Schrader Posted August 19, 2020 Author Share #61 Posted August 19, 2020 Thanks Lou I agree completely. A couple of fitting elements and I think I am ready To start with the external hull. This is going to give a total different external look let’s see BobG and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
BANYAN Posted August 19, 2020 Share #62 Posted August 19, 2020 I have to agree with Steven; very nice work on putting the planking together. cheers Pat mtaylor 1 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64) Link to comment Share on other sites More sharing options...
mtaylor Posted August 20, 2020 Share #63 Posted August 20, 2020 Super nice work, Hellmuht. This is something totally eye catching. BobG 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Sceatha Posted August 25, 2020 Share #64 Posted August 25, 2020 This is going great Hellmuth! As you know, I have spent some time studying this ship, and I think your model is going to be the definitive depiction of this one. Any museum would be glad to have this! Looking forward to seeing the outer planking. George mtaylor 1 Quote Current build: Greek Galliot (scratchbuilt) Previous: Byblos Ship (scratchbuilt) Keep building. https://www.scalemodelspot.com/ Link to comment Share on other sites More sharing options...
Schrader Posted August 30, 2020 Author Share #65 Posted August 30, 2020 George!!!! Thanks a lot for your kind words..... Let’s see the progresses ...... First, I spent some time studying how the “stays” are going to be fixed in the hull......in some of the pictures and documents i found something like this.... So not having something else ..... I decided to “install” a couple of these artifacts.... And now... it is time to start with the external hull.... Let’s see some pictures of the interior.... Thanks for all those “likes” and kind words BLACK VIKING, Binho, Landrotten Highlander and 13 others 16 Quote Link to comment Share on other sites More sharing options...
Louie da fly Posted August 31, 2020 Share #66 Posted August 31, 2020 Fantastic work, Hellmuht! I've been waiting to see the outside planking completed, and it's even better than I'd hoped.You've really pulled it off perfectly. It does look like the lashings got through the planks as in the original. My hat's off to you for doing all that work to make it right. BobG, Jeronimo and mtaylor 3 Quote It's not really a ship model unless you've bled on it. CURRENT BUILDS Golden City - Ballarat paddlewheeler La Lomellina - Theoretical Reconstruction of a Genoese carrack sunk in 1516 FINISHED Venetian merchant Ship from Basilica of San Marco Australian couta boat RMS Titanic HMVS Cerberus 11th century Byzantine dromon Winchelsea Nef - Late 13th century Mediaeval ship Henry Grace a Dieu - Rebuild of 1:200 model I started in 1967 Mistydeefer - restoration of decor model yacht Link to comment Share on other sites More sharing options...
Schrader Posted August 31, 2020 Author Share #67 Posted August 31, 2020 I really don’t know if I deserve all your kind words. Thanks a lot Louie da fly and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
Schrader Posted September 2, 2020 Author Share #68 Posted September 2, 2020 I just re assembled all the pieces.... “provisional”. Once i finished the hull.... this is how it looks like..... and I feel really happy with..... IMG_0153.mp4 druxey, BANYAN, bigpetr and 8 others 11 Quote Link to comment Share on other sites More sharing options...
Schrader Posted September 7, 2020 Author Share #69 Posted September 7, 2020 This weekend we were working in finishing the hull sewing..... IMG_0159.mp4 Jeronimo, mtaylor, Louie da fly and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Schrader Posted September 7, 2020 Author Share #70 Posted September 7, 2020 Also.... we finished the decks..... Take a look of this video IMG_0160.mp4 Jeronimo, bigpetr, druxey and 10 others 13 Quote Link to comment Share on other sites More sharing options...
PhilB Posted September 7, 2020 Share #71 Posted September 7, 2020 A brilliant project! So much fine detail. The hull sewing is simply amazing. The mast details are stunning too. Louie da fly, Jeronimo, mtaylor and 1 other 4 Quote Link to comment Share on other sites More sharing options...
