Alex M Posted October 25, 2013 #31 Posted October 25, 2013 Hi Gianpiero, What for impressive work! Very good done! I will follow with interest. Alex Quote Current build: HMS Sphynx, 20 gun ship launched in 1775 at Portsmouth, Hampshire. On the drawing board: HMS Anson, 64 gun third rate ship of the line, launched in 1781 at Plymouth
Mirabell61 Posted October 25, 2013 #32 Posted October 25, 2013 Hi Giampiero thanks for sharing your fabulous Model, very neat and accurate work, from the state it is already presenting, it shall certainly grow to a spectacular Piece of model art Nils Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
mtaylor Posted October 26, 2013 #33 Posted October 26, 2013 Giampiero, Beautiful joinery on the bow, stern, and frames. I'm going to follow along on your build and try to learn. Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
giampieroricci Posted November 1, 2013 Author #34 Posted November 1, 2013 Thank you, friends! Slowly the work going on, I started the construction of the transom: of course is yet to block and finish, especially the two stern oar that for security (or insecurity) I made them abundant NMBROOK, tarbrush, Rudolf and 11 others 14 Quote
WackoWolf Posted November 1, 2013 #35 Posted November 1, 2013 Excellent planking work. Keep the pictures coming. Love the detail. Quote Wacko Joe Go MSW :)
giampieroricci Posted November 2, 2013 Author #36 Posted November 2, 2013 (edited) Thank you!!!....... In order to block the stern oar in a more stable manner, on the excesses of the oarlocks I have tentatively set a provisional "crowning glory" that I will take away when I have completed the transom Edited November 2, 2013 by giampieroricci Bluto 1790, PeteB, SailorGreg and 9 others 12 Quote
giampieroricci Posted November 3, 2013 Author #37 Posted November 3, 2013 I placed the planking of the bottom of the transom, must, I think, before tightening the belts. archjofo, tarbrush, PeteB and 13 others 16 Quote
archjofo Posted November 9, 2013 #38 Posted November 9, 2013 Hello Giampiero, this is an excellent work. I'm very impressed. Quote Best regards Johann Video: La Créole - Scale 1/48, French corvette of 1827 - naval artillery La Créole - Scale 1/48, French corvette - Construction of long boat La Créole - Scale 1/48, French corvette - Construction of the masts La Créole - Scale 1/48, French corvette - 2019 La Créole - Scale 1/48, French corvette - standing rigging - part 1 La Créole - Scale 1/48, French corvette - standing rigging - part 2 La Créole - Scale 1/48, French corvette - standing rigging - part 3 See also our german forum for Sailing Ship Modeling and History: www.segelschiffsmodellbau.com
giampieroricci Posted November 16, 2013 Author #39 Posted November 16, 2013 I started fixing belts Wishmaster, mtaylor, avsjerome2003 and 14 others 17 Quote
giampieroricci Posted November 16, 2013 Author #40 Posted November 16, 2013 other photos PeteB, avsjerome2003, Wishmaster and 11 others 14 Quote
giampieroricci Posted November 17, 2013 Author #41 Posted November 17, 2013 (edited) after removing the clamps here is the result on the right side Edited November 17, 2013 by giampieroricci Archi, druxey, Bluto 1790 and 13 others 15 1 Quote
AntonyUK Posted November 17, 2013 #42 Posted November 17, 2013 Hello. I have just read your build log. And I am very impressed with you skill and the model. That is a very nice looking forum/shape of the hull. Well done on such a fine ship. Regards Antony. popash42 1 Quote Best advice ever given to me."If you don't know ..Just ask. Completed Mayflower Completed Fun build Tail boat Tailboat Completed Build Chinese Junk Chinese Pirate Junk Completed scratch built Korean Turtle ship 1/32 Turtle ship Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia On hold. Bounty Occre 1/45 Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section Completed H.M.S. Victory X section by Coral. HMS Victory cross section Completed The Black Pearl fun build Black Queen Completed A large scale Victory cross section 1/36 Victory Cross Section
giampieroricci Posted November 17, 2013 Author #43 Posted November 17, 2013 Thank you, Antony!... Quote
Mirabell61 Posted November 17, 2013 #45 Posted November 17, 2013 beautifull build Giampiero the impessive line of that ship can clearly be seen, wonderfull Nils Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
mtaylor Posted November 18, 2013 #46 Posted November 18, 2013 Is that ebony or dyed wood, Giampiero. Very impressive work. Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
giampieroricci Posted November 20, 2013 Author #47 Posted November 20, 2013 Thank you, friends! the belts are made of ebony, a wood so hard, so delicate and so mangy to work but so beautiful to see! mtaylor 1 Quote
mij Posted November 20, 2013 #48 Posted November 20, 2013 Hi Gianpiero Very nice model and great workmamship. mij giampieroricci 1 Quote xebec 1:60 scale, scratch build
giampieroricci Posted November 23, 2013 Author #49 Posted November 23, 2013 Today I continued to work pasting the strip between the two belts DmitriyMarkov, dnputnam, dgbot and 13 others 16 Quote
giampieroricci Posted November 24, 2013 Author #50 Posted November 24, 2013 I thought maybe it would be appropriate to bolt the course of filling at least now that there is still no upper boundary for more space and avoid any awkward shot could damage the belts themselves.This is the job I started.I used the brass tacks of a diameter of 0.7 mm which I cut his head off and filed flush with the stem of the course. hexnut, mtaylor, popash42 and 5 others 8 Quote
giampieroricci Posted November 30, 2013 Author #51 Posted November 30, 2013 I also positioned the second belt on the left side Landlubber Mike, avsjerome2003, Wishmaster and 10 others 13 Quote
giampieroricci Posted December 1, 2013 Author #52 Posted December 1, 2013 (edited) I have finished the belt of the left side The second belt on the right side Edited September 14, 2014 by giampieroricci DmitriyMarkov, Bluto 1790, NMBROOK and 12 others 15 Quote
giampieroricci Posted December 8, 2013 Author #53 Posted December 8, 2013 I finished the work on the belts, I started the long process of equalization of the interior of the coasts, and if it was tough on the outside, inside it is even more! dgbot, Bluto 1790, PeteB and 12 others 14 1 Quote
Sailor1234567890 Posted December 9, 2013 #54 Posted December 9, 2013 Very cool. Look forward to seeing her progress. Quote
ronkh Posted December 9, 2013 #55 Posted December 9, 2013 Hi Giam. Can you tell me how you managed to bend the ebony without it splitting/breaking please? Do you soak it, heat it? I have tried in the past and just ended up with a lot of scrap wood, a bad temper and then ending up staining some wood to simulate ebony! Not the result I wanted. Kind regards, Ron. Quote
Bruno Siljeg Posted December 9, 2013 #56 Posted December 9, 2013 Hello Giampiero very nice,I like it, how long this your ship... Quote
giampieroricci Posted December 9, 2013 Author #57 Posted December 9, 2013 (edited) thank you friends! I managed to bend the ebony with the flame of a candle, and then I put in a suitable form.however, they are strips of 2mm that I bent just enough to paste them on the model. The curvature of this model is not excessive. My ship is about a meter long...... Edited December 9, 2013 by giampieroricci Quote
ChrisLBren Posted December 9, 2013 #58 Posted December 9, 2013 Looks gorgeous - I don't have the patience to bend Ebony - nice work ! Quote
ronkh Posted December 9, 2013 #59 Posted December 9, 2013 (edited) Ah, I see what you mean and thank you for the quick reply Giam. (Or at least I think I understand: Do you "oscilate"" the wood over the flame of the candle while holding between thumbs and fingers and gently bending said wood over the heat)? And can I call you Giam?? Ron. Edited December 9, 2013 by ronkh Quote
giampieroricci Posted December 9, 2013 Author #60 Posted December 9, 2013 yes! of course! Thank you to see my work! ChrisLBren 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.