Jump to content

1966 Buick Riviera by CDW - FINISHED - AMT - 1:25 Scale


Recommended Posts

1 minute ago, king derelict said:

Thanks Craig

Blackening the tip of the scalpel blade is a good idea. I must remember that.

Alan

It's particularly useful when you are trying to do careful trimming of a silver object. A silver blade against a silver object is very hard to see. Simply blacken the blade tip with a sharpie marker and you'll see the blade 100% better. Works like magic.

Link to comment
Share on other sites

I'll have to remember that tip, too. 👍

Those wipers are light years beyond the kit blobs. Very nice.

Ken

Started: MS Bounty Longboat,

On Hold:  Heinkel USS Choctaw paper

Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1

Scratchbuild: Echo Cross Section

 

Member Nautical Research Guild

Link to comment
Share on other sites

Sweet work on the foiling!!  Amazing job!  

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32  Eduard Sikorsky JRS-1 1/72  IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

1 hour ago, gsdpic said:

Nice work on the chrome foil.  Do you just depend on the adhesive on the foil or do you do something more to ensure it stays where you put it?

Only the adhesive on the foil. It’s not easy to move at all. I suppose too much handling along the edges could cause it to lift but if it’s burnished down well, that chance is minimized as well.

Link to comment
Share on other sites

Looks fantastic Craig!  

 

Did you foil the bumpers and wheels, or did you paint them?  I'm sorta at a standstill on a car build because I was thinking of foiling one set of parts because it would be easier than painting, but then didn't want the chrome to look different from other places that were chromed.  So, I've always wondered what people that foiled certain chrome parts did with other chrome parts.

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32  Eduard Sikorsky JRS-1 1/72  IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

1 hour ago, Landlubber Mike said:

Looks fantastic Craig!  

 

Did you foil the bumpers and wheels, or did you paint them?  I'm sorta at a standstill on a car build because I was thinking of foiling one set of parts because it would be easier than painting, but then didn't want the chrome to look different from other places that were chromed.  So, I've always wondered what people that foiled certain chrome parts did with other chrome parts.

The bumpers and wheels are kit supplied chrome parts. I cannot imagine foil being a practical matter for either of those parts. 
I can tell you, high level competition judges will not deduct points for a mix of foil and kit chrome parts. They look close enough to the same to 99% of observers. The only way I can think of to have everything match would be to mask and paint all of it. I have worked most of my life with old cars and I can tell you for certain that body trim and chromed bumpers (and wheels) do not look the same held side by side. Much of the trim pieces were stainless steel not chrome.

Link to comment
Share on other sites

1 hour ago, CDW said:

The bumpers and wheels are kit supplied chrome parts. I cannot imagine foil being a practical matter for either of those parts. 
I can tell you, high level competition judges will not deduct points for a mix of foil and kit chrome parts. They look close enough to the same to 99% of observers. The only way I can think of to have everything match would be to mask and paint all of it. I have worked most of my life with old cars and I can tell you for certain that body trim and chromed bumpers (and wheels) do not look the same held side by side. Much of the trim pieces were stainless steel not chrome.

Good to know.  Sounds like I was overthinking things :)

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32  Eduard Sikorsky JRS-1 1/72  IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

Fantastic result, it reflects light like a real car.

You are dragging me more and more into car modeling, Craig.

Cheers,

Dan

Current build : Mayflower - AL 1:64

Completed non-ship builds : Spitfire MK I - 1:48Arado 196B - 1:32, Sea Fury - 1:48F-15C Eagle - 1:48Hawker Tempest Mk.V - 1:48F104S Starfighter - 1:48

 

"The most effective way to do it, is to do it" - Amelia Earhart

Link to comment
Share on other sites

That is looking so nice  Craig.

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

2 hours ago, CDW said:

I can tell you for certain that body trim and chromed bumpers (and wheels) do not look the same held side by side.

A lot of the mid 70's GM products were brushed or polished sheet aluminum alloys.... Sometimes they shined like chrome off the assembly line, but they didn't stay that way for long....

Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale

In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale

Completed: M8A1 HST  1930 Packard Boattail Speedster  M1A1 75mm Pack Howitzer  F-4J Phantom II Bell H-13's P-51B/C

Temporary Suspension: USS Gwin DD-433  F-104C Starfighter "Blue Jay Four" 1/32nd Scale

Terminated Build: F-104C Starfighter

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Quote:

"Relish Today, Ketchup Tomorrow"

Link to comment
Share on other sites

Link to comment
Share on other sites

Check this  out   -    Body kits  for  Smart Cars  -

https://www.matthewhaeck.com/smart-car-body-kits/

 

OC.

smorsche.jpg

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

7 hours ago, Old Collingwood said:

Check this  out   -    Body kits  for  Smart Cars  -

No matter how hard they try, they just can't turn a potato into a race car...

Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale

In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale

Completed: M8A1 HST  1930 Packard Boattail Speedster  M1A1 75mm Pack Howitzer  F-4J Phantom II Bell H-13's P-51B/C

Temporary Suspension: USS Gwin DD-433  F-104C Starfighter "Blue Jay Four" 1/32nd Scale

Terminated Build: F-104C Starfighter

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Quote:

"Relish Today, Ketchup Tomorrow"

Link to comment
Share on other sites

1 hour ago, Egilman said:

No matter how hard they try, they just can't turn a potato into a race car...

I thought it was a coffin ! 

Link to comment
Share on other sites

3 hours ago, Canute said:

Rode in one, once. Just about rattled my fillings out.

Got in one at dealership,  didn’t even bother to put key in ignition,  got right back out. Too claustrophobic!  

 

Good side is if you're in a fatal car accident, you won't need the added expense of a casket. Just load the car on a flatbed, drive to Cemetery,  dig a hole and drop you and car in, place a headstone that reads "Here lies Joe and his Smart Car" 

Edited by Jack12477
Link to comment
Share on other sites

Link to comment
Share on other sites

Craig, your work is always impressive. This is another beauty.  👍

Ken

Started: MS Bounty Longboat,

On Hold:  Heinkel USS Choctaw paper

Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1

Scratchbuild: Echo Cross Section

 

Member Nautical Research Guild

Link to comment
Share on other sites

Superb  job  Craig  -  looks  the  real deal.

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...