BANYAN Posted September 8, 2020 Share #72 Posted September 8, 2020 She's looking great Hellmuht; a very nice job you have done on the stitching. Must have taken some time to work out the repeating pattern to achieve the look? cheers Pat mtaylor 1 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64) Link to comment Share on other sites More sharing options...
bigpetr Posted September 8, 2020 Share #73 Posted September 8, 2020 She is lovely. Great workmanship. mtaylor, BobG and Louie da fly 3 Quote Link to comment Share on other sites More sharing options...
Schrader Posted September 9, 2020 Author Share #74 Posted September 9, 2020 Thanks to you all yes!!!! A lot of time bit it worth it Louie da fly and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
mtaylor Posted September 9, 2020 Share #75 Posted September 9, 2020 I've been flowing this and the research and work are excellent. Is there still more do because I'm looking forward to it. Louie da fly 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Louie da fly Posted September 10, 2020 Share #76 Posted September 10, 2020 Magnificent work, Hellmuht! That's a wonderful model. mtaylor 1 Quote It's not really a ship model unless you've bled on it. CURRENT BUILDS Golden City - Ballarat paddlewheeler La Lomellina - Theoretical Reconstruction of a Genoese carrack sunk in 1516 FINISHED Venetian merchant Ship from Basilica of San Marco Australian couta boat RMS Titanic HMVS Cerberus 11th century Byzantine dromon Winchelsea Nef - Late 13th century Mediaeval ship Henry Grace a Dieu - Rebuild of 1:200 model I started in 1967 Mistydeefer - restoration of decor model yacht Link to comment Share on other sites More sharing options...
liteflight Posted September 10, 2020 Share #77 Posted September 10, 2020 Not many people can say truthfully that they knitted a sea-going ship. Fascinating research and a very inventive way of presenting the sewing "through" the planks I have been interested in sewn ships since reading a National Geographic magazine where Tim Severin reproduced Sinbad's dhow and sailed it to replicate the wanderings (I was disappointed they didn't see or bring back a roc, though) I have just found while researching Viking ships that the Sami use sewn boats, then and now, as they had little access to metal mtaylor and Louie da fly 2 Quote Andrew "Pas d’elle yeux Rhone que nous” Kits under the bench: Le Hussard (Started in the 1980s) Scratch builds: Volante, Brig (R/C): Footy Drakkar "Rodolm" (R/C). Longship Osberg (R/C) Link to comment Share on other sites More sharing options...
Schrader Posted September 10, 2020 Author Share #78 Posted September 10, 2020 Thanks again. Yes there is still some work to do. I would say 20-25% related with ths ship itself I’m also thinking in some kind of “diorama” at the end..... let’s see mtaylor and Louie da fly 2 Quote Link to comment Share on other sites More sharing options...
Schrader Posted September 10, 2020 Author Share #79 Posted September 10, 2020 On 9/10/2020 at 4:44 AM, liteflight said: Not many people can say truthfully that they knitted a sea-going ship. Fascinating research and a very inventive way of presenting the sewing "through" the planks I have been interested in sewn ships since reading a National Geographic magazine where Toim Severin reproduced Sinbad's dhow and sailed it to replicate the wanderings (I was disappointed they didn't see or bring back a roc, though) I have just found while researching Viking ships that the Sami use sewn boats, then and now, as they had little access to metal Thanks for your kind words. Yes the Vikings also had developed some kind of construction system similar to Egyptians one. They had A mixture between sewing and metal really interesting i have the Viking in my next projects Jeronimo, Louie da fly and mtaylor 3 Quote Link to comment Share on other sites More sharing options...
