ca.shipwright Posted July 10, 2017 Share #211 Posted July 10, 2017 You have raised the bar to a place to which I can only aspire. You log is a tremendous resource on which I will surely rely upon as I go down this journey even though I am building the Panart 738 kit. Regards clearway 1 Quote ca.shipwright Michael Zemmel Midlothian. VA http://modelshipworld.com/index.php/topic/11562-hmb-endeavour-by-cashipwright-corel-160/ http://modelshipworld.com/index.php/topic/15329-hms-victory-by-cashipwright-panart-art-738-1:78/ "Buy all your toys before you retire" Link to comment Share on other sites More sharing options...
clearway Posted July 16, 2017 Author Share #212 Posted July 16, 2017 Thanks for the views, likes and comments all- it does help. Billings just used an eyebolt to hold the jeers in place, so fashioned some cleats from some walnut left over from another kit (never throw anything away) and pinned them using bamboo dowel fashioned from a cocktail stick. also added cleats to the bases of the fore and main masts for the trusses- these are old billing ones from the spares box. Started painting the yellow on the mizzen and gave the fore and main the first of two black priming coats a well as tapering the mizzen gaff and boom. Have fun all and keep up the good work everyone. Keith BenD, coxswain and Steve 12345 3 Quote Link to comment Share on other sites More sharing options...
ca.shipwright Posted July 17, 2017 Share #213 Posted July 17, 2017 Keith, Keeps looking better and better. Very nice work indeed! Regards clearway 1 Quote ca.shipwright Michael Zemmel Midlothian. VA http://modelshipworld.com/index.php/topic/11562-hmb-endeavour-by-cashipwright-corel-160/ http://modelshipworld.com/index.php/topic/15329-hms-victory-by-cashipwright-panart-art-738-1:78/ "Buy all your toys before you retire" Link to comment Share on other sites More sharing options...
clearway Posted July 23, 2017 Author Share #214 Posted July 23, 2017 Thanks again for the visits to my log and the kind comments. Not had much time in ye olde ship yard due to visitors. The main and fore masts need one more coat of yellow and that will be the lower masts painted up. Obtained the caldercraft victory boats set, but being at 1/72 scale they are a bit of a squeeze on the skids so not sure if i will use them all. The tretletrees in the pic with the boats are made from bamboo obtained from them beefburger skewers which will replace the kit ply ones which are a bit fragile- not sure if bamboo is right wood to use? as always take care and have fun all. Keith CaptainSteve, zappto and Steve 12345 3 Quote Link to comment Share on other sites More sharing options...
clearway Posted July 30, 2017 Author Share #215 Posted July 30, 2017 Hi again all, thank for the views and likes everyone, painted the deadeyes with the help of magic hands and a length of brass wire. Also couldn't get away with the replacement bamboo cross trees so delved back into my pile of walnut offcuts. then time to get messy and break out the india ink to start dying the thread for the shrouds- great fun with oodles of mess- like being back in art class at school!!. Take care and happy modelling all. Keith Steve 12345 1 Quote Link to comment Share on other sites More sharing options...
clearway Posted August 6, 2017 Author Share #216 Posted August 6, 2017 thanks for looking in everyone- been a nawty boy and bought the caldercraft HM bark Endeavour and billings marie jeanne- my bucket list o ships is nearly complete- just gotta build em . not much to report this week- got the deadeyes in place on the mizzen top for the futtock shrouds (not exactly as per real practice but once painted should pass muster) and got the trestle trees and mast caps glued in place on the topmasts. take care all and have fun. Keith CaptainSteve 1 Quote Link to comment Share on other sites More sharing options...
clearway Posted August 27, 2017 Author Share #217 Posted August 27, 2017 Hi again all, after a couple of weekends D.I.Y. refurbing the bedroom walk in cupboard (feel like harry potter now)! its back to my Vicky. Finished soldering up the strops on the futtock deadeyes, and used a couple of pieces of hawthorn to make the jaws on the driver boom and gaff boom (billings just had a couple of laser cut semicircles of ply). Also after starting to make up the plywood anchors i decided to replace them with caldercraft whitemetal anchors with walnut stocks. till later- take care all and thanks for viewing. Keith Zarkon, CaptainSteve, petervisser and 1 other 4 Quote Link to comment Share on other sites More sharing options...
clearway Posted September 3, 2017 Author Share #218 Posted September 3, 2017 Hi all- thanks again for dropping in and the views/ likes. Work continues on the masts. Had started to paint the doubling on the topmasts when i realised i hadn't attached the sheaves for the forestays so sanded back and sorted them using the kit supplied laser cut ones (luckily the masts are only held together using fids so easy to dismantle). Also used an off cut of walnut dowel for the dolphin striker and secured it with three brass u shaped staples- while i had some epoxy mixed i also glued the bills onto the caldercraft anchors. I sanded the jaws on the gaff and driver booms to final shape after drilling and gluing a couple of treenails into each one. take care all Keith gieb8688, CaptainSteve and BenD 3 Quote Link to comment Share on other sites More sharing options...
clearway Posted September 10, 2017 Author Share #219 Posted September 10, 2017 Hi again all, not been upto much this week though i did finish painting and varnishing the masts, also applied the first coat of black to the replacement anchors. take care all, and thanks for looking in. Keith gieb8688 and CaptainSteve 2 Quote Link to comment Share on other sites More sharing options...
clearway Posted October 11, 2017 Author Share #220 Posted October 11, 2017 Hi all- and so the rigging finally begins! Also fastened the rudder chain in place. Havn't permanently fastened the halliards for the deadeyes in place yet to allow for any adjustment needed. I am using James lees and Longridge for reference as the billings rigging instructions are shall we say a bit vague! Thanks for popping in and take care all. Keith Erik H, petervisser, django56 and 3 others 6 Quote Link to comment Share on other sites More sharing options...
zappto Posted October 12, 2017 Share #221 Posted October 12, 2017 This is nice to see big lady come alive, it is pretty ship you make! What type off varnish do you use? it is glossy? clearway 1 Quote Current build: Mamoli - La gloire 1778 Finished builds: Mamoli - Friesland 1663 Mamoli - Lexington 1776 Link to comment Share on other sites More sharing options...
clearway Posted October 12, 2017 Author Share #222 Posted October 12, 2017 Ty Zappto- the varnish is matt acrylic varnish- i think the flash from the camera "glossed" it up a bit. Keith Quote Link to comment Share on other sites More sharing options...
clearway Posted October 22, 2017 Author Share #223 Posted October 22, 2017 thanks for popping in to have a look all. Ah the glorious controlled chaos of rigging (at least when i do it). only the mizzen stay, preventer stay, topmast stay, and futtock shrouds are permanently glued in place the other mizzen shrouds still need gluing. Once the main shrouds are rigged i will need to think about fixing the foremast and bowsprit in place ready for rigging the mainstay (the stay rigged to the main at the moment just being temporary. til later- have fun all. Keith gieb8688 and CaptainSteve 2 Quote Link to comment Share on other sites More sharing options...
Bill Morrison Posted October 22, 2017 Share #224 Posted October 22, 2017 What an excellent job so far! I am most impressed! Bill clearway 1 Quote Link to comment Share on other sites More sharing options...
clearway Posted October 29, 2017 Author Share #225 Posted October 29, 2017 Thanks for the comments, likes and views as always everyone. Main shrouds rigged and start made on main stay and preventer stay. Bowsprit gammoning in place as well as the rope for the main stay heart. The foremast and marines catwalk still to be permanently attached (need to fasten the blocks under the foretop for the sprits'l yard and topyard. take care all. Keith CaptainSteve, Old Collingwood and Moab 3 Quote Link to comment Share on other sites More sharing options...
clearway Posted November 19, 2017 Author Share #226 Posted November 19, 2017 Hi all and thanks as always for the views and likes everyone. Now have the main stay and preventer stay rigged and the ropes for the main futtock shrouds and topmast shrouds in place along with the topmast stay and preventer stay. have fun as always folks (yikes only 5 mondays till you now what!) Keith Erik H, gieb8688, cristikc and 3 others 6 Quote Link to comment Share on other sites More sharing options...
ca.shipwright Posted November 20, 2017 Share #227 Posted November 20, 2017 Very nice done. Keep up the good work. Regards clearway 1 Quote ca.shipwright Michael Zemmel Midlothian. VA http://modelshipworld.com/index.php/topic/11562-hmb-endeavour-by-cashipwright-corel-160/ http://modelshipworld.com/index.php/topic/15329-hms-victory-by-cashipwright-panart-art-738-1:78/ "Buy all your toys before you retire" Link to comment Share on other sites More sharing options...
clearway Posted November 21, 2017 Author Share #228 Posted November 21, 2017 ty michael- you too Keith Quote Link to comment Share on other sites More sharing options...
clearway Posted November 26, 2017 Author Share #229 Posted November 26, 2017 thanks for the views lies and comments everyone Rigging moving onwards and forwards. the main futtocks rigged and the main top shrouds now needing adjusted and tied off along with the main topstay and preventer stay. fore shrouds started along with temp forestay- really need to think about rigging bobstays and shrouds on bowsprit and finishing the jibstay. take care all. Keith CaptainSteve, etubino, gieb8688 and 1 other 4 Quote Link to comment Share on other sites More sharing options...
clearway Posted December 4, 2017 Author Share #230 Posted December 4, 2017 Thanks for the views all-the joy continues! started on the ratlines then i can start on breast/ backstays on the main mast. Only two more mondays left til the big day!! Keith gieb8688 and Moab 2 Quote Link to comment Share on other sites More sharing options...
clearway Posted December 22, 2017 Author Share #231 Posted December 22, 2017 The ratlines continue! also the shrouds on the foremast are in place, but the deadeyes wont be rigged til i rig the snaking and the main stay and preventer stay are rigged. Once the ratlines are rigged on the main top shrouds and the breast/ backstays are in place. til later all have fun- three sleeps til santa! Keith gieb8688, etubino, zappto and 4 others 7 Quote Link to comment Share on other sites More sharing options...
JohnReid Posted January 30, 2018 Share #232 Posted January 30, 2018 Lookin' good Cheers! John. Quote Link to comment Share on other sites More sharing options...
shihawk Posted February 26, 2018 Share #233 Posted February 26, 2018 i,m glad to see u still at it , but u better hurry or i,ll beat u to it , stay away from the tanks . she really looks great . Boyd clearway 1 Quote HMS Victory by Shihawk. Billing 1-75 wood finish Link to comment Share on other sites More sharing options...
clearway Posted February 27, 2018 Author Share #234 Posted February 27, 2018 Cheers Boyd- was distracted by 1/35 german armour again over xmas! however have now made a start on the main topmast ratlines- scary how long we been plodding away with this one m8 Keith shihawk 1 Quote Link to comment Share on other sites More sharing options...
CaptainSteve Posted February 27, 2018 Share #235 Posted February 27, 2018 After spending some time reading thru your log, Keith, I am just about ready to give my first build (HMS Victory, Constructo) a viking burial and do it all over again with this kit. Stunning workmanship !! clearway 1 Quote CaptainSteve Current Build: HM Granado Bomb Vessel (Caldercraft) My BathTub: Queen Anne Barge (Syren Ship Models) Log: Queen Anne Barge (an build log) Bounty Launch (Model Shipways) Log: Bounty Launch by CaptainSteve Apostol Felipe (OcCre) HMS Victory (Constructo) Check It Out: The Kit-Basher's Guide to The Galaxy Website: The Life & Boats of CaptainSteve Link to comment Share on other sites More sharing options...
clearway Posted February 27, 2018 Author Share #236 Posted February 27, 2018 Ty Steve - though it is a beast and would be a bit wary if doing it as a first build- for a different look Boyds (shihawk) billings victory is also pretty good in the natural wood finish. Keith CaptainSteve, jeff watts and shihawk 3 Quote Link to comment Share on other sites More sharing options...
clearway Posted March 4, 2018 Author Share #237 Posted March 4, 2018 Thanks all for the views/ comments as always- rigged the main topmast ratlines, breast stays, backstays, and travelling backstays (though wont be rigged to the channels til most of the running rigging is in place). Also finished rigging the main topmast stay/ preventer stay, and made a start on the snaking on the mainstay/ preventer stay. have fun all and keep up the good work everyone. Keith CaptainSteve, etubino, shihawk and 1 other 4 Quote Link to comment Share on other sites More sharing options...
shihawk Posted March 4, 2018 Share #238 Posted March 4, 2018 You see thats what i mean about rigging ,even remembering all the different names gets me confused !!!! or are u like me and keep a book beside the computer ??? But seriously ,u seem to know what u are doin , and makin a great job of it too. clearway 1 Quote HMS Victory by Shihawk. Billing 1-75 wood finish Link to comment Share on other sites More sharing options...
clearway Posted March 5, 2018 Author Share #239 Posted March 5, 2018 Ty Boyd- i have always had an interest in ships and memorised all the names for various bits n bobs! Must admit in the middle of all this was thinking maybe Boyd has the right idea Keith shihawk 1 Quote Link to comment Share on other sites More sharing options...
clearway Posted March 11, 2018 Author Share #240 Posted March 11, 2018 Hi again all, got the fore shrouds rigged- also got blocks/ deadeyes/ thimbles on the main breast/ backstays attatched. Thanks for looking in everyone. Keith etubino, shipcarpenter, shihawk and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.