Jump to content

1895 Horse-Drawn Hearse Wagon by Kevin - FINISHED - Model Trailways - 1/12 - Completed July 2021


Recommended Posts

good morning everyone

 

and now for something different

 

BRIEF HISTORY 

 

Originally, the wooden or metal framework over the coffin was called a hearse. It was decorated with numerous spikes to hold burning candles. Sometime in the 17th century, people started using the word to refer to not only the construction above the coffin, but to the vehicle that carried the casket to the grave. Early hearses were hand-drawn. As time went on, families started to choose rural cemeteries instead of traditional church grounds. Caskets had to be transported greater distances. People wanted to go out in style and ordered elaborately decorated coffins in exotic woods. The hearses became fancier and heavier. They needed horsepower, not manpower. The first American horse-drawn hearses date back to the mid nineteenth century. A typical horse-drawn hearse of that period cost about $1,500.

 

KIT FEATURES 

Historically accurate, highly detailed model 

Laser cut basswood parts 

Basswood wheel rims & spokes 

Cast Britannia metal axles & shafts 

Machine turned aluminium wheel hubs 

Photo-etched brass ornamentation 

5 sheets of detailed plans 

48-page illustrated instruction manual Instructions & prototype model by Ken Foran 

MODEL SPECIFICATIONS 

 Length: 13” Height: 8” Width: 5” Scale: 1:12

Horse-drawn-hearse-model-kit-MG_1539-2.jpg&maxx=108&maxy=108horse-drawn%20hearse%20model%20kit%20imghorse-drawn%20hearse%20model%20kit%20imghorse-drawn%20hearse%20model%20kit%20img

Link to comment
Share on other sites

That is so funny.... I was looking at the Micro-Mark catalog yesterday and came to the page where that kit is described. I was wondering, who could have fun building a Hearse Wagon with the miniature coffin inside from 1895.... The answer came today !!!! Kevin !!! LOL

 

Yves

Link to comment
Share on other sites

54 minutes ago, yvesvidal said:

That is so funny.... I was looking at the Micro-Mark catalog yesterday and came to the page where that kit is described. I was wondering, who could have fun building a Hearse Wagon with the miniature coffin inside from 1895.... The answer came today !!!! Kevin !!! LOL

 

Yves

lol well that spooky, dead spooky at that 

Link to comment
Share on other sites

3 hours ago, Kevin said:

lol well that spooky, dead spooky at that 

I checked Micro Mark as well and almost dropped the hammer on it myself....

Edited by Egilman

Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale

In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale

Completed: M8A1 HST  1930 Packard Boattail Speedster  M1A1 75mm Pack Howitzer  F-4J Phantom II Bell H-13's P-51B/C

Temporary Suspension: USS Gwin DD-433  F-104C Starfighter "Blue Jay Four" 1/32nd Scale

Terminated Build: F-104C Starfighter

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Quote:

"Relish Today, Ketchup Tomorrow"

Link to comment
Share on other sites

good evening everyone

 

some of you may have seen a recent post wrt to a 1/12 Tudor mansion that the wife found thinking i had thrown it out 10+ years ago

 

to cut a story short a couple of hours discussions about what to do with it then perused

thoughts of putting in a display case then turned into a diorama idea, which in turn made me look for a royal mail British horse drawn carriage, which i have ordered, however i saw this and it arrived first

 

this is the box contents, looks quite good value for the money, off Amazon, actually it was 1/2 the price of Cornwall Model Boats and fleabay

 

 

 

 

 

IMG_0284.JPG

IMG_0285.JPG

IMG_0286.JPG

IMG_0287.JPG

IMG_0288.JPG

IMG_0289.JPG

IMG_0290.JPG

IMG_0291.JPG

IMG_0292.JPG

IMG_0293.JPG

IMG_0294.JPG

IMG_0295.JPG

 

IMG_0296.JPG

Britannia white metal, will need cleaning up a bit 

IMG_0297.JPG

IMG_0298.JPG

IMG_0299.JPG

IMG_0300.JPG

 

 

 

 

5 sheets of plans all 1/1 at 1/12 scale

 

IMG_0304.JPG

IMG_0305.JPG

IMG_0301.JPG

IMG_0302.JPG

IMG_0303.JPG

Edited by Kevin
Link to comment
Share on other sites

the floor has push out in which rollers are put in at a later date

IMG_0307.thumb.JPG.d90d7459572c08997c69b21d6c5ed353.JPG

all the side panels are laminated by gluing one panel over another, the outer side is rebated to take the windows

 

IMG_0308.thumb.JPG.a420bb4bdaa2638002a94e5d6a8a0160.JPGIMG_0309.thumb.JPG.745663c86e9227a85231e1f40c364290.JPG

4 sides and 2 end panel door/windows

 

IMG_0314.thumb.JPG.dadabff95956d4e3745445345fec1aa4.JPGIMG_0315.thumb.JPG.507e6666f3309ed6f8554e9b6b6aa9e5.JPGIMG_0316.thumb.JPG.ebf7cd459a57ecc6d3863aa7ad8fb7e9.JPGIMG_0317.thumb.JPG.76a47e70e29ddc154d032f57be3eec6a.JPG

these inners bars will support the after wheels

IMG_0318.thumb.JPG.ba89fe835381ea1b642153a724a862d9.JPGIMG_0319.thumb.JPG.dca49c2926dd5cc9123a84ba2a8e9234.JPG

me faithful boi, struggling with the warm temperatures

IMG_0320.thumb.JPG.5161adcf1d20595637c498b35411a7de.JPG

making up the driver position

IMG_0321.thumb.JPG.381daa8deb63480088f58cd1076280e0.JPGIMG_0322.thumb.JPG.3ca3d17f6e39be8b4c1999e8fa6ba431.JPGIMG_0323.thumb.JPG.1a09986da78e8826ddc2e04a46d3ae12.JPGIMG_0324.thumb.JPG.def79ce816b1d5fcc880f214c5c72d35.JPGIMG_0325.thumb.JPG.8814c51651bac63aeb32e6eec7b30dfd.JPGIMG_0326.thumb.JPG.dbf763502642913e6bcc8b4bb8bb12ec.JPGIMG_0327.thumb.JPG.b0cca8694cfae6379999429b392913c1.JPGIMG_0328.thumb.JPG.b621fd4cdd1842743d05f15de6fe3202.JPGIMG_0329.thumb.JPG.c29bd0ae54959dd86803846b89730a02.JPGIMG_0330.thumb.JPG.b5d96c03e70dae6d51ea0925e5d15f48.JPGIMG_0331.thumb.JPG.52db402f6b5a05bab347ec3d11416c31.JPGIMG_0332.thumb.JPG.b4457b21273539bac563b3167ddf74ab.JPGIMG_0333.thumb.JPG.eec6afa7fb61a96edaa0425b32d97ce1.JPGIMG_0334.thumb.JPG.9bb9b0c7782cac8512f57f428b961ec8.JPGIMG_0335.thumb.JPG.eee9e609ed60ccd22fa000fbb967f16c.JPGIMG_0336.thumb.JPG.1076e30d52ded00cedb7a06235329b45.JPGIMG_0337.thumb.JPG.1f74588eb6a27fe565e751fc32a143d9.JPG

first full coat of primer, everything will now be sanded, filler if any, then reprimed

IMG_0338.thumb.JPG.974523a4ad33558b09a89b0d0475803c.JPGIMG_0339.thumb.JPG.927914b07f28c3dad876239d8fa48b07.JPG

Link to comment
Share on other sites

14 minutes ago, Canute said:

very nice. You're moving right along.

it goes together very well,

Link to comment
Share on other sites

I see that this kit is another Ken Foran design, so I expect it will be a good one. Nice start.

Link to comment
Share on other sites

9 hours ago, gjdale said:

I see that this kit is another Ken Foran design, so I expect it will be a good one. Nice start.

Good morning Grant, tell the truth, i had never heard of him, just looked at some of his wonderful work

Link to comment
Share on other sites

He’s also a member of this forum Kevin - goes by the screen name “Xken”. He also designed the Allerton Steam Pumper kit I’m just starting. You’ll see some similarities in design principles between the two.

Link to comment
Share on other sites

good evening everyone

 

warm here in the UK at present, and we aint used to it, so not much done to the build, the carriage has had a top coat, i will fine sand again and do again

 

the wheels are made up but nothing is glued, so i will strip them down again and do a much better clean up job on them, they can then be filed to shape to get realistic looking spokes

 

 

IMG_0340.JPG

IMG_0341.JPG

IMG_0342.JPG

IMG_0343.JPG

IMG_0344.JPG

IMG_0345.JPG

Link to comment
Share on other sites

Interesting!  Someone has a log for an old west stagecoach I was looking at and wondering whether to buy. I did go the trouble of looking for 1/12 scale horses - which do exist. Your hearse would look great hitched to a Breyer 1/12 Fairfax, and you'd have the additional challenge of making the tack from scratch........

Link to comment
Share on other sites

17 minutes ago, Ian_Grant said:

Interesting!  Someone has a log for an old west stagecoach I was looking at and wondering whether to buy. I did go the trouble of looking for 1/12 scale horses - which do exist. Your hearse would look great hitched to a Breyer 1/12 Fairfax, and you'd have the additional challenge of making the tack from scratch........

Lol just what i want to do

Link to comment
Share on other sites

8 hours ago, Ian_Grant said:

Interesting!  Someone has a log for an old west stagecoach I was looking at and wondering whether to buy. I did go the trouble of looking for 1/12 scale horses - which do exist. Your hearse would look great hitched to a Breyer 1/12 Fairfax, and you'd have the additional challenge of making the tack from scratch........

im yet to find something that looks realistic, horse/pony

Link to comment
Share on other sites

good evening everyone

 

build continues

interior

the rollers are 19mm long and wooden dowel is provided for that purpose, but i had some right dia plastic tubing, easier to cut, primed and sprayed with Ford antique gold rattle can paint

IMG_0363.thumb.JPG.49efb82498c3cad08e362fc2b29c6c35.JPG

 

 

IMG_0351.thumb.JPG.76923b8a9531bd7b854c1de9315dead6.JPG

IMG_0364.thumb.JPG.871ac128dd477966d01aaa0303fd3370.JPG

the coffin rails are white metal stations with brass tubing slotted in-between, also in the kit

IMG_0347.thumb.JPG.59ecf3e65baaf516e18b2827f951dc4a.JPGIMG_0348.thumb.JPG.10136b90e15a42cdcca105aa313f60e0.JPGIMG_0349.thumb.JPG.e8ebdc0ac1deee5a44684973da847310.JPGIMG_0350.thumb.JPG.3b674b823436b1c9596955148496e71f.JPGIMG_0364.thumb.JPG.871ac128dd477966d01aaa0303fd3370.JPGIMG_0365.thumb.JPG.70f3b8eafb784bdea426305f76e49a8f.JPGIMG_0366.thumb.JPG.0648e8f40264553e0103314527cac5fe.JPGIMG_0367.thumb.JPG.6cadd8204c41f220ce7dae3e9a69d248.JPG

rear wheel suspension was also made up, nothing of the metal bits has taken long to clean up

IMG_0352.thumb.JPG.3c571cdce8c2c873e83685611066c29a.JPGIMG_0353.thumb.JPG.a7a98b7dd98ed328b142fb38d0fd586e.JPGIMG_0354.thumb.JPG.b58a415c52ff9fca1c5675f0ee0f229d.JPGIMG_0355.thumb.JPG.92bc17198aedd46c2ddd6bbe332514db.JPGIMG_0356.thumb.JPG.0239329b2db16e9664e70906140350a4.JPGIMG_0357.thumb.JPG.9b5c106d5e94dfd78cb19f4a1a04cc73.JPGIMG_0358.thumb.JPG.1118cdf754fa9ee9523633cd23c3176a.JPGIMG_0359.thumb.JPG.4d4b20c7a88287d4a7efbd8e9d0c328d.JPGIMG_0360.thumb.JPG.5f826fd1153e09a22a18abfa954c9c6e.JPGIMG_0361.thumb.JPG.f5519716d1a20fd4f0235ea20da81328.JPGIMG_0362.thumb.JPG.829cc860b7e7bd3c7d3a2c5fcd128d8a.JPG

 

Edited by Kevin
Link to comment
Share on other sites

Wow Kevin.......your progress on the Hearse looks super!   when I first started reading,  the first thing I thought of was Dracula ;) :D ......you know......Egor at the reigns.....   are you gonna gussie up the pine box?