Schrader Posted September 15, 2020 Author Share #80 Posted September 15, 2020 Here I am again...... I’ve been working In finishing the bow, hugging-truss, And gunwale...... The Hugging-truss has a kind o f belt and a traversed pole that in the future will “receive” all those thin threads. Instead to do it in brass and then lined with thread I went just using 4 0.8 mm thread, stick them with ciano in both faces..... Then I lined, creating a “belt” effect been able to keep the “eyes” in both sides to install the poles... KeithAug, Landrotten Highlander, GrandpaPhil and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Schrader Posted September 15, 2020 Author Share #81 Posted September 15, 2020 To have an overview how the ship is looking..... and this video..... IMG_0172.mov ` BANYAN, Landrotten Highlander, GrandpaPhil and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Louie da fly Posted September 15, 2020 Share #82 Posted September 15, 2020 Very clever. Looks good, too. Schrader and mtaylor 2 Quote It's not really a ship model unless you've bled on it. CURRENT BUILDS Golden City - Ballarat paddlewheeler La Lomellina - Theoretical Reconstruction of a Genoese carrack sunk in 1516 FINISHED Venetian merchant Ship from Basilica of San Marco Australian couta boat RMS Titanic HMVS Cerberus 11th century Byzantine dromon Winchelsea Nef - Late 13th century Mediaeval ship Henry Grace a Dieu - Rebuild of 1:200 model I started in 1967 Mistydeefer - restoration of decor model yacht Link to comment Share on other sites More sharing options...
BANYAN Posted September 15, 2020 Share #83 Posted September 15, 2020 Looks great. You must be close to using more twine than wood in this model soon cheers Pat Schrader and mtaylor 2 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64) Link to comment Share on other sites More sharing options...
Binho Posted September 16, 2020 Share #84 Posted September 16, 2020 Beautiful work Hellmuht! mtaylor and Schrader 2 Quote Alberto - "Binho" Current Build: Dusek 1:72 Scale Longship Digital Shipyard: Viking-era ships and boats 3D Art: Artstation, Sketchfab Link to comment Share on other sites More sharing options...
Schrader Posted September 16, 2020 Author Share #85 Posted September 16, 2020 8 hours ago, BANYAN said: Looks great. You must be close to using more twine than wood in this model soon cheers Pat Yes. You are right. I am in the process installing the hugging-truss. Looooong process a lot of thread. I would say 12 m aprox 0.15mm thread. Looking for the right appearance with the right tension mtaylor 1 Quote Link to comment Share on other sites More sharing options...
Schrader Posted September 16, 2020 Author Share #86 Posted September 16, 2020 Thanks again for watching and following this log. I’m really enjoying this model mtaylor and Binho 2 Quote Link to comment Share on other sites More sharing options...
Schrader Posted September 18, 2020 Author Share #87 Posted September 18, 2020 Hugging Truss!!!!!! 15 m of thread 0.15 mm diameter. Stressed and organized Fixed and tied... BLACK VIKING, mtaylor, KeithAug and 3 others 6 Quote Link to comment Share on other sites More sharing options...
wefalck Posted September 18, 2020 Share #88 Posted September 18, 2020 Only just now discovered this project ! Excellent rendering of the sewn technology. The old Egyptians must have had a hell of a time to make a ship out of the mediocre and small pieces of wood that was available only in their arid area. I gather the shipyard slaves would have loved to have a CNC-milling machine, considering that all those grooves and mortices had to be cut with bronze tools. mtaylor 1 Quote wefalck panta rhei - Everything is in flux Link to comment Share on other sites More sharing options...
Schrader Posted September 18, 2020 Author Share #89 Posted September 18, 2020 Thaks!!! Welcome. The wood came from Lebanon. Cedar to be more precise It has been a really fun project to work on thank again mtaylor 1 Quote Link to comment Share on other sites More sharing options...
wefalck Posted September 18, 2020 Share #90 Posted September 18, 2020 Oh, I forgot, yes they got the wood from there. The Lebanon cedar still is a pretty knotty wood ... and there is a chicken-and-egg-problem: you first to have ships to import the wood ... mtaylor 1 Quote wefalck panta rhei - Everything is in flux Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.