HMS Harpy 1796 by Blue Ensign – Vanguard Models - 1:64 scale

[SaltyScot]

Nice workmanship, sir. I enjoy dropping by and seeing this.

[Blue Ensign]

Post 49

Roof boarding

The painted roof boards look attractive, but I suspect in reality they would have been tarred or sheathed in lead to prevent water ingress particularly for the starboard side Pantry.

I have decided to Lead the boarding as a contrast to the paintwork.

0656

The lead foil is patinated using Pewter Patination fluid following a dip in white vinegar.

0657

I trimmed the  boards a little to reduce the overhang at the front and longside.

0653

It proved quite tricky to secure the roof  and I had to get inventive with a clamping arrangement.

I did pre-bend the boards before gluing using pva. I didn’t want to use Cyano in case any got on the paintwork or lead.

0661

0664

It is useful at this point to check the fit of the stern davits that sit atop the capping rail.

 

While I was waiting for glue to dry I had a play around with naming Harpy.

The kit doesn’t include lettering for the stern, and it’s debateable whether these Brigs even had name plates.

0654

However, that’s no reason not to have a look; I used 5mm  stick on vinyl lettering  in the only practical place on the transom.

I do rather like a name on the stern even if it stretches credulity.

I’ll ponder it a while, but application of the name is best done before the outer transom piece is glued into place.

 

B.E.

05/03/2025

 

[Blue Ensign]

Post 50

Fitting out continues

Looking at the stern area.

Overall I found this section difficult to get how I wanted it, and several dry fits, re-fits and decontructions were involved.

Stern board

This a tricky part to attach as it is awkward to clamp whilst ensuring the part is properly aligned.

0668

Again, I had to get inventive to secure the board in place.

0670

Having most of it glued, I separately re-clamped the lower quarter corners which were the most difficult to conform to the stern.

0672

0680

Finally, the Capping rail to the Tafferal is glued into place. The Aft davits were used to ensure alignment.

 

Quarter pieces

These are represented by a two layer arrangement so that the finished look is of the Lower Quarter piece extending down to the Square tuck.

0675

I spent a fair bit of time fiddling with the set-up for these, and once fitted I thought they could use some beefing up on the aft side where they meet the lower counter and  the wale.

0691

An afternoon of tweaking to arrive at a look I was happy with.

 

The kit differs slightly from the Adm plans.

0696

0705

The kit has stern davits  with a crutch for the Boom placed centrally on the tafferal.

0706

The kit usefully includes laser cut patterns for the sheaves both top and bottom. They need to be carefully drilled thro’ (0.6mm drill) from both sides.

The Adm plan  does not show davits, instead the counter timbers are extended above the rails to provide port and starboard boom crutches.

It is more than likely that during her long career Harpy would have been fitted with stern davits, and for a model they do provide a feature of interest, particularly when fitted with one of the sweet little cutters supplied with the kit.

 

Waist rails

0682

Chris has designed a ‘string’ of rails that fit seamlessly between the ports. Finely cut with a  central groove to represent a moulding they are easy to attach using spots of cyano.

I had thought of making my own, scribing a profile, but I didn’t think I could get down to scale size, and the kit ones look fine to me, given the size and class of the vessel.

 

B.E.

08/03/2025

[chris watton]

I have little doubt vessels of this size were fitted with stern davits, and even later, quarter davits, especially one such as Harpy, which had such a long career spanning both the French Revolutionary and Napoleonic Wars - wartime modifications would have come thick and fast, I think.

 

I got the inspiration for stern davits from a painting depicting Harpy and the ship sloop Fairy (Swan Class?) engaging the French Frigate Le Pallas off St Malo in 1800.

[Blue Ensign]

Don't  know about you Chris but I struggle to relate that painting of Harpy to the Adm Plans. but that doesn't  negate the use of stern davits on Brigs of the period.

There seems to be a lot of freeboard above the Gunports on that painting.

 

I like the look of your Harpy much better.

 

Cheers,

 

B.E.

[SaltyScot]

Builds like this inspire me. I am a lot slower keeping up with the maritime vernacular, me being a newbie and all, but some of it is beginning to become familiar