 

I have two wagons.......I have the Budweiser Clydesdale wagon and the Lindberg stage coach.  both came with horses and figures.   I'm sure you could find horses for yours.   great job so far :) 

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

thank you Dennis, dont quite know how its going to be presented yet, the wife is contemplating turning one of her dolls houses (shop fronted), into a wagons for hire then i could just park it outside , i have another one arrive today 

 71rtmtTUymL._AC_SL1171_.jpg

Link to comment
Share on other sites

The Concord Stage Coach Gallery-The Overland Trail--10/04/01

 

Tombstone Times - The Stagecoaches - Their Origin and Place in History by Larry Noyes

 

here's a couple of articles I dug up in my research.   I started to do a little on the stage coach,  but I wanted to do something with mahogany,  so I tabled it till I figured it out.  also thinking of subbing in some leather and cloth window sashes.   the Lindberg model is over 30 inches long with the horses

490840417_3.jpg.19e9a8be7739721ab736eecd0022748e.jpg

here are the Clydesdales

996978132_onthebase.jpg.4b5a37cfc02b0f13545efeeabfa383c6.jpg

articles I've read on these two models {the lindberg especially}  stated that the horses were really hard to assemble.....poor fit.  I didn't think so....not with the proper clamps ;)   gotta clean them up and paint them.

 

now your making me wish I bought wood ones :(    the Bud wagon is rare though.   I've seen it before but never got a chance to pull the trigger on one.

    got one before I boarded the long black train  ;) 

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Excellent work Kevin  - so much detail in those suspension units.

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

Nice work on the Hearse Kevin. Its a little unusual for these to be modeled but nonetheless they are quite common in the museums that deal with carriages and old cars at least across the the west. Cardston AB has a world class carriage museum. If Canada ever opens up I would recommend you visit there. Its close to GLacier park in the US anad the Waterton park and Banff in Canada. I'd recommend the Breyer horse too. They aren't quite so wild looking as the Lindberg ones. You want something quiet and dignified for a person's last ride.

Bill, in Idaho

Completed Mamoli Halifax and Billings Viking ship in 2015

Next  Model Shipways Syren

Link to comment
Share on other sites

it's a wild west subject Bill........they are portrayed in motion.  I think Sjors had some horses made for the model he built some time ago.  you could check with him to find where he got them.  they are an interesting subject though,  as some were very ornate.......lots of gold trim and lanterns

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

thanks for the comments guys, im not 100% convinced of any nags i have seen yet

 

i have done a bit more on the build today, will update tomorrow, it might have cooled down by then, rain is forecast, my computer room is unbearable during this warm weather

 

Link to comment
Share on other sites

good evening everyone

 

doors

 

there was one one hinge supplied instead of 4, replacements come from the states, so i raided the wife dolls house spare parts found 4 and fitted, both doors open

just handle to fit

IMG_0390.thumb.JPG.c317250bf7fcc2f2ba7e2ec99ef398c2.JPGIMG_0391.thumb.JPG.e5e168fd7788fec32ad094b4a414506e.JPGIMG_0398.thumb.JPG.3b0dae5fedbc6d35fb08a47c4a942609.JPGIMG_0402.thumb.JPG.b5ef888f649f22489922e83c5ff79269.JPG

 

glazing

a simple job, but rather than paint the glazing strips black i did them antique gold, it looks ok

the very thin plastic film was protected in a p[plastic envelope, but for some reason it is marked by the outline of the photo etch decoration which was also in a plastic envelope - spooky,  i did to clean it off somehow

 

IMG_0397.thumb.JPG.ffd1b64a8bb418c02a2c8aed05acd25a.JPGIMG_0398.thumb.JPG.3b0dae5fedbc6d35fb08a47c4a942609.JPG

seat

wasnt happy about just painting it brown, so i covered it in leatherette, then put a piping around it to hide the white edges, this them made it to wide for the kit supplied back rest so made one out of brass

IMG_0387.thumb.JPG.c5ea3d2b70301b645c34a49f357c1c49.JPGIMG_0388.thumb.JPG.39ba4a5371acb149ccb9f1ff290bb76f.JPGIMG_0389.thumb.JPG.42357152989bcf1c919f432917b18e31.JPGIMG_0392.thumb.JPG.dbac9dad4dfaef0765f22df540133608.JPGIMG_0393.thumb.JPG.2eabc6d27475957c52f7b50b9161aae9.JPGIMG_0412.thumb.JPG.e171cc77d357612ce4daa4fa5094e454.JPG

 

front suspension ongoing

IMG_0373.thumb.JPG.223a36e3c94df44da09c52e4f747af22.JPGIMG_0374.thumb.JPG.1c3445562573db3ca547e4e9ccb72b92.JPGIMG_0376.thumb.JPG.4e69e5767d1795b1dd5405c9cffc23fd.JPGIMG_0377.thumb.JPG.bd3435036c9978d16afa5fb97fea34fb.JPGIMG_0378.thumb.JPG.cec5c372ffc23cdbc223ff668a7b9535.JPGIMG_0379.thumb.JPG.4d1a236b6f32e02cdd8c2bdec0b9e8dc.JPGIMG_0380.thumb.JPG.6ae5e395a71feed28badd46102dc47cb.JPG

 

decoration is now on, just needs tidying up

IMG_0371.thumb.JPG.1caa964e6a350140c741332532a513f5.JPGIMG_0372.thumb.JPG.a7b1ccd9eec7926412004baa5b29ac19.JPG

 

 

 

IMG_0410.thumb.JPG.b62fd8af84404c0651538a70ca51cca7.JPGIMG_0411.thumb.JPG.f290073724f7158e74723fa297436de1.JPGIMG_0413.thumb.JPG.611a02f8196fd23134ebe0e1bb005fdb.JPGIMG_0414.thumb.JPG.f74d29fbb7f274664d99eb84b2f0afda.JPGIMG_0415.thumb.JPG.e5d2a56a6ab2f2f383a20c55ce9b39b1.JPGIMG_0416.thumb.JPG.b4cf1e69fc246a569f08add68d810425.JPGIMG_0417.thumb.JPG.8eea3ef50da272a48c22249a9383eb5f.JPG

 

 

 

 

 

 

 

IMG_0385.JPG

IMG_0386.JPG

IMG_0408.JPG

IMG_0409.JPG

 

IMG_0375.JPG

IMG_0399.JPG

IMG_0401.JPG

IMG_0400.JPG

Edited by Kevin
Link to comment
Share on other sites

That is looking Super mate  - all that bling really stands out.

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

Link to comment
Share on other sites

Good morning everyone

 

this little project is quickly coming to an end

the front suspension was made up along with the 5th wheel (steering head), primed and gloss black top coat

 

everything apart from the wheels is now finished and ready to be attached

my next post will be in a couple days with the final reveal

 

IMG_0419.thumb.JPG.7dc7faac05ecb3adb83dbae32c9fa0b4.JPGIMG_0424.thumb.JPG.ce0b71a8e0128e49c1bd15b77ec3ed04.JPGIMG_0429.thumb.JPG.e877e3798d6dbb45c479a733268ce37b.JPGIMG_0437.thumb.JPG.84c08d8478c7f111d778d7f2d1842264.JPGIMG_0440.thumb.JPG.e23656ae8596c7f7a218a16e05954463.JPGIMG_0443.thumb.JPG.15238e86c14ae5d168c5df36e63823a4.JPGIMG_0444.thumb.JPG.9bf91c2946df72cce0e02c1109c11e10.JPG

 

 

 

 

 

 

Edited by Kevin
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...