Bitao Posted March 11, 2020 Author #31 Posted March 11, 2020 Let's get on with it. Thank you for your guidance Siggi52, cog, JpR62 and 14 others 17 Quote
wefalck Posted March 11, 2020 #32 Posted March 11, 2020 (edited) I think it would be very interesting for the tool-junkies among us to have a presentation of your workshop - see the thread 'Where do you do your's then ... ". Do you do a sping-cleaning every time you take pictures ? I don't see any saw-dust whatsover 😯 Very crisp work on the patent spill and the pump indeed. Just to pick a bit at it (apologies): it shouldn't actully be spur wheels with straight teeth (see image below), but rather a 'ratched' wheels ... Edited March 11, 2020 by wefalck DmitriyMarkov, shipcarpenter, KORTES and 4 others 7 Quote wefalck panta rhei - Everything is in flux
bricklayer Posted March 11, 2020 #33 Posted March 11, 2020 Eberhard I think that hyw - unfortunately he didn`t tell us his name - built the winch strictly according to the drawing released by ANCRE. So there`s got to be a different way to lock the gears to prevent the winch from spinning reverse. A gear that`s shaped like a circular saw blade with a pawl, that engages at the steep side of rhe teeth, is self-locking indeed. But I think that self-locking of the winch on this particular ship is obtained in a different way. Moving the long two-sided lever seems to spin the winch. Perhaps friction prevents it from spinning reverse. E.g. you turn a rotary table by turning it`s worm gear. But you can`t turn the worm gear by turning the table. It`s self-locking without a pawl to be engaged. Michael Marvellous work on Gemma. druxey 1 Quote
wefalck Posted March 11, 2020 #34 Posted March 11, 2020 Michael, all the wheels are ratched wheels in fact. There are a couple of pawls inside the levers that are made from two hollow castings and that are retained by a groove turned on each face of the wheels. There is somewhere a drawing of this Armstrong patent windlass on the Web. The GEMMA drawings don't seem to be quite correct in this respect. Quote wefalck panta rhei - Everything is in flux
Bitao Posted March 13, 2020 Author #35 Posted March 13, 2020 On 3/11/2020 at 6:47 PM, wefalck said: I think it would be very interesting for the tool-junkies among us to have a presentation of your workshop - see the thread 'Where do you do your's then ... ". Do you do a sping-cleaning every time you take pictures ? I don't see any saw-dust whatsover 😯 Very crisp work on the patent spill and the pump indeed. Just to pick a bit at it (apologies): it shouldn't actully be spur wheels with straight teeth (see image below), but rather a 'ratched' wheels ... Thank you for pointing that out. I did misinterpret. When this piece is finished, I will post a separate post showing the tools I created and designed. Keeping the work environment clean is a good habit, and the chip in the process also has a great impact on accuracy, so I use two high-performance vacuum cleaner to clean garbage. EricWilliamMarshall, druxey, mtaylor and 1 other 4 Quote
Bitao Posted March 13, 2020 Author #36 Posted March 13, 2020 On 3/12/2020 at 6:03 AM, bricklayer said: Eberhard I think that hyw - unfortunately he didn`t tell us his name - built the winch strictly according to the drawing released by ANCRE. So there`s got to be a different way to lock the gears to prevent the winch from spinning reverse. A gear that`s shaped like a circular saw blade with a pawl, that engages at the steep side of rhe teeth, is self-locking indeed. But I think that self-locking of the winch on this particular ship is obtained in a different way. Moving the long two-sided lever seems to spin the winch. Perhaps friction prevents it from spinning reverse. E.g. you turn a rotary table by turning it`s worm gear. But you can`t turn the worm gear by turning the table. It`s self-locking without a pawl to be engaged. Michael Marvellous work on Gemma. Although I made the locking mechanism according to the drawings, I did misinterpret the shape of the gears. mtaylor, DmitriyMarkov, druxey and 1 other 4 Quote
Bitao Posted March 15, 2020 Author #37 Posted March 15, 2020 GrandpaPhil, G.L., tlevine and 20 others 23 Quote
wefalck Posted March 15, 2020 #38 Posted March 15, 2020 Brilliant ! paulsutcliffe and mtaylor 2 Quote wefalck panta rhei - Everything is in flux
Tony Hunt Posted March 15, 2020 #39 Posted March 15, 2020 Oh my gosh. Jewelry! mtaylor and paulsutcliffe 2 Quote
G.L. Posted March 15, 2020 #40 Posted March 15, 2020 It is indeed brilliant jewelry work. Do you have pictures of the making process as well? mtaylor 1 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
wefalck Posted March 15, 2020 #41 Posted March 15, 2020 44 minutes ago, Tony Hunt said: Oh my gosh. Jewelry! I hope my wife doesn't see this ! She keeps telling me, that I should apply my tools to something more useful, such as jewellry-making 😱 mtaylor, Tony Hunt, druxey and 1 other 4 Quote wefalck panta rhei - Everything is in flux
Voyageur Posted March 15, 2020 #42 Posted March 15, 2020 If this is an advertisement for awesome clamps and tools, count me in! I want them al!! JpR62, EricWilliamMarshall, paulsutcliffe and 2 others 5 Quote We are what we repeatedly do. Excellence, therefore is a habit, not an act. ~ Aristotle I could carry, paddle, walk and sing with any man I ever saw. I have been twenty-four years a canoe man, and forty-one years in service; no portage was ever too long for me, fifty songs could I sing. I have saved the lives of ten voyageurs, have had twelve wives and six running dogs. I spent all of my money in pleasure. Were I young again, I would spend my life the same way over. There is no life so happy as a voyageur's life! ~ The Voyageur, Grace Lee Nute
BANYAN Posted March 15, 2020 #43 Posted March 15, 2020 Stunning work! Did you make those thimbles, clew hooks etc yourself? If you did, could you please show us how you did it? cheers Pat paulsutcliffe and mtaylor 2 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)
Bitao Posted March 16, 2020 Author #44 Posted March 16, 2020 12 hours ago, Voyageur said: If this is an advertisement for awesome clamps and tools, count me in! I want them al!! Thank you for your attention. Since I have to focus on my model project, these tools are just a hobby, and processing them takes up a lot of my time, so I'm sorry not to sell them. mtaylor, druxey and EricWilliamMarshall 3 Quote
Bitao Posted March 16, 2020 Author #45 Posted March 16, 2020 3 hours ago, BANYAN said: Stunning work! Did you make those thimbles, clew hooks etc yourself? If you did, could you please show us how you did it? cheers Pat Thank you for your attention. Many of the unpublished tools in this image were created by me. I mainly use the lathe processing, milling processing way production. I also like to make any part of my model in these ways; after this piece is finished, I'll post another post about my various diy tools. Have a nice life! druxey, EricWilliamMarshall, mtaylor and 1 other 4 Quote
Bitao Posted March 16, 2020 Author #46 Posted March 16, 2020 Tony Hunt, Siggi52, ccoyle and 17 others 20 Quote
wefalck Posted March 16, 2020 #47 Posted March 16, 2020 I think we all would love to see photos of the processes, the stages of fabrication, and not only the brilliant products ... paulsutcliffe, mtaylor and druxey 3 Quote wefalck panta rhei - Everything is in flux
Bitao Posted March 16, 2020 Author #48 Posted March 16, 2020 1 hour ago, wefalck said: I think we all would love to see photos of the processes, the stages of fabrication, and not only the brilliant products ... I'm sorry I didn't live up to your expectations. Almost all of my work, especially when I'm working on a machine, I never take pictures that aren't relevant, just to be safe and to make sure there are no mistakes. DmitriyMarkov, druxey, EricWilliamMarshall and 3 others 6 Quote
BANYAN Posted March 17, 2020 #49 Posted March 17, 2020 Thanks for the explanation; they are among the best fittings I have seen made - you truly have a remarkable talent. Thanks for sharing Pat druxey and mtaylor 2 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)
Bitao Posted March 17, 2020 Author #50 Posted March 17, 2020 5 hours ago, BANYAN said: Thanks for the explanation; they are among the best fittings I have seen made - you truly have a remarkable talent. Thanks for sharing Pat Thank you for your comments. I came to this world-class Forum through the introduction of friends, very like the atmosphere and environment here, hope to learn a lot of master works can improve their level, do my best to do each work. druxey, paulsutcliffe, mtaylor and 1 other 4 Quote
JeffT Posted March 17, 2020 #51 Posted March 17, 2020 Very nice metal work! paulsutcliffe and mtaylor 2 Quote Jeff In progress: Medway Longboat 1742 - Syren Ship Model Company -1/2" scale USS Constitution - Model Shipways - Scale 1:76 HMS Granado - CAF Model - 1:48 HMS Sphinx - Vanguard
druxey Posted March 17, 2020 #52 Posted March 17, 2020 Brilliant model engineering, hyw! paulsutcliffe and mtaylor 2 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
Bitao Posted March 18, 2020 Author #53 Posted March 18, 2020 tlevine, mtaylor, G.L. and 17 others 20 Quote
Vladimir_Wairoa Posted March 18, 2020 #54 Posted March 18, 2020 Hello, this is just wow . ! mtaylor and druxey 2 Quote
Tony Hunt Posted March 19, 2020 #55 Posted March 19, 2020 I don't think pressing the "like" button really does this justice. mtaylor 1 Quote
Bitao Posted March 21, 2020 Author #56 Posted March 21, 2020 (edited) Edited March 21, 2020 by hyw yvesvidal, Tony Hunt, Siggi52 and 11 others 14 Quote
G.L. Posted March 21, 2020 #57 Posted March 21, 2020 That's really serial work. Very neat solder work! mtaylor 1 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
BobG Posted March 23, 2020 #58 Posted March 23, 2020 Oh my God....does it get any better than this?!!! Astonishingly masterful work! mtaylor 1 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild
Bitao Posted March 24, 2020 Author #59 Posted March 24, 2020 oneslim, FriedClams, yamsterman and 19 others 22 Quote
KORTES Posted March 24, 2020 #60 Posted March 24, 2020 This is an outstanding masterpiece of mastery level and the culture of work. My best regards. paulsutcliffe, BobG and cog 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.