Jump to content

DHC - 6 Twin Otter by JACK12477 - Revell 1:72 - FINISHED


Jack12477

Recommended Posts

Now for build number 2 in the anti-boredom project, the DHC -6 Twin Otter done in the colors of the Canadian Rescue service.  

 

First the box art and sprue contents, sorry I started building before I dragged out the camera, EG. 😉

 

20201229_132452.thumb.jpg.e3559f24c78515ebe0892b71f8147beb.jpg20201230_100231.thumb.jpg.b32bf468c35a1f51e46c263b8b8c1bcf.jpg20201230_100155.thumb.jpg.0dab1588eb2fa3960eb0ae6410a611ba.jpg20201230_100216.thumb.jpg.5449dabdc35616c9bd26fc7bab28edfe.jpg

 

The model can be built in one of 4 variants, including a float and ski plane. I prefer the ski plane variant and will build it as such

 

20201230_100447.thumb.jpg.ceda1b906e11ab76ee08aae7c283e398.jpg20201230_100350.thumb.jpg.12e1604bbae33143f5dc2e45fb882be8.jpg20201230_100402.thumb.jpg.4257e3b120c161cab77b66f329277193.jpg20201230_100327.thumb.jpg.823d138d54f476137e3030659b03c532.jpg

Decals provided

 

20201230_100954.thumb.jpg.073d27c96827fc24eca3614f77f51111.jpg

 

Edited by Jack12477
Link to comment
Share on other sites

So I started assembling the model. Only 4 sprue!  Not a lot of parts per sprue.  Assembled the cockpit interior which cannot be seen once the 2 halves are glued together, installed all the tiny glass windows, glued the hull halves together. Simple ! Added the engine nacelles to the wings, selected the nose cone for the variant.  Nose needs 20 g of weight to keep the nose wheel on ground (tail sitter), so I added a bunch of copper clad steel BBs.  And now senility sets in, to keep the BBs in place I squeezed some Testors plastic cement over the BBs and attached the nose cone to the hull. 

 

(You all know where this is going! Right ! ?) 🤔☹  Yep a few hours later I notice that the port side of the nose is slowly melting.......  😒  Left it overnight to see what would happen after the glue had fully cured.  Photos below show the disaster.

 

20201230_100129.thumb.jpg.b942a51d9849393451073f5519f25c2e.jpg

 



20201230_100604.thumb.jpg.811896a81a3cb117d761d39c29d8c0b8.jpg

20201230_100551.thumb.jpg.f46ee66af3171dbb8f898eb999f6afe5.jpg

20201230_095751.thumb.jpg.ac2c16123dabaa3e7cc9ebe9e67d07e6.jpg20201230_100006.thumb.jpg.b2b8e8d079f9abf1e2bc45a3217ca962.jpg20201230_095820.thumb.jpg.05b47bdd8ecf0e3cb97a46d79ebed18d.jpg

Guess this is what happens to "ole coots" when they spend too much time underground.. 😷 The ole grey matter turns to mush.

 

So today I took out the Tamiya White Putty and a small spatula and started filling in and reshaping the nose cone.   Stay tuned ! 

 

 

 

Edited by Jack12477
Link to comment
Share on other sites

I used to see Twin Otters quite regulary  flying over me.

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

Just seen the above  -  sorry to see that.

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

Good choice. One could also use Bondo Spot Putty (the red stuff that sticks to plastic).

 

There's them that has and then there's them that will.  Case of TMB, Jack.

 

 

 

 

 

 

 

Too Many Birthdays.

 

I'll get my coat and hat. ;)

Ken

Started: MS Bounty Longboat,

On Hold:  Heinkel USS Choctaw paper

Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1

Scratchbuild: Echo Cross Section

 

Member Nautical Research Guild

Link to comment
Share on other sites

3 minutes ago, Canute said:

Too Many Birthdays.

 

I'll get my coat and hat. ;)

You got that right !  But you can stay ! 

Link to comment
Share on other sites

Oh, goody. Off to the Peanut Gallery.

Ken

Started: MS Bounty Longboat,

On Hold:  Heinkel USS Choctaw paper

Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1

Scratchbuild: Echo Cross Section

 

Member Nautical Research Guild

Link to comment
Share on other sites

Sad to see you off to this kind of start Jack. I like the looks and lines of this aircraft. Hopefully you can recover and salvage the build.

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Link to comment
Share on other sites

3 hours ago, Jack12477 said:

sorry I started building before I dragged out the camera, EG.

No need to be, it's your choice as always..... 

 

Now I'm off to the peanut gallery... (hmmmnn, I wonder if I can hoist a comfy chair up there?)

Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale

In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale

Completed: M8A1 HST  1930 Packard Boattail Speedster  M1A1 75mm Pack Howitzer  F-4J Phantom II Bell H-13's P-51B/C

Temporary Suspension: USS Gwin DD-433  F-104C Starfighter "Blue Jay Four" 1/32nd Scale

Terminated Build: F-104C Starfighter

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Quote:

"Relish Today, Ketchup Tomorrow"

Link to comment
Share on other sites

read my mind Mark............can you say 'bird strike'....holy cow!   yea.....nasty :(    glad your gonna try to save it......next time,  white glue ;) 

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

11 hours ago, Egilman said:

Now I'm off to the peanut gallery... (hmmmnn, I wonder if I can hoist a comfy chair up there?)

We'll rig the block 'n' tackle up EG and get it up here.

