westwood Posted February 6, 2022 Author #31 Posted February 6, 2022 Hi guys, the first layer of wales is done and I've started painting the gunports. I'm not at all sure if this is a good red. It's this one: Vallejo Cadmium Red Medium Wouldn't it be better: Vallejo Cadmium Red Deep Unfortunately I can't get a better picture of it. What do you think? There is only the first coat so far. BobG, Chuck, Saburo and 7 others 10 Dusan Currently building: HMS Winchelsea 1764 by westwood - 1:48 Revenge 1577 - by westwood - 1:64 In preparation: Fourth-rate ship 1681 - 1:48
glbarlow Posted February 6, 2022 #32 Posted February 6, 2022 (edited) I used Cadium Red on Cheerful, it looks great. There is no best color other than the one you like. Personally I like RED. Edited March 6, 2022 by glbarlow westwood, Saburo and FrankWouts 3 Regards, Glenn Current Build: Royal Barge, Medway Long Boat Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose
FrankWouts Posted February 14, 2022 #33 Posted February 14, 2022 Looking good Drusan and already a beautiful build! I only saw just now that you're from Slovakia! I have friends in Cigel and Prievidza! Is that close to you? westwood 1 Current builds on MSW: HMS Winchelsea 1:48: Prior builds on MSW: None
Vladimir_Wairoa Posted February 15, 2022 #34 Posted February 15, 2022 Im from Slovakia too . ! So we have 2 winnies here ! Woohoo. Great work Dušan. westwood and FrankWouts 1 1
westwood Posted February 15, 2022 Author #35 Posted February 15, 2022 Thanks guys, Frank I'm about 50km far from Prievidza and I have a classmate there. Wow I didn't know that Vlado, what a good coincidence. Two Winnie on the Váh 😀 Saburo, Vladimir_Wairoa and FrankWouts 3 Dusan Currently building: HMS Winchelsea 1764 by westwood - 1:48 Revenge 1577 - by westwood - 1:64 In preparation: Fourth-rate ship 1681 - 1:48
Jorge Diaz O Posted March 1, 2022 #36 Posted March 1, 2022 On 6/2/2022 at 15:12, westwood said: Hola chicos, la primera capa de Gales está lista y comencé a pintar las portas. No estoy del todo seguro de si este es un buen rojo. Es este: Vallejo Cadmium Red Medium No sería mejor: Vallejo Cadmium Red Deep Desafortunadamente no puedo obtener una mejor imagen de él. ¿Qué piensas? Solo queda la primera capa hasta el momento. Hello, the correct color of that time is Indian red. FrankWouts 1 -HMS Tritón 1/48 1773 en scracht (TERMINADO) -HMS Winchelsea 1/35 1764 full scracht (EN PROYECTO)
Jorge Diaz O Posted March 1, 2022 #37 Posted March 1, 2022 On 6/2/2022 at 15:12, westwood said: Hola chicos, la primera capa de Gales está lista y comencé a pintar las portas. No estoy del todo seguro de si este es un buen rojo. Es este: Vallejo Cadmium Red Medium No sería mejor: Vallejo Cadmium Red Deep Desafortunadamente no puedo obtener una mejor imagen de él. ¿Qué piensas? Solo queda la primera capa hasta el momento. westwood and Saburo 2 -HMS Tritón 1/48 1773 en scracht (TERMINADO) -HMS Winchelsea 1/35 1764 full scracht (EN PROYECTO)
westwood Posted March 16, 2022 Author #38 Posted March 16, 2022 Hey guys, I haven't made a post in a long time, even though I've been working almost every day. I also bought Cadmium Red Deep and I like it more. The third time I painted the gunnports with a mixture of 1part Cadmium medium and 2 parts deep. Unfortunately it doesn't show up well in the pics. In real it looks better. But when I do the inner planking I will experiment more. I may end up using only Cadmium Red Deep. Edwardkenway, FrankWouts and Saburo 3 Dusan Currently building: HMS Winchelsea 1764 by westwood - 1:48 Revenge 1577 - by westwood - 1:64 In preparation: Fourth-rate ship 1681 - 1:48
westwood Posted March 16, 2022 Author #39 Posted March 16, 2022 ...then I had to cut the strips for planking, first batch... Mldixon, Rustyj, FrankWouts and 3 others 6 Dusan Currently building: HMS Winchelsea 1764 by westwood - 1:48 Revenge 1577 - by westwood - 1:64 In preparation: Fourth-rate ship 1681 - 1:48
westwood Posted March 16, 2022 Author #40 Posted March 16, 2022 some photos from planning above the wales FrankWouts, scrubbyj427, CiscoH and 6 others 8 1 Dusan Currently building: HMS Winchelsea 1764 by westwood - 1:48 Revenge 1577 - by westwood - 1:64 In preparation: Fourth-rate ship 1681 - 1:48
westwood Posted March 16, 2022 Author #41 Posted March 16, 2022 planking above the wales after a month of work, final result ... Nunnehi (Don), Guillermo Eduardo Madico, Trussben and 15 others 18 Dusan Currently building: HMS Winchelsea 1764 by westwood - 1:48 Revenge 1577 - by westwood - 1:64 In preparation: Fourth-rate ship 1681 - 1:48
Stuntflyer Posted March 16, 2022 #42 Posted March 16, 2022 Nice work, Dusan FrankWouts and westwood 2 Current build - Sloop Speedwell 1752 (POF) Completed builds - 18 Century Longboat (POB) , HM Cutter Cheerful 1806 (POB), HMS Winchelsea 1764 (POB) Member: Ship Model Society of New Jersey
glbarlow Posted March 16, 2022 #43 Posted March 16, 2022 (edited) Well done! Edited April 17, 2022 by glbarlow westwood and FrankWouts 2 Regards, Glenn Current Build: Royal Barge, Medway Long Boat Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose
Rustyj Posted March 17, 2022 #44 Posted March 17, 2022 Very nice workmanship! FrankWouts and westwood 2 Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout
Edwardkenway Posted March 17, 2022 #45 Posted March 17, 2022 20 hours ago, Stuntflyer said: Nice work, Dusan 20 hours ago, glbarlow said: We’ll done! 3 hours ago, Rustyj said: Very nice workmanship! My thoughts also, superb planking! FrankWouts and westwood 2 Current builds; Henry Ramey Upcher 1:25 Providence whaleboat- 1:25 HMS Winchelsea 1764 1:48 Completed: HM Cutter Sherbourne- 1:64- finished Triton cross section scratch- 1:60 - finished Non ship: SBD-3 Dauntless 1:48 Hasegawa -FINISHED
westwood Posted March 20, 2022 Author #46 Posted March 20, 2022 Thank you for the nice comments and for the likes guys, it always encourages! On the starboard side I glued the first two strakes below the wales. Maybe I'll add 1-2 more strakes to make it sanding smoother . But before that - Lining of the Hull. And then I'll add a second layer of wales, what I'm looking forward to it. FrankWouts, rafine, scrubbyj427 and 9 others 12 Dusan Currently building: HMS Winchelsea 1764 by westwood - 1:48 Revenge 1577 - by westwood - 1:64 In preparation: Fourth-rate ship 1681 - 1:48
glbarlow Posted March 20, 2022 #47 Posted March 20, 2022 The second layer and paint makes it look so much more like a ship. Fun stuff😊 Your planking looks great. Saburo, westwood, CaptnBirdseye and 1 other 4 Regards, Glenn Current Build: Royal Barge, Medway Long Boat Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose
FrankWouts Posted March 21, 2022 #48 Posted March 21, 2022 Beautiful and steady work Dusan! Saburo and westwood 2 Current builds on MSW: HMS Winchelsea 1:48: Prior builds on MSW: None
westwood Posted April 12, 2022 Author #49 Posted April 12, 2022 Linning off the Hull ... only a few pictures, Thanks to Chuck's tick strips, I only needed to make slight adjustments. But surely a constant check during the planking will be necessary. Before I started the second layer of wales I glued one strake as I planned. FrankWouts, Edwardkenway, rafine and 4 others 5 2 Dusan Currently building: HMS Winchelsea 1764 by westwood - 1:48 Revenge 1577 - by westwood - 1:64 In preparation: Fourth-rate ship 1681 - 1:48
westwood Posted April 12, 2022 Author #50 Posted April 12, 2022 scrubbyj427, Saburo, Freebird and 4 others 6 1 Dusan Currently building: HMS Winchelsea 1764 by westwood - 1:48 Revenge 1577 - by westwood - 1:64 In preparation: Fourth-rate ship 1681 - 1:48
westwood Posted April 12, 2022 Author #51 Posted April 12, 2022 So I'm slowly getting closer to finishing the second layer of wales, one test... rafine, CaptMorgan, FrankWouts and 3 others 5 1 Dusan Currently building: HMS Winchelsea 1764 by westwood - 1:48 Revenge 1577 - by westwood - 1:64 In preparation: Fourth-rate ship 1681 - 1:48
Chuck Posted April 12, 2022 #52 Posted April 12, 2022 Lovely planking so far. Just watch the planking over the first three bulkheads as you work your way lower. I see many people start to develop a dip there that will look like a dent in the hull in the lower two belys. Try and correct this if you see this developing. And absolutely turn the hull right side up to check this.....its the only way to really tell for sure. Chuck Rustyj, FrankWouts, westwood and 2 others 5 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY
westwood Posted April 12, 2022 Author #53 Posted April 12, 2022 Thank you Chuck for both the compliments and the warning. I hope I can prevent the mistake you mention. FrankWouts 1 Dusan Currently building: HMS Winchelsea 1764 by westwood - 1:48 Revenge 1577 - by westwood - 1:64 In preparation: Fourth-rate ship 1681 - 1:48
westwood Posted April 17, 2022 Author #54 Posted April 17, 2022 Thanks for the likes guys, some photos for Easter... I added the anchor lining and after the final sanding of the second layer of wales I used a Fiebings Leather Dye stain. I like it because it is beautiful to see the texture of the wood. But the processing was difficult. Edwardkenway, Freebird, JpR62 and 6 others 9 Dusan Currently building: HMS Winchelsea 1764 by westwood - 1:48 Revenge 1577 - by westwood - 1:64 In preparation: Fourth-rate ship 1681 - 1:48
westwood Posted April 17, 2022 Author #55 Posted April 17, 2022 Maybe I was too hurried because after finishing the planking there will still be a lot of sanding to be done, and then I'll apply one more final coat and then add the Black strake at last. And on top of that will be applied liquid wax. (that is the plan for now) Test: Freebird, Gregory, CaptMorgan and 8 others 11 Dusan Currently building: HMS Winchelsea 1764 by westwood - 1:48 Revenge 1577 - by westwood - 1:64 In preparation: Fourth-rate ship 1681 - 1:48
Oldsalt1950 Posted April 17, 2022 #56 Posted April 17, 2022 Dusan, looks great. Planking is spot on. I am looking forward to watching the rest of your build. Happy Easter Jim FrankWouts 1 Current Build: Fair American - Model Shipways Awaiting Parts - Rattlesnake On the Shelf - English Pinnace 18Th Century Longboat I stand firmly against piracy!
scrubbyj427 Posted April 17, 2022 #57 Posted April 17, 2022 That looks really good, I think the dye is a much better way to go than black paint. I will definitely be using that next time. FrankWouts 1 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship
glbarlow Posted April 17, 2022 #58 Posted April 17, 2022 Your build is looking great! I might suggest you consider a matte or even satin finish, the high gloss of the liquid wax might be a bit much on a model as large as Winchelsea. Just a thought. FrankWouts, Ryland Craze, Saburo and 3 others 6 Regards, Glenn Current Build: Royal Barge, Medway Long Boat Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose
westwood Posted May 15, 2022 Author #59 Posted May 15, 2022 Hey guys, I haven't made a post in a long time because all my energy has been directed towards planking... reply to the wax, in that one photo it's freshly applied and it gives the look of gloss. I also prefer a matte or satin look. But this point is still too far, I can't wax continuously otherwise I wouldn't be able to glue on the waxed surface anymore and that's a bit of a disadvantage compared to wipe on poly. So I finished the first belt, this is what it looks like Edwardkenway, Freebird, Saburo and 1 other 4 Dusan Currently building: HMS Winchelsea 1764 by westwood - 1:48 Revenge 1577 - by westwood - 1:64 In preparation: Fourth-rate ship 1681 - 1:48
westwood Posted May 15, 2022 Author #60 Posted May 15, 2022 Linning off the Hull ... the second part to check out Edwardkenway, FrankWouts, glbarlow and 3 others 6 Dusan Currently building: HMS Winchelsea 1764 by westwood - 1:48 Revenge 1577 - by westwood - 1:64 In preparation: Fourth-rate ship 1681 - 1:48
Recommended Posts