Jump to content

HMS Winchelsea 1764 by Wacom - FINISHED - 1:48


Recommended Posts

Hi Erik,

Total cost to date (chapters one through to four) including shipping is $1938.58 nzd.

Keep in mind this has been spread out over nearly a year.  I find Chuck’s shipping prices very reasonable and please remember whatever you buy from Chuck is of the very highest quality and backed up by service second to none.

 

Reg

Link to comment
Share on other sites

Thanks Reg

I will get on and get some more of my Victory done then. need to get a bit further along to warrant the spend to the wallet holder. she wont part with the dollars if i have part finished items laying around. im in the process of re designing my back yard so am looking at building a man cave so i can actually look at builds like this where i need to make stuff

Ships in Drydock for build. De Agostini HMS Victory, BB Dannebrog, Artesania Latina Cutty Sark and Endeavour longboat.

 

Link to comment
Share on other sites

  • 1 month later...

I’m continually impressed whenever I check in on you build Reg. That’s money well spent in your expert hands and you are also answering questions I’ve been wondering about like the fruitwood gel. Eagerly awaiting more.

Link to comment
Share on other sites

  • 4 weeks later...
On 6/25/2020 at 5:14 AM, nzreg said:

Slow progress to date, the port side quarter gallery and frieze installed.

The mouldings are not as per Chuck, the making of the scrapers for them had me beat after many, many attempts so I decided to go with the A.L. scrapers I had

As Mr Sinatra said "I did it my way" whilst trying to keep the ship in the spirit of this fine prototype.

The roof and lady in the corner are only sitting there as are the windows, I consider them too delicate to permanently attach at this stage.

And so onto the starboard side.

IMG_1517.thumb.jpg.cca78bfd10067fe89c0026da958992e0.jpgIMG_1516.thumb.jpg.0990d83eb1b191dbd58918ca1dcb4bf2.jpg

very pretty :) 

Link to comment
Share on other sites

  • 5 months later...

Looking at my last post I see it was on the 21 November 2020, time flys:wacko:

Most of the intervening months were spent remodelling the garden.  What started as a small deck build mushroomed into a total revamp of the outdoor areas.

Build on Winnie has been slow but productive.

I made the decision early on to limit the amount of painting, relying instead on using different timbers to highlight the beauty of Chucks design. Timber varieties would be limited to AYC, Cherry, Boxwood and Kauri.

The photos show how progress has been.

Now its onto the hair brackets.

 

IMG_1772.thumb.jpg.647193aaec930825d8dcf71df882556e.jpg

IMG_1774.thumb.jpg.5417f55fb1b5006f9150edba9a94781c.jpg

IMG_1776.thumb.jpg.8b4562abcd4433b5aae4a11ca8ebe72f.jpg

IMG_1775.thumb.jpg.697b1d0e357d4af995ba60a7511cd7d8.jpg

IMG_1778.thumb.jpg.b6a3d952f0417ae761d6ef0edc5004b7.jpg

IMG_1784.thumb.jpg.6347358d0d28af241e77d3c04845aec9.jpg

 

IMG_1779.jpg

IMG_1786.jpg

Reg

Link to comment
Share on other sites

Thanks Timmo, always good to hear from “them up North”😁

My latest offering are photos of the hair brackets just finished today.

Not as difficult as I thought they may be, Chucks instructions are easy to follow.

Eagerly awaiting the parts for chapter seven.

929B0FFB-0D46-42EC-8544-FF47C57B5CA3.thumb.jpeg.bd0f2269e8095d91a40f75442ec3e1c8.jpeg

97CA45FF-5646-40F2-A6C2-DC734E2BB3F4.thumb.jpeg.669055ff44bf3e9b22754624df46c15b.jpeg

76CF846D-6372-45AF-8811-0A67B6B4A47F.thumb.jpeg.2c12e1b879921fa7df54afaf8af558ea.jpeg

Edited by nzreg

Reg

Link to comment
Share on other sites

  • 4 weeks later...

While waiting for Chapter Seven parts to arrive I took the opportunity to mount the cannon using a method borrowed from C. Nepean Longridge’s book “THE ANATOMY OF NELSONS SHIPS”.
This was achieved  By drilling a .8mm hole through both carriage cheeks , rear axle and deck, then by inserting .8mm brass pins into these holes the carriages are held firmly in place with the advantage that they can be removed should the need arise.
Having purchased the blocks from Chuck some time ago I decided to have a go at rigging the cannon.
First off was to make some rope, 1mm for the breaching and .4mm for stropping plus the purchase for hauling the cannon into the firing position.
Next up a jig was made to strop the single block, form a becket at one end and attach a hook at the other.
The double block was stropped with its hook on the same jig.

IMG_0443.thumb.jpg.8f0e921397c06c59fca7d09fa1b6b690.jpg
I chose to use this configuration after coming across the drawing in Doctor Longridge’s book.
(Mods please delete anything that may violate copy-write)

IMG_1813.thumb.jpg.80dd7f9242866226c49a3b356d070896.jpg

IMG_1816.thumb.jpg.264b6ad335321391e79f71af394f9430.jpg
2DDFA029-FEB1-4C9A-890F-644F18843879.thumb.jpeg.2ef0b68b4c0b52cc336fa15efa078640.jpeg

Edited by nzreg

Reg

Link to comment
Share on other sites

Thanks for the likes and encouraging comments from, Chuck, Bob, Fred and “Polly”.

 Bob your build was the inspiration in my deciding to rig the cannon👍 Fred, by my reckoning around two hours to rig each gun including making all the sub assemblies and rope, of course if your fingers dont twitch around like mine it could be done quicker🤔

Reg

Link to comment
Share on other sites

Very nice workmanship Reg!

Rusty

"So Long For Now" B) 

 

Current Builds: Speedwell

 

 

Completed Build Logs:  HMS Winchelsea 1/48   Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

  • 5 weeks later...
9 hours ago, jfhealey said:

Lovely work rigging the guns. I've ordered rigging rope from Syren today so I hope to make a start soon. I prefer the way you've hung the tackles ropes from hooks on the bulwarks rather than coiling it on the deck (that looks a bit Sunday best to my eyes - not that I know anything about it). 

Thanks for the comments, I found (with jittery fingers, poor eyesight etc etc etc) that this part of the build probably took longer than it should.  The “ping factor” being very high🥴🤔

I have seen photos which showed the opes hanging on wooden cleats but found these jut too fiddly to make.

Reg

Link to comment
Share on other sites

  • 2 months later...
Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...