-
Posts
583 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Posts posted by Ian B
-
-
Wow great first hand evidence..looks like the definitive answer...
- Old Collingwood, Canute and mtaylor
- 3
-
5 hours ago, hof00 said:
Hi All,
Small update:
A small update is better than none....
(I got the Bow/Stern "Air Recognition Markings" on.
This process worked o.k and I can now see the valur of Gloss Polyurethane as a "Grounding for the Decals.
I also rate the "Micro-Set."
The Decals are still drying and I may go over the Bow Decal with "Micro-Sol" later. (It depends on how the Decal dries over the raised Fore Deck areas.
I am reasonably happy with my efforts today and am preparing the Stern Hatches for installation hopefully tomorrow.
Initially, I liked the Deck without the Decals but am coming round to the idea that it adds a bit of color. 😀
Cheers....HOF.
Photos:
Looks fab....makes her look even more menacing...
- mtaylor, Canute, Old Collingwood and 1 other
- 4
-
8 hours ago, hof00 said:
Hi Ian,
From my understanding, the "Full Baltic Stripes, (Superstructure), were removed prior to May 21st and the Deck Markings Greyed out just after this as were the Hull Baltic Stripes leaving the Bow/Stern Waves and leaving just the White remnants of the Stripes on the Water Line.
I have not done enough research as yet to be 100% accurate.
(Joe100 is a superb source of information with respect to Bismarck.)
I guess they had many crew to paint things. 😀
Cheers and Regards,
Harry.
Thanks Harry
- mtaylor, Canute, Old Collingwood and 1 other
- 4
-
-
20 hours ago, James H said:
I would paint the swastika first, using masks, then add the hardware over it and paint.
BