HIPEXEC Posted June 29, 2017 Author #331 Posted June 29, 2017 6 hours ago, rony said: is the glou is good? No. Buy a high quality Ph neutral PVA. You can get it on E-bay mtaylor and Elijah 2 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
HIPEXEC Posted June 29, 2017 Author #332 Posted June 29, 2017 I've finished gluing the planks that curve up at butt up to the transom. Getting there. tasmanian, Jack12477, Mahuna and 8 others 11 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
rony Posted June 30, 2017 #333 Posted June 30, 2017 this is good?: https://www.amazon.com/Books-Hand-Neutral-PVA-Adhesive/dp/B0025TZ26Q mtaylor and HIPEXEC 2 Quote
rony Posted June 30, 2017 #334 Posted June 30, 2017 http://www.ebay.com/itm/PH-Neutral-PVA-Adhesive-with-Spout-Water-Soluble-4-oz-by-Book-by-Hand-/232258597710?epid=1100498679&hash=item3613b0f34e:g:r9EAAOSw4A5YuJyC HIPEXEC and mtaylor 2 Quote
HIPEXEC Posted June 30, 2017 Author #335 Posted June 30, 2017 This is good....members helping members mtaylor 1 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
rony Posted June 30, 2017 #336 Posted June 30, 2017 Thank you.See the thread I opened, it's for the model. mtaylor and Elijah 2 Quote
HIPEXEC Posted July 1, 2017 Author #337 Posted July 1, 2017 Six planks to go with maybe a real thin one and some wedges at the stern. It's not half bad even without any sanding and filling. rafine, src, GuntherMT and 7 others 10 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
HIPEXEC Posted July 1, 2017 Author #338 Posted July 1, 2017 I'll be closing down my shipyard tomorrow AM and heading for cooler climates. This "closed" picture is old 'cause I'm too lazy to take a new pic. See you all in 16 days. Mahuna, JesseLee, Sjors and 8 others 11 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
Sjors Posted July 1, 2017 #339 Posted July 1, 2017 Again?? enjoy! Sjors mtaylor, HIPEXEC, Nirvana and 1 other 4 Quote Currend builds: USS Constitution by Sjors - Model Shipways - Scale 1:76 HMS Victory by Sjors - Jotika - Scale 1:72 On hold: VOC Reconnaisance yacht Duyfken by Sjors - Kolderstok - Scale 1:50 Finished builds: HMS Snake (1797) by Sjors - Caldercraft - Scale 1:64 Nuestra Señora del Pilar by Sjors & Anja - OcCre - Scale 1:64 H.M. Brig-Sloop Flirt 1782 by Sjors - Vanguard Models - Scale 1:64 HMS Agamemnon by Sjors - Caldercraft / Jotika - 1:64 San Ildefonso - OcCre Le Mirage - Corel Smit Rotterdam (sea tug) - Billing Boats - 1:75 Sovereign of the seas - De Agostini Spirit of Mississippi - OcCre Santissima Trinidad - OcCre Corsair - OcCre
HIPEXEC Posted July 2, 2017 Author #340 Posted July 2, 2017 20 hours ago, Sjors said: Again?? enjoy! Sjors It is too hot here! 115 degrees F Nirvana, Jack12477 and mtaylor 3 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
Sjors Posted July 2, 2017 #341 Posted July 2, 2017 We have snow.....😇🌨🌨❄️⛄️⛸⛷🏂 Sjors HIPEXEC, Nirvana, Jack12477 and 2 others 5 Quote Currend builds: USS Constitution by Sjors - Model Shipways - Scale 1:76 HMS Victory by Sjors - Jotika - Scale 1:72 On hold: VOC Reconnaisance yacht Duyfken by Sjors - Kolderstok - Scale 1:50 Finished builds: HMS Snake (1797) by Sjors - Caldercraft - Scale 1:64 Nuestra Señora del Pilar by Sjors & Anja - OcCre - Scale 1:64 H.M. Brig-Sloop Flirt 1782 by Sjors - Vanguard Models - Scale 1:64 HMS Agamemnon by Sjors - Caldercraft / Jotika - 1:64 San Ildefonso - OcCre Le Mirage - Corel Smit Rotterdam (sea tug) - Billing Boats - 1:75 Sovereign of the seas - De Agostini Spirit of Mississippi - OcCre Santissima Trinidad - OcCre Corsair - OcCre
