woodeater Posted January 16, 2019 #1 Posted January 16, 2019 In the Central Naval Museum (Saint-Petersburg, Russia) there is an Admiralty model of frigate La Legere. During 2 years i was busy with measuring this model and preparing a drawings. Then during 2 years i was busy with her building. I will show you my work in progress... popash42, davyboy, Valeriy V and 14 others 17
woodeater Posted January 17, 2019 Author #2 Posted January 17, 2019 I used apple-wood for frames druxey, Valeriy V, hexnut and 16 others 19
G.L. Posted January 17, 2019 #3 Posted January 17, 2019 Original building board! It looks to me very stable to sand the frames. mtaylor, druxey, Keith Black and 2 others 5 G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
woodeater Posted January 17, 2019 Author #4 Posted January 17, 2019 I like this building board! Much freedom during operating with frames MikeB4, yvesvidal, dvm27 and 13 others 16
druxey Posted January 17, 2019 #5 Posted January 17, 2019 Very nice work so far. mtaylor 1 Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
Katoom Posted January 17, 2019 #6 Posted January 17, 2019 Good luck with the new build and thanks for the many fine photos that you have contributed to the photo galleries. paulsutcliffe and mtaylor 2 Kevin My Introduction
woodeater Posted January 18, 2019 Author #7 Posted January 18, 2019 Stern post and wing transom popash42, Keith Black, GrandpaPhil and 1 other 4
woodeater Posted January 18, 2019 Author #8 Posted January 18, 2019 Hawse pieces and frames mtaylor, popash42, Siggi52 and 12 others 15
vossiewulf Posted January 18, 2019 #9 Posted January 18, 2019 Extremely good work. You make that joinery sequence look easy. mtaylor and Keith Black 2 Building HM Cutter Lady Nelson 1:64
woodeater Posted January 18, 2019 Author #10 Posted January 18, 2019 All frames are at their places paulsutcliffe, davyboy, Michel Bénard and 17 others 20
woodeater Posted January 19, 2019 Author #11 Posted January 19, 2019 Tools Mike Y, KARAVOKIRIS, dvm27 and 14 others 17
G.L. Posted January 19, 2019 #12 Posted January 19, 2019 That is what I call craftsmanship. Keith Black and mtaylor 2 G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
woodeater Posted January 19, 2019 Author #13 Posted January 19, 2019 First competition MikeB4, Mike Y, albert and 12 others 15
KORTES Posted January 19, 2019 #14 Posted January 19, 2019 (edited) This is the famous work of the Master, whose models many have been learning from. My best regards. Edited January 19, 2019 by KORTES
woodeater Posted January 19, 2019 Author #15 Posted January 19, 2019 Next part of work GrandpaPhil, Richard Griffith, Keith Black and 10 others 13
woodeater Posted January 20, 2019 Author #16 Posted January 20, 2019 Breast hooks G.L., popash42, Valeriy V and 8 others 10 1
woodeater Posted January 21, 2019 Author #17 Posted January 21, 2019 Hold Katoom, Captain Poison, Keith Black and 14 others 17
woodeater Posted January 21, 2019 Author #18 Posted January 21, 2019 Beams of lower deck are all ready oneslim, Captain Poison, paulsutcliffe and 15 others 18
woodeater Posted January 23, 2019 Author #19 Posted January 23, 2019 Two lower deck planks fixed JOUFF, popash42, vossiewulf and 11 others 14
woodeater Posted January 23, 2019 Author #21 Posted January 23, 2019 Thank you, albert! albert, Valeriy V, GrandpaPhil and 7 others 10
woodeater Posted January 23, 2019 Author #22 Posted January 23, 2019 Fixing bitts albert, mtaylor, JOUFF and 8 others 11
woodeater Posted January 23, 2019 Author #23 Posted January 23, 2019 he first beams of main deck GrandpaPhil, davyboy, popash42 and 7 others 10
woodeater Posted January 23, 2019 Author #24 Posted January 23, 2019 Diagonal knees vossiewulf, JOUFF, Keith Black and 7 others 10
woodeater Posted January 23, 2019 Author #25 Posted January 23, 2019 Bitts are ready and fixed mtaylor, oneslim, Valeriy V and 7 others 10
woodeater Posted January 23, 2019 Author #26 Posted January 23, 2019 These bitts are made from Cumier-wood JOUFF, albert, Valeriy V and 10 others 13
vossiewulf Posted January 24, 2019 #27 Posted January 24, 2019 Like Amalio, Woodeater has at least 8 arms. mtaylor and John Allen 2 Building HM Cutter Lady Nelson 1:64
woodeater Posted January 24, 2019 Author #28 Posted January 24, 2019 Amalio? JOUFF, archjofo, popash42 and 6 others 9
vossiewulf Posted January 24, 2019 #29 Posted January 24, 2019 Amalio mtaylor 1 Building HM Cutter Lady Nelson 1:64
woodeater Posted January 24, 2019 Author #30 Posted January 24, 2019 paulsutcliffe, GrandpaPhil, KeithAug and 6 others 9
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now