mtaylor Posted November 23, 2015 #31 Posted November 23, 2015 Beautiful work, Alexandru. Everything is looking great. WackoWolf 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Mirabell61 Posted November 26, 2015 #32 Posted November 26, 2015 fantastic work Alexandru, Nils WackoWolf and mtaylor 2 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
Greg the peg leg sailor Posted November 26, 2015 #33 Posted November 26, 2015 G'day Alexandru Amazing skills that you have displayed! I'm for one is bloody jealous! Love your attention to details. Keep them coming mate please. Havagooday Greg Quote "Nothing is impossible, it's only what limitations that you put on yourself make it seems impossible! " Current log : The Royal Yacht Royal Caroline 1749 1:32 by Greg Ashwood:...
Jim Lad Posted November 26, 2015 #34 Posted November 26, 2015 Just catching up, Alexandru - everything looks up to your usual very high standard. John mtaylor and WackoWolf 2 Quote
WackoWolf Posted July 12, 2016 #35 Posted July 12, 2016 Just found this log of yours, never knew about it. Love your work. Do you have any more updates? mtaylor 1 Quote Wacko Joe Go MSW :)
guraus Posted July 12, 2016 Author #36 Posted July 12, 2016 Just found this log of yours, never knew about it. Love your work. Do you have any more updates? I might have just a few pictures I didn't posted yet as update for this build, but I will restart working on it soon and I will post as I go. I am planning to start by doing the three yards. Alexandru mtaylor, justsayrow, WackoWolf and 1 other 4 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune
WackoWolf Posted July 13, 2016 #37 Posted July 13, 2016 Thanks. Will be waiting for them. mtaylor 1 Quote Wacko Joe Go MSW :)
rwiederrich Posted July 13, 2016 #38 Posted July 13, 2016 Fantastic work...superior! I'm in awe. Rob mtaylor 1 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts."
guraus Posted July 15, 2016 Author #39 Posted July 15, 2016 These are the only picture I haven't posted yet on this project. Alexandru amateur, mtaylor, WackoWolf and 7 others 10 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune
justsayrow Posted July 15, 2016 #41 Posted July 15, 2016 It's a shame that one can only click "Like This" once! Beautiful work. WackoWolf, mtaylor and CaptainSteve 3 Quote ==================================== Currently building: Model Expo AMERICA, A/L KING OF THE MISSISSIPPI Completed: Mamoli Victory cross-section, Revell LSM (Plastic, in memory of Dad), A/L SANSON tug, MS Longboat (awesome model Chuck!), Dumas 1949 Chris-Craft 19' Racing runabout, A/L SWIFT, MS ELSIE, Constructo ELIDIR (now LOUISE), Midwest Muscongus Bay Lobster Smack, Amati 1:80 Yacht ENDEAVOUR, Mamoli CONSTITUTION cross section, Revell VIIc U-boat (1:72 plastic), lotsa other plastic ships Next up: who knows - there are too many to choose from!
dafi Posted July 16, 2016 #42 Posted July 16, 2016 Dear Alexandru, most wonderful work as usual, thank you for sharing!!! Only the blocks underneath the tops surprise me, the look like the ones one can buy and do not have the typical more roundish appearance. XXXDAn WackoWolf and mtaylor 2 Quote To victory and beyond! http://modelshipworld.com/index.php?/topic/76-hms-victory-by-dafi-to-victory-and-beyond/ See also our german forum for Sailing Ship Modeling and History: http://www.segelschiffsmodellbau.com/ Finest etch parts for HMS Victory 1:100 (Heller Kit), USS Constitution 1:96 (Revell) and other useful bits. http://dafinismus.de/index_en.html
guraus Posted August 4, 2016 Author #43 Posted August 4, 2016 (edited) Hello all, Here is another update on this project: build the main yard and installed the top and royal masts. For some reason the pictures which I uploaded in the right order are showing all mixed up... Regards Alexandru Edited August 4, 2016 by guraus Dubz, WackoWolf, justsayrow and 16 others 19 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune
guraus Posted August 16, 2016 Author #44 Posted August 16, 2016 Another update on this project. Alexandru tadheus, tlevine, Seventynet and 18 others 21 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune
WackoWolf Posted August 17, 2016 #45 Posted August 17, 2016 Excellent, just beautiful. I can't really think of any other words to describe your detail work. The rigging is out of this world. mtaylor, Captain Poison and Mirabell61 3 Quote Wacko Joe Go MSW :)
guraus Posted September 9, 2016 Author #46 Posted September 9, 2016 This small project is almost done. Here are some more progress pictures. There are two things I don't really know how to solve so maybe someone can give me some ideas: 1. How to coil the rope from the gun tackles on the deck - those rope spirals? 2. How to make a flag and from what to hang at the top of the mast? Any suggestions or ideas would be greatly appreciated. Regards, Alexandru jose_b, FatFingers, Mirabell61 and 14 others 17 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune
mtaylor Posted September 10, 2016 #47 Posted September 10, 2016 Hi Alexandru, I'll try to answer but others maybe have better ideas than I do. 1. How to coil the rope from the gun tackles on the deck - those rope spirals? a)Take the fall from the gun tackle and spot glue the end to the deck where you want the coil. b)Then take a piece of double sided tape and stick to your workspace (not the deck). c) Carefully coil the rope on the tape. The tape will hold it in place. d) Brush the coil with a 50-50 mix of water and white glue. Allow to dry. e) Carefully remove the coil from the tape. It takes some practice as the coils are fragile and come undone easily. f) Glue the coil to the deck over the end of the tackle fall. 2. How to make a flag and from what to hang at the top of the mast? What I've done is use a drawing program and make the flag on the computer. Copy and flip it over. Take a piece of silkspan (the paper the flying models airplane guys use) and tape it to piece of cardstock. Mark the silkspan and the cardstock as you'll need to flip the silkspan over. Print the first side of the flag. Flip the silkspan and retape paying attention to the marks. Print the other side using the flipped image you created earlier. It will take some practice to get each side of the flag lined up. Do not use a color laser printer but a color inkjet type printer. When printed, spray the flag with some artist's fixative. When dry, you can bend, twist, etc. to shape. I hope this helps. I'm also hoping someone has an easier way. Robin Lous and WackoWolf 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
guraus Posted September 11, 2016 Author #48 Posted September 11, 2016 (edited) Thanks a lot Mark, I will give a shot to the rope coiling method you describe for sure. For the flag I need to find a inkjet color printer - only have a laser one. Alexandru Edited September 11, 2016 by guraus WackoWolf and mtaylor 2 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune
rdestefano01 Posted September 12, 2016 #49 Posted September 12, 2016 What a build! Can I ask how you put the stairway in if the base is solid maple. mtaylor and WackoWolf 2 Quote
guraus Posted September 14, 2016 Author #50 Posted September 14, 2016 Hello, The stairway was an afterthought. Initially I planned to just paint black the corresponding opening but then - quite late in the process of building the base - I changed my mind and added it as you can see in the below pictures. To do it, I just dril a lot of holes with a 1/4in bit inside the rectangle delimited by the hatch coamings. Then with a big file and a lot of effort while trying not to damage what was already done I made the hole sides nice and smooth. The sides were painted black and the stair was added in. If you want to know how I actually did the stair, let me know as I have pictures on that process also and I can post them. Regards, Alexandru Dubz, WackoWolf, gjdale and 8 others 11 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune
WackoWolf Posted September 15, 2016 #51 Posted September 15, 2016 If you can post the pictures of how you did the stairs. Thank you mtaylor 1 Quote Wacko Joe Go MSW :)
dafi Posted September 15, 2016 #52 Posted September 15, 2016 Wonderful as usual! XXXDan mtaylor 1 Quote To victory and beyond! http://modelshipworld.com/index.php?/topic/76-hms-victory-by-dafi-to-victory-and-beyond/ See also our german forum for Sailing Ship Modeling and History: http://www.segelschiffsmodellbau.com/ Finest etch parts for HMS Victory 1:100 (Heller Kit), USS Constitution 1:96 (Revell) and other useful bits. http://dafinismus.de/index_en.html
guraus Posted September 15, 2016 Author #53 Posted September 15, 2016 I do not have pictures for the exact stairs in this model but I am doing them all the same way. Here are the pictures for several stairs I build. Alexandru albert, mtaylor, gjdale and 2 others 5 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune
WackoWolf Posted September 15, 2016 #54 Posted September 15, 2016 Thank you. mtaylor 1 Quote Wacko Joe Go MSW :)
Mirabell61 Posted September 15, 2016 #55 Posted September 15, 2016 awsome modeling Alexandru !! Your rigging looks top..... Nils mtaylor 1 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
Bgformula Posted September 15, 2016 #56 Posted September 15, 2016 Alexandru, I am not sure where the small project comes in but this is some incredible work. This type of work is done by a craftsman of the highest order. Beautiful.... I could look at these all day. WackoWolf and mtaylor 2 Quote
rdestefano01 Posted September 15, 2016 #57 Posted September 15, 2016 Thats so cool thanks! Wonder how tall it is at 1/48 scale. WackoWolf and mtaylor 2 Quote
guraus Posted September 17, 2016 Author #58 Posted September 17, 2016 Thats so cool thanks! Wonder how tall it is at 1/48 scale. It is 45in (115cm) tall. Taller and wider than I expected so now I am not really sure where to put it. And it will require quite a big case! Alexandru Stimpy, WackoWolf and mtaylor 3 Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.