druxey Posted November 2, 2021 Share #61 Posted November 2, 2021 A bin usually has a lid, not a door. Is this the case here? Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv Link to comment Share on other sites More sharing options...
allanyed Posted November 2, 2021 Share #62 Posted November 2, 2021 Druxey I agree that this was normally the case but I remember seeing doors on the side of the bins on a drawing. This was quite a few years ago, so I'm not sure which ship/drawing. Time to dig out the old rolls of paper plans and take a look see. Allan druxey 1 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU Link to comment Share on other sites More sharing options...
wrkempson Posted November 2, 2021 Share #63 Posted November 2, 2021 There is a nice discussion of the bread bin configuration in Euryalus vol 1, p. 111. Your final conclusions (door or lid) will be defensible in either case. I did not find a treatment of the matter in Goodwin. Lavery, p. 189 states that bread was wrapped was not stored in casks, hence I suppose the bins. Perhaps the bread room employed racks. I looked in TFFM but did not find anything in a quick search. Wayne EricWilliamMarshall, matiz, druxey and 2 others 5 Quote Link to comment Share on other sites More sharing options...
allanyed Posted November 2, 2021 Share #64 Posted November 2, 2021 Thanks Wayne, Your memory of our conversation is waaaayyyy better than mine and I appreciate you posting about this. I knew this had been researched, just could not remember the circumstance. Cheers Allan mtaylor and matiz 2 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU Link to comment Share on other sites More sharing options...
matiz Posted November 8, 2021 Author Share #65 Posted November 8, 2021 Thanks for the explanations, I translated page 111 of the first volume, as mentioned, every space on the ship was precious, so, logically, it could also have been a high wall wrapped in tin with racks and an access door EricWilliamMarshall 1 Quote Link to comment Share on other sites More sharing options...
matiz Posted November 8, 2021 Author Share #66 Posted November 8, 2021 Hi🙂 KORTES, archjofo, jose_b and 13 others 15 1 Quote Link to comment Share on other sites More sharing options...
allanyed Posted November 8, 2021 Share #67 Posted November 8, 2021 (edited) Ciao Matiz, Sorry if you posted about this previously, but what is the material you are using for the bolts? When we worked on Euryalus I used blackened brass but since then I have gone to copper. The bolt can be inserted, cut, filed, cleaned (this is critical to get out copper filings) and then blackened in place with liver of sulfur. Your build is inspiring!!! Allan Edited November 8, 2021 by allanyed druxey, oneslim, EricWilliamMarshall and 2 others 5 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU Link to comment Share on other sites More sharing options...
matiz Posted November 8, 2021 Author Share #68 Posted November 8, 2021 Hi Allan, I use walnut, in this case of 7/10, for the hull, nails of 4/10 KentM and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
archjofo Posted November 8, 2021 Share #69 Posted November 8, 2021 Hello, what a fantastic work. I admire all who can do this kind of modeling. But in your case a particularly clean and precise work. matiz and mtaylor 2 Quote Best regards Johann Video: La Créole - Scale 1/48, French corvette of 1827 - naval artillery La Créole - Scale 1/48, French corvette - Construction of long boat La Créole - Scale 1/48, French corvette - Construction of the masts La Créole - Scale 1/48, French corvette - 2019 La Créole - Scale 1/48, French corvette - standing rigging - part 1 La Créole - Scale 1/48, French corvette - standing rigging - part 2 La Créole - Scale 1/48, French corvette - standing rigging - part 3 See also our german forum for Sailing Ship Modeling and History: www.segelschiffsmodellbau.com Link to comment Share on other sites More sharing options...
allanyed Posted November 9, 2021 Share #70 Posted November 9, 2021 Matiz, Sorry amico, but I have a few questions, I hope you don't mind😁 How are you drawing the walnut down so small and so well? I use a Byrnes plate and find bamboo works best for me, but never tried walnut. Do you know what species of walnut? Thanks!!! Allan mtaylor 1 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU Link to comment Share on other sites More sharing options...
matiz Posted November 9, 2021 Author Share #71 Posted November 9, 2021 (edited) Walnut or Mansonia, mansonia is the best, but tossic Edited November 9, 2021 by matiz bruce d, EricWilliamMarshall, KentM and 3 others 6 Quote Link to comment Share on other sites More sharing options...
allanyed Posted November 9, 2021 Share #72 Posted November 9, 2021 Need to find a nut and plant it for..... the next generation of ship modelers. Very pretty wood! Thanks Matiz bruce d, Justin P., mtaylor and 2 others 4 1 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU Link to comment Share on other sites More sharing options...
matiz Posted November 12, 2021 Author Share #73 Posted November 12, 2021 Hi, the stern platform jose_b, chris watton, archjofo and 13 others 16 Quote Link to comment Share on other sites More sharing options...
matiz Posted November 20, 2021 Author Share #74 Posted November 20, 2021 Hi 😊 bdgiantman2, dvm27, Jorge Diaz O and 18 others 20 1 Quote Link to comment Share on other sites More sharing options...
albert Posted November 20, 2021 Share #75 Posted November 20, 2021 Magnificent work. Anthony Hearne and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
matiz Posted November 22, 2021 Author Share #76 Posted November 22, 2021 On 11/20/2021 at 7:04 PM, albert said: Magnificent work. Tanks Alberto, and tanks to all mtaylor 1 Quote Link to comment Share on other sites More sharing options...
USNCHief013107 Posted November 24, 2021 Share #77 Posted November 24, 2021 I just paged through your build and I have no appropriate words for the artistry, attention to detail and craftmanship you have put into this build. BRAVO! mtaylor 1 Quote Link to comment Share on other sites More sharing options...
USNCHief013107 Posted November 24, 2021 Share #78 Posted November 24, 2021 May I ask where you obtained your plans that are shown in your photos? mtaylor 1 Quote Link to comment Share on other sites More sharing options...
matiz Posted November 25, 2021 Author Share #79 Posted November 25, 2021 Hello, and thank you, the plans are those of the monograph published by Sea Watch USNCHief013107 and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
matiz Posted November 27, 2021 Author Share #80 Posted November 27, 2021 Hi 😊 oneslim, archjofo, bruce d and 15 others 17 1 Quote Link to comment Share on other sites More sharing options...
Amalio Posted December 2, 2021 Share #81 Posted December 2, 2021 How good you are !!!!! I hope to meet you one day. matiz, Hubac's Historian and mtaylor 3 Quote AMALIO Link to comment Share on other sites More sharing options...
matiz Posted December 16, 2021 Author Share #82 Posted December 16, 2021 Hi 🙂 KentM, John Cheevers, mtaylor and 17 others 17 3 Quote Link to comment Share on other sites More sharing options...
albert Posted December 16, 2021 Share #83 Posted December 16, 2021 Hi Tiziano, great beautiful work. matiz and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
jose_b Posted December 16, 2021 Share #84 Posted December 16, 2021 Precious and neat work as usual. It's a pleasure to watch your progress. mtaylor and matiz 2 Quote Building Le François: http://modelshipworld.com/index.php/topic/9952-le-fran%C3%A7ois-by-jose-scale-1-48-1683/ Link to comment Share on other sites More sharing options...
allanyed Posted December 17, 2021 Share #85 Posted December 17, 2021 Ciao Matiz Thanks again for continuing to share, it is a pleasure to follow your build. buon Natale!!! Allan mtaylor, jansmiss and matiz 3 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU Link to comment Share on other sites More sharing options...
matiz Posted December 24, 2021 Author Share #86 Posted December 24, 2021 Hi, and thanks to all🙂 Merry Christmas and Happy New Year to all🎅 muratx, chris watton, gjdale and 12 others 15 Quote Link to comment Share on other sites More sharing options...
Anthony Hearne Posted December 24, 2021 Share #87 Posted December 24, 2021 merry christmas and happy new year to all you ,sir , are a true craftsman . mtaylor 1 Quote Link to comment Share on other sites More sharing options...
albert Posted December 24, 2021 Share #88 Posted December 24, 2021 Very nice work Tiziano. Quote Link to comment Share on other sites More sharing options...
allanyed Posted January 11, 2022 Share #89 Posted January 11, 2022 Matiz Looking forward to your next post and photos!! We are scheduled to dock (Celebrity Reflection) in La Spezia September 25th. I know Pisa is not too far and if you have some time, I truly hope we can meet and have lunch together, (and maybe see Euryalus😀) Ciao Allan mtaylor 1 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU Link to comment Share on other sites More sharing options...
Wintergreen Posted January 11, 2022 Share #90 Posted January 11, 2022 Very nice work Matiz! These fully framed models are such an accomplishment to build. Hats off! I have a question out of curiosity - the scale. The monographs from SeaWatch are given in 1:48 but you appear to build in 1:56? Which is slightly smaller of course. I am just curious. Keep it up! mtaylor and allanyed 2 Quote Happy modelling! Håkan __________________________________________ Current build: Atlantica by Wintergreen Previous builds Kågen by Wintergreen Regina by Wintergreen Sea of Galilee boat, first century, sort of... Billing Boats Wasa Gallery: Kågen (Cog, kaeg) by Wintergreen - 1:30, Billing Boats Regina - 1:30, Billing Boats Dana, Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.