Jump to content

Deja Vu all over again....to copper or not to copper


Recommended Posts

Let's get this discussed again. I, personally, don't like the looks of a copper hull on a model (although Blue Ensign's Pickle caught my eye). Also, I love the look of wood on the hull. I realize by not coppering you are losing some authenticity.

 

What say you mates?

 

Link to comment
Share on other sites

Its very subjective.  I prefer different looks on different models.  I do believe its something everyone should try at least once.

 

I am moving this topic into the proper forum as well... :(

 

Chuck

Link to comment
Share on other sites

I really like the looks of a wood all over ship.  At the same time I am trying to be as authentic as possible while building  and to accomplish that some hulls have to be coppered to reflect the real ship.  So I guess the way to solve the dilemma is if you want a completely wooden ship, and be authentic too, build one from that era.

 

Having said that, there is (was) a model shown here before of the Constitution not coppered, an it was beautiful ;o)

 

As has been said many times here, "it's your ship, build it the way yo want to".

 

Tom

Edited by twintrow
Link to comment
Share on other sites

I had the good fortune to visit the New York Yacht Club a few months back.  The models there are spectacular and nary a one has a copper bottom using plate.  Those that are coppered are painted and looked great.   For warships copper bottoms do look more realistic, but for the dozens of racing yachts, mostly America's Cup winners and challengers, I like the look of the simulated bottom cover.  I tried this recently and am pleased with the look on a the yacht Thistle and now on the Fredonia fishing schooner Lettie G. Howard,( pics attached on the Lettie.)

 

Allan

 

 

post-42-0-47468900-1362313121.jpg

post-42-0-24598900-1362313138.jpg

PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series.   Click on http://trafalgar.tv   There is no cost other than the 30 seconds of your time.  THANK YOU

 

Link to comment
Share on other sites

I think it depends on the goal you are striving for (and yes I think everyone should try it at least once). If you are striving for an accurate replica of the vessel as it appeared at a specific time, and at that time it was coppered, then for the sake of accuracy it should be coppered. If, however, you are showcasing your abilities as a master planker (or whatever), then the option presents itself of foregoing the copper. But the most important caveat is simple: it's your build, do it as you see fit.

 

Andy

Quando Omni Flunkus, Moritati


Current Build:

USF Confederacy

 

 

Link to comment
Share on other sites

Hi Guys,

 

I agree with Andy's sentiments.

 

I used Zap-a-Gap to anchor my plates on my Aggy (see Avatar). What helped me greatly was that I noticed that if the bottle was lying on it's side, a small bead of glue would form at the tip of the nozzle. The development of this bead coincided very nicely with the rate that I could lift the plate in my tweezers, touch the reverse side of the plate on the nozzle and transfer it to the hull and press to secure. Once this operation was completed, sufficient adhesive had collected for immediate repetition of the cycle. Of course my system was slowed when I reached the gore lines and the boot topping and the plates needed to be "spiled" but the tedious work had been avoided. My kit came with 3000 plates and I had a reasonable number left over (perhaps some 200). Not a single plate came detached, then or since.

 

Richard

Link to comment
Share on other sites

I did my Constitution hull with copper plates. Whether I do another ship in copper is debatable. I may explore other options as I do like the look of natural wood.

Jeff

 

In progress:
Medway Longboat 1742 - Syren Ship Model Company -1/2" scale

USS Constitution - Model Shipways - Scale 1:76

HMS Granado - CAF Model - 1:48

HMS Sphinx - Vanguard

Link to comment
Share on other sites

This is one of those subjects with a very wide spectrum of varying opinions/preferences, but as the others have said, it all depends on what you prefer in your build.

 

 

If you still haven't made up your mind on what you prefer, then perhaps these three contemporary models (HMS Diana, HMS Minerva, and HMS Atalanta) can help you decide:

 

d4059_3.jpg

 

 

f9204-002.jpg

 

 

 

d4085_3.jpg

 

 

Oh, by the may, I think it's pretty obvious from these what type of hull I prefer, and if these are authentic enough for the National Maritime Museum and the Navy Board, then they are authentic enough for me   ;)

 

I do plan to do a copper plated ship, one of these days to gain the experience, but I will probably limit it the smallest ship I could find with less than 500 plates :D

Best regards,

Aldo

Currently Building:
HMS Pegasus (Victory Models)-Mothballed to give priority to Triton

 

HMS Triton (first attempt at scratchbuilding)

 

 


Past build:
HM Brig Badger (Caldercraft), HM Brig Cruizer, HM Schooner Ballahoo

Link to comment
Share on other sites

Of the three models I have built now - all CC only one has a coppered bottom, but in all honesty its doesnt worry me but I must say I really enjoyed the coppering stage of the build in my HMS Snake, if the model comes with it so be it, I'll put it on.

Norman

 

 

Current build Trumpeter Arizona 1:200 with White Ensign PE and a Nautilus Wooden Deck.

Built Caldercraft Convulsion, HM Brig Badger and HMS Snake.

Awaiting - Zvelda HMS Dreadnought planning to get the Pontos Deck and PE Upgrades, Panart 1:23 Gun deck model and couple of the cannon kits Manatu - French siege mortar, and American coastal cannon.

Link to comment
Share on other sites

If the ship is mostly, or all, painted the copper is very effective. If it is all wood, keep it woody.

Jay

 

Current build Cross Section USS Constitution  http://modelshipworld.com/index.php/topic/10120-cross-section-forward-area-of-the-uss-constitution/

Finished USS Constitution:  http://modelshipworld.com/index.php?/topic/103-uss-constitution-by-modeler12/

 

'A picture is worth a  . . . . .'      More is better . . . .

Link to comment
Share on other sites

I am just letting my Snake coppering tarnish slowly naturally, I have no intention of polishing the the copper. I cleaned it carefully when completed with a fine wire wool and a quick wipe with acetone just to ensure no fingerprints remained which would tarnish at a differing rate. Metal polish will leave residue typically a white powder in the joints that I have avoided.

Edited by normanh

Norman

 

 

Current build Trumpeter Arizona 1:200 with White Ensign PE and a Nautilus Wooden Deck.

Built Caldercraft Convulsion, HM Brig Badger and HMS Snake.

Awaiting - Zvelda HMS Dreadnought planning to get the Pontos Deck and PE Upgrades, Panart 1:23 Gun deck model and couple of the cannon kits Manatu - French siege mortar, and American coastal cannon.

Link to comment
Share on other sites

I have almost completed coppering my Phantom.  I like the look especially if viewed with the "5-foot" rule in mind, and will do so on any future models that call for it.  However, I do reserve the right to change my mind if the plans call for 1/4" X 1/8" plates.  Man those are small!

 

Jack

Edited by TexasJackTar
Link to comment
Share on other sites

If a kit comes with copper plates than I would and have coppered the hull. To me coppering the hull is no different from planking. I also feel that there is no substitute for the plated hull look. With that said the above models of the Diana, Minerva and Atalanta are  simply maganificent but they are builders models which I do not think were coppered. However if I were building a model of the Connie or Cutty Sark or any other model that I knew had a coppered hull I would copper it.

 

Mort

Current Build - Caldercraft Victory

 

Completed - Artesiana Latina Swift, Harvey, MGS Prince de Neufchatel, Imai USS Susquehanna, Mamoli Constitution, Rattlesnake per Hunt Practium, Caldercraft Snake, Diana, Kammerlander Duke William 

 

Waiting to be Launched -  Bluejacket Constitution

 

 

Proud member of The New Jersey Ship Model Society

Link to comment
Share on other sites

  • 4 weeks later...

a poorly coppered hull looks worse than a poorly planked hull, must be the scale thing, and not being able to touch up with a bit of filler.But like all my modeling skills practise makes perfect (well a little bit better in my case), i like to see a coppered hull

Link to comment
Share on other sites

  • 1 month later...

I was going to start a thread about this subject but lo and behold... search saves the day.

 

I suppose I am pretty far from worrying about this but my lustful heart is looking toward the next build, the HMS Diana from Caldercraft. Designed with a coppered hull and that gave me pause. Do I need to copper to do the ship justice? Will it pale because it's not authentic or was it coppered by Caldercraft and not in its real life? Can I cover good wood with copper plates? The wood worker in me says how can you???

 

It is true... my boat, my decisions ... but still I wondered... could I spend that $$ and not follow along with the design... until I saw rdsaplala's post in this thread... the natural wood shines through and it was a good enough example for me.

Now I can start saving the money and try not to think about that wonderful day when a brownish truck stops by and ... :blush:

Link to comment
Share on other sites

Hey Randy,

I think if you're not coppering - you might want to consider replacing the kit provided wood with some better quality wood (such as Cherry, Boxwood or Pear).  The beauty of those models is a large part due to the hardwood used and the finish applied - in my opinion. 

 

Good luck with your build,

Chris

Edited by ChrisLBren
Link to comment
Share on other sites

The solution is!

 

White anti fouling paint B)

 

But seriously do what you want, if the wooden planking job looks brilliant, keep it. If you think you could do better then go for the copper. 

Kits owned: Mamoli Royal Louis, Mamoli Friesland, Mamoli HMS Victory 1:90, Occre Santisima Trinidad, Constructo HMS Prince

Link to comment
Share on other sites

I don't have a lot of experience here as I am working my second model. Both models are painted and coppered which can cover a lot of flaws but I find I am more attracted to models that try to be histroical accurate as to those that are a piece of fine furniture. I do appreciate any person in any craft that can make wood tell a story so I do enjoy a ship that has finely crafted and well  finished wood. My next ship La Couronne will be done mainly to display the wood, minimal paint to see if I can do a good job. In the end I think it is a just matter of personal preference.

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...