Bad luck on the nose cone Jack, I  have full confidence that you'll get it sorted though 😏

Current builds;

 Henry Ramey Upcher 1:25

Providence whaleboat- 1:25     HMS Winchelsea 1764 1:48 

Completed:

HM Cutter Sherbourne- 1:64- finished    Triton cross section scratch- 1:60 - finished 

Non ship:  SBD-3 Dauntless 1:48 Hasegawa -FINISHED

 

 

Link to comment
Share on other sites

Needs shards of fiberglass and lots of blood. Don't ask how I know that one. 😌

Ken

Started: MS Bounty Longboat,

On Hold:  Heinkel USS Choctaw paper

Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1

Scratchbuild: Echo Cross Section

 

Member Nautical Research Guild

Link to comment
Share on other sites

Link to comment
Share on other sites

Looks good Jack. Back in the 70s, our intel shop had a number of models of Soviet jets that were in similar appearance. No mistaking what that represents. Smooth finish will blend it all in.

Ken

Started: MS Bounty Longboat,

On Hold:  Heinkel USS Choctaw paper

Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1

Scratchbuild: Echo Cross Section

 

Member Nautical Research Guild

Link to comment
Share on other sites

That should smooth out beautifully Jack.... 

 

Excellent recovery.....

Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale

In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale

Completed: M8A1 HST  1930 Packard Boattail Speedster  M1A1 75mm Pack Howitzer  F-4J Phantom II Bell H-13's P-51B/C

Temporary Suspension: USS Gwin DD-433  F-104C Starfighter "Blue Jay Four" 1/32nd Scale

Terminated Build: F-104C Starfighter

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Quote:

"Relish Today, Ketchup Tomorrow"

Link to comment
Share on other sites

Same as EG says  - great recovery.

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

That's some great "cosmetic surgery" there - good job sticking with it and not giving up!

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32  Eduard Sikorsky JRS-1 1/72  IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

A little more smoothing and it's on to bigger and better things. Congratulations Jack. Are you going to make her float, ski, or wheeled?

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Link to comment
Share on other sites

Good rescue with the nose cone ! Jack😉

Current builds;

 Henry Ramey Upcher 1:25

Providence whaleboat- 1:25     HMS Winchelsea 1764 1:48 

Completed:

HM Cutter Sherbourne- 1:64- finished    Triton cross section scratch- 1:60 - finished 

Non ship:  SBD-3 Dauntless 1:48 Hasegawa -FINISHED

 

 

Link to comment
Share on other sites

Thumbs up, Jack and you're good to go with the repair.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

looks great!.....knew you could pull it off!  fine sandpaper and you'll have the shin back to normal ;)   are you going to replace the glass......some clear cello should do it.  get some Testor's window maker to cement the cello in place .   good save!

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

replacing the windscreen would be near disastrous.  Already had to use G-S Hypo Cement to replace side window that went bling into never-ending land of missing parts. Actually it was the GS glue that messed up the windscreen in the first place. 

Edited by Jack12477
Link to comment
Share on other sites

Well, this isn't coming out the way I first envisioned but moving on.  Trying to fix/hide the botched panel lines, getting the paint to cover etc.  

 

20210104_214013.thumb.jpg.96354cfeac5ccaf24f30699fa14d97f3.jpg20210107_154013.thumb.jpg.5f1267f148ba495f58dd76bdcb590aff.jpg20210107_154034.thumb.jpg.740c9910c8e848300fca33244ccc1e51.jpg20210107_154048.thumb.jpg.b2190a6509f8e6dc2583b4f36a9bde65.jpg

 

The paint I am using is Liquitex Cadmium Yellow acrylic

 

 

20210107_154150.thumb.jpg.f9e9c4d08f0a7a1942ba67f3e77f3c5e.jpg

 

Link to comment
Share on other sites

Just a suggestion Jack, when I used to do yellow on my grey plastic miniatures I primed them first with an off white/cream,  made for a better cover without brightening the yellow too much. As I say just a thought.

 

Current builds;

 Henry Ramey Upcher 1:25

Providence whaleboat- 1:25     HMS Winchelsea 1764 1:48 

Completed:

HM Cutter Sherbourne- 1:64- finished    Triton cross section scratch- 1:60 - finished 

Non ship:  SBD-3 Dauntless 1:48 Hasegawa -FINISHED

 

 

Link to comment
Share on other sites

Yes, yellows are translucent, like the tube label says (as are reds) and the primer is critical. Add another coat of yellow, taking some of the sheen off to get the next coat to stick.

Ken

Started: MS Bounty Longboat,

On Hold:  Heinkel USS Choctaw paper

Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1

Scratchbuild: Echo Cross Section

 

Member Nautical Research Guild

Link to comment
Share on other sites

Link to comment
Share on other sites

That's a good primer and light gray should work. It's the translucent yellow. Strip and redo or try a second coat? I'd try a second coat. If its still like that, do-over time.

Ken

Started: MS Bounty Longboat,

On Hold:  Heinkel USS Choctaw paper

Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1

Scratchbuild: Echo Cross Section

 

Member Nautical Research Guild

Link to comment
Share on other sites

Yes I would have thought it should be ok with two coats over that primer. 

Current builds;

 Henry Ramey Upcher 1:25

Providence whaleboat- 1:25     HMS Winchelsea 1764 1:48 

Completed:

HM Cutter Sherbourne- 1:64- finished    Triton cross section scratch- 1:60 - finished 

Non ship:  SBD-3 Dauntless 1:48 Hasegawa -FINISHED

 

 

Link to comment
Share on other sites

51 minutes ago, Jack12477 said:

This is the Tamiya primer I use, light gray.  Guess maybe I should try their white primer instead.

 

IMG_8738.JPG.fa16b498c9c24c837167439505ab5a7e.JPGIMG_8739.JPG.e9c209d2478579e3942d1508adb55f5a.JPG

Thats what I use  on my aircraft models.

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...