USCG Pequot (WARC-58) by captainbob - FINISHED - 1:96

[captainbob]

Ken, Popeye and Carl,  Thanks for the comments.  As I said before, it's the details that give a model a wow factor.  The more the better.

 

Bob

[Gerhardvienna]

............... it's the details that give a model a wow factor.  The more the better.

 

Bob

 

 

Absolutley correct! there can not be too much details.

 

Regards

Gerhard

[captainbob]

Lawrence, Before you buy all those parts, you need to try and make them. I've seen your work, you can do it.  Look at what some of the other members do.  Nils for one, may have more experience (I don't know) but I believe he said his only power tool is a drill press.  There are parts of the Pequot that I have put off building, thinking 'how in the hell do I do that part'.  Then I'll see something on MSW that clicks and I'll build it.  It may not be the best part, and I may throw the first few away, but now I know I can do it.  So try.  Knowing you did it yourself is what scratch building is all about.

 

Bob

[captainbob]

Your right Lawrence, I’m lax in my entries.  I’m envious of those modelers who seem to have the camera in their hands at all times.  When I’m building I don’t even think about pictures until afterwards then it’s like, ‘I should have taken pictures’.  But then of course it’s too late.   Anyway I’ve been making some of the parts for the foredeck.  It will be crowded by the time I’m through.  The part are only set in place but here is where I am now.

 

Bob

 

 

Edited August 3, 2016 by Cap'n'Bob

[Mirabell61]

Good work Bob,

 

the fitting out with deck equipment and machinery looks very nice...

 

Nils

[Omega1234]

Hi Bob

 

We may not be able to see photos of how you make the individual parts of your boats, but we certainly get to enjoy the final results each time you post an update.

 

The forepeak with all of her machinery is looking really nice.  Well done!

 

Cheers

 

Patrick

[popeye the sailor]

adding to the awesome Bob?    looking sweet!

[Mahuna]

Very nice, Bob

[captainbob]

Patrick, Popeye, Nils and Frank,  Thanks you all for the encouraging words. 

 

Bob

[captainbob]

It’s time to start some rigging.  The mast is a brass tube with a wooden tapered piece on top.  The boom mount is plastic as are the nav. light mounts.  The nav. lights are brass tubing with clear tubbing inside and a colored stick inside that to show red or white. The foredeck parts are in place so I could mount the boom crutch and measure for the boom.  The Pequot website gave good plans for the ship as made but the modifications after she was transferred to the Coast Guard were never documented.  So when it comes to details most of it has to come from the pictures.

 

I just noticed, looking at the pictures, that although the drawings show portholes (lights) in the hull they do not show in any of the pictures.  Now I have to go back and fill them and repaint the hull. Ah well.

 

Bob

 

 

 

 

[Mirabell61]

Nice progress Bob,

 

also mast, loadboom and lanterns well done.....

 

do you have rudder and props already ?

 

Nils

[captainbob]

Thanks Nils, I have the blades for the two props cut out but not soldered to the hub.  The props and rudder may be the last things to go onto the ship.

 

Bob

[steamschooner]

Bob, your build is coming along nicely, it's all those little details that bring it to life.

[Omega1234]

Hi Bob

 

She's just simply lovely!

 

...talk about heaps of charm and character.

 

Cheers

 

Patrick

Edited July 19, 2016 by Omega1234

[captainbob]

I agree, Steamschooner. "I's all those little details that bring it to life".  Now, like you, it's time for the ships boats.  Hope I do as good as you.

 

Thanks Patrick, it was, all the  "heaps of charm and character" that made me want to build this boat.

 

Thank you all for the "likes".

 

Bob

[popeye the sailor]

I'm imagining that your going to have back stays......are there any shrouds as well?  well done on the boom and fore deck...masting and lights are neat too

[BenF89]

Bob,

 

Just catching up after some busy time away from MSW - the Pequot looks great! That's a neat trick you learned for the vents- thanks for the tutorial.

 

She certainly has that mid-century feel to her - very classic looking. Can't wait to see the details come together! And, I know what you mean about pictures. I have to discipline myself to take them, else I would get in the groove and skip a whole bunch.

[captainbob]

Thanks Ben, glad to see you're back.

 

Bob

[captainbob]

I decided to take a break from the Pequot itself and build the three ships boats.  There were two launches which may have been alike, but I wanted to make then different, and one dory.  The two launches which are 2.75 inches long will be mounted amidships and the dory is 2.5 inches long and will be at the port stern.    Now it’s back to the Pequot.  There’s still a lot to do on the main deckhouse, rails on the upper deck, and on, and on. 

 

We’ll just have to wait and see what Bob will do next.

 

Bob

 

 

 

 

 

 

[steamschooner]

Bob,Good looking boats, they will look great on your project.

[mtaylor]

Lovely boats, Bob.  I like the fact they're slightly different.

[Omega1234]

Love those boats, Bob!  Really nice.

 

Cheers

 

Patrick

Edited August 4, 2016 by Omega1234

[cog]

Those boats are looking good, Bob, and must be fun to make too.

 

cheers

[Mirabell61]

I decided to take a break from the Pequot itself and build the three ships boats.  There were two launches which may have been alike, but I wanted to make then different, and one dory.  The two launches which are 2.75 inches long will be mounted amidships and the dory is 2.5 inches long and will be at the port stern.    Now it’s back to the Pequot.  There’s still a lot to do on the main deckhouse, rails on the upper deck, and on, and on. 

 

We’ll just have to wait and see what Bob will do next.

 

Bob

 

DSCF0160.JPG

 

DSCF0187.JPG

 

DSCF0191.JPG

 

DSCF0193.JPG

 

DSCF0196.JPG

 

Nice work on the boats job Bob,

 

they certainly will look super on your Pequot.....

 

Nils

[captainbob]

Thank you all for the kind words.  Yes, once I convinced myself that I could make boats that small. they were fun to build.  Now all I have to do is convince myself that I can make the two props at .125" (3mm) diameter.  I think I can, I think I can, I think I can.

 

Bob

[popeye the sailor]

seeing how well you did with the ship's boats,  you should have very little trouble with the props      boats look nicely done.......I like the dory    very well done indeed  

[Omega1234]

Hi Bob

 

I'm just checking in to see if you've had an update on those props, yet? The reason being is that I have to do a couple of props for my Majellan model and I'm keen to copy off what you've done.

 

Cheers

 

Patrick

Edited August 21, 2016 by Omega1234

[captainbob]

Hi Patrick,  I'm not planning on making the props until near the end of the build so they do not get damaged.  But this website shows the way I like to build props of any size.  http://www.rideaunautical.ca/articles.php?article=propeller

 

But for the small props of the ships boats I will cut notches in a flat sheet, to form blades, and twist the blades to shape. They will only be .125 - .156 inches (3 - 4 mm) in diameter.  Hope this helps.

 

Bob

[Omega1234]

Thanks Bob!

[captainbob]

Hi Cap'nBob 

 

 Good luck with your prop building, golly but they sure are little, they will be a challenge in them selves, 

 

Regards   Lawrence

 

Thanks Lawrence, I'll need all the luck I can get.  But if Patrick can do it on Majellan, . . .  Well I hope I can.

 

Bob