

She does not see the gold trim whereas I still do.

I am looking at the image posted above and I see blue letters on a white background with gold trim... but my left eye is not all it should be and my right eye compensates so possibly the white is a pale blue?  In my opinion the pale blue seems an odd background if the lettering was meant to be clear from a distance, but I am no expert.

I should ask my wife.   😉

Blue letters on white ribbon.

Ribbon has gold trim.

This combination looks very very good!

The carver's wife must have picked them out.

It is quite a chunk of money!

Too bad we didn't know about it back when they were offering photocopies.

I suppose a reminder in outlook on your computer might work (if you still have the same computer by then).

On 03/11/2017 at 7:56 PM, Mark P said:

 

A further item of interest,  and apparently a very rare survivor,  is ADT0253,  a rigging warrant for HMS Monarch,  1765.  This lists every conceivable piece of rope for the whole ship:  its diameter,  length,  and associated block type and size.  It was used for the issue of rigging stores from the dockyard,  when the rigging of the ship was set up after launching.  I don't remember ever seeing this referred to in any book,  rather strangely,  as it is very important for anyone rigging a 74.

Good morning Mark,

I followed up on the above post of yours.  It took quite a while to get all the information which condenses to the following:

The document is 6 pages, 10" x 16", at 70 pounds sterling each plus VAT (tax) and shipping. They only offer photos at this time due to the age and condition of them. Photocopying might cause more damage .... however they are digitizing the documents and digital copies may be available in a year or so at reduced pricing.

had to look twice when I saw the moose!

hope to see more - 

espero ver mas

On 18/03/2018 at 9:43 AM, dvm27 said:

Alan, from Figureheads of the Royal Navy, by David Pulvertaft. "Her figurehead was described as the naked figure of the young Greek hero, Bellerophon, riding bareback on the rearing winged horse, Pegasus, wearing a golden helmet with white plumes and a short red cloak flying back from his shoulders." (Citation Edward Fraser, Bellerophon, The Bravest of the Brave,  Wells Gardner, Darton and Co, 1909).

Greg,

I ordered the book after reading your post copied above. It came in today.  Not only do I have the quote in the original print now, it is accompanied by a photo of the figurehead of the Boyne with William III on horseback.  A great reference.  And then to add to this, I now know the original carver's name (pg. 21) of this original figurehead of HMS Bellerophon as described above.

Thank you!

Alan

Thank you for the suggestion Carl.

I searched on the internet and found a few good examples but after having simply shorten them up I believe they do not look so bad... definitely not as majestic as they could have been but it would have been too ornamental and costly for a mere 74 gun ship of the line .

Below are the last of these photos.  I shortened the wings, changed the cape, and straightened out his back a bit as with all the handling it was beginning to go into a landing stance .  The front and hind legs seem a bit thick but I cannot go much thinner on this clay model.  I haven't the skill

Later this week I will pick up some squares of Linden (local boxwood) for carving and when I feel the need for a change I will start hacking away to get some 3X enlarged practice sample pieces.  Until then I need to get back to making frames.

Worked on it a bit more today and I have all the features on.

I am not happy with the cape and I can hear one special someone whispering the wings are much to large and would break off with the first wave impact.... but I wanted to see what it would look like.

So tomorrow I will work on the cape and cut the wings down to half size with no fold (simplified).2018-03-24 15.25.08.mp4

Had my eye injection yesterday.  At 10 week intervals now from 4 weeks.  Hope to progress to 12 weeks and eventually be healed but that could be 5 to 8 years I am told.  So yesterday was an painful day.  Today I can see without tearing up or having a massive head/eye ache but I must stay out of dusty environments for 3 days so no shop time for me.

So I worked on my Marquette sculpture.  Very first attempt.  I must say this is fun.  Looked through the house for an old wire cloths hanger but everything is plastic!  So I used 12 gauge copper wire for the internal support.  It seems to be holding up okay.

I have to work on the mane, tail, wings, and Bellerophon's head and cloak.  That will be tomorrow and Sunday if necessary.

Sorry, I was unclear.

I did not understand the last sentence: "This also works quite well for bleeding - five minutes of direct pressure by the clock."

TMI?

I did not understand it.

Carl

Sorry to confuse you, think of what I was going through!

Thank you for the link. It was very informative.

Mine will be a pole for now.  Eventually it will have a sharp head attached, but it will about 15 feet long only because everything is larger than life when part of a figurehead.

Is it a javelin or spear.

One thing I know it is not a pike or lance

.Alan

so size does matter?  

Many images of the "stick" show it with a head, whereas others do not.

According to the story the lead head melted off when the beast breathed fire at it.  The melted lead flowed into it's mouth and killed it.

So at the beginning of the fight it was a spear and at the end it was a javelin?  

Is this not a Toe-may-toe Toe-mah-toe type thing?  

No I have not seen this.

Thank you very much.

Sorry about that Druxey.

I've been e-mailing and texting and tweeting all day and I got mixed up.