Nirvana Posted July 2, 2017 #342 Posted July 2, 2017 Sjors, you went to the alps? Sjors, HIPEXEC, mtaylor and 2 others 5 Quote Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Sjors Posted July 3, 2017 #343 Posted July 3, 2017 Yep Dr. Per 😅 Sjors Elijah 1 Quote Currend builds: USS Constitution by Sjors - Model Shipways - Scale 1:76 HMS Victory by Sjors - Jotika - Scale 1:72 On hold: VOC Reconnaisance yacht Duyfken by Sjors - Kolderstok - Scale 1:50 Finished builds: HMS Snake (1797) by Sjors - Caldercraft - Scale 1:64 Nuestra Señora del Pilar by Sjors & Anja - OcCre - Scale 1:64 H.M. Brig-Sloop Flirt 1782 by Sjors - Vanguard Models - Scale 1:64 HMS Agamemnon by Sjors - Caldercraft / Jotika - 1:64 San Ildefonso - OcCre Le Mirage - Corel Smit Rotterdam (sea tug) - Billing Boats - 1:75 Sovereign of the seas - De Agostini Spirit of Mississippi - OcCre Santissima Trinidad - OcCre Corsair - OcCre
kscadman Posted July 3, 2017 #344 Posted July 3, 2017 Whats the difference between the PVA and the Elmers glue. I've been using Elmers for years and haven't had any troubles with it. Nut I'm always looking for a better way. Richard Quote Current Build - U.S. Syren 2nd Build - HMS Bounty Launch When organizing your thoughts, never use the Dewey Decimal system.
Mahuna Posted July 3, 2017 #345 Posted July 3, 2017 PVA is a type of glue - Elmers is a brand name for their version of PVA glue. Titebond is another brand name. All PVA glues sold as wood glue work well and can be unbounded using hot water or isopropyl alcohol. src, tasmanian and Jack12477 3 Quote Frank Completed: Skipjack Kathryn; Dunbrody Sectional Model; Paragon (modified Mayflower) Scratch Build; Planning a Sectional Model of Dunbrody NRG Member
knightyo Posted July 3, 2017 #346 Posted July 3, 2017 This model is going to be gorgeous when sanded. Quote Alan's POB Build Log HMS Triton 1/64 Alan's POB Build Log USS Syren 1/64 Alan's Build Log Nina 1/106
HIPEXEC Posted July 27, 2017 Author #347 Posted July 27, 2017 Shipyard open! After 27 days, it feels good to glue some planks on. I'm at the part where there a lot of stealers and filler pieces so it's slow going. src, Ryland Craze, Dubz and 6 others 9 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
Sjors Posted July 27, 2017 #348 Posted July 27, 2017 He is back and when you gonna leave again?☺️ Still nice planking. Next time when you come to Holland I'll be sure that i will have a hull without planking! Sjors mtaylor, src and Elijah 3 Quote Currend builds: USS Constitution by Sjors - Model Shipways - Scale 1:76 HMS Victory by Sjors - Jotika - Scale 1:72 On hold: VOC Reconnaisance yacht Duyfken by Sjors - Kolderstok - Scale 1:50 Finished builds: HMS Snake (1797) by Sjors - Caldercraft - Scale 1:64 Nuestra Señora del Pilar by Sjors & Anja - OcCre - Scale 1:64 H.M. Brig-Sloop Flirt 1782 by Sjors - Vanguard Models - Scale 1:64 HMS Agamemnon by Sjors - Caldercraft / Jotika - 1:64 San Ildefonso - OcCre Le Mirage - Corel Smit Rotterdam (sea tug) - Billing Boats - 1:75 Sovereign of the seas - De Agostini Spirit of Mississippi - OcCre Santissima Trinidad - OcCre Corsair - OcCre
HIPEXEC Posted July 28, 2017 Author #349 Posted July 28, 2017 22 hours ago, Sjors said: He is back and when you gonna leave again?☺️ Still nice planking. Next time when you come to Holland I'll be sure that i will have a hull without planking! Sjors Hello Sjors. It was great to see you and Anja. Elijah, Sjors and mtaylor 3 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
HIPEXEC Posted July 28, 2017 Author #350 Posted July 28, 2017 Finished the Larboard side yesterday but our site was down? There's one small strip under the rail, but I'll wait until just before I glue on the cap since the edge is fragile. Now onto the starboard side. mtaylor, Heronguy, tasmanian and 10 others 13 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
Tigersteve Posted July 28, 2017 #351 Posted July 28, 2017 Nice! Steve HIPEXEC, Elijah and mtaylor 3 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
src Posted July 29, 2017 #352 Posted July 29, 2017 On 7/28/2017 at 9:15 AM, HIPEXEC said: Finished the Larboard side yesterday but our site was down? Well done Rich. Yes it appears somebody has been tinkering with the work here at MSW. Sam Elijah, HIPEXEC and mtaylor 3 Quote Current Build Constructo Enterprise
HIPEXEC Posted July 30, 2017 Author #353 Posted July 30, 2017 Getting there on the starboard side. Slow but sure Elijah, Jack12477, robdurant and 4 others 7 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
HIPEXEC Posted July 30, 2017 Author #354 Posted July 30, 2017 Creeping to a close. Each plank here becomes a sculpture that has to be shaped, twisted, bent, tapered, etc. robdurant, rafine, GuntherMT and 6 others 9 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
HIPEXEC Posted July 31, 2017 Author #355 Posted July 31, 2017 There's always a sliver left? src, Elijah, mtaylor and 3 others 6 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
HIPEXEC Posted July 31, 2017 Author #356 Posted July 31, 2017 Sliver's gone! Now I'll sand the hull and micro-fill some very small spaces. Varnish would probably hide them, but I'll make some filler by sanding some left over planks for their sawdust. I know what you're saying..."shoulda' painted the hull like the instructions say." I just happen to like looking at un-painted wood. src, mtaylor, rafine and 10 others 13 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
HIPEXEC Posted August 1, 2017 Author #357 Posted August 1, 2017 I've been sanding the hull since yesterday. First with coarse paper now with fine. I have to be careful since I'm only sanding thin veneer which is very thin. I'm almost where I want the hull to be before a coat of varnish. JesseLee, Elijah, RichieG and 9 others 12 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
Heronguy Posted August 1, 2017 #358 Posted August 1, 2017 That hull looks really good Rich! Elijah and HIPEXEC 2 Quote Doug Current Builds: Bluenose II - AL / Krabbenkutter / Prince de Neufchatel / Essex Cross-section / Syren / Barque Stefano / Winchelsea / Half Hull / Maria HF31 - Dusek / Bandirma - Turkmodel On the Shelf: Santisima Trinidad and Cross Section / HMS Cutter Alert / Tender AVOS / Confederacy Suspended Build: Bluenose II - Billing Boats Nr 600
Nirvana Posted August 2, 2017 #359 Posted August 2, 2017 Rich, Sanding since yesterday?! I am surprised you still have a ship.... HIPEXEC, Heronguy and Elijah 3 Quote Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
HIPEXEC Posted August 2, 2017 Author #360 Posted August 2, 2017 3 hours ago, Nirvana said: Rich, Sanding since yesterday?! I am surprised you still have a ship.... Just a little bit at a time. mtaylor and Elijah 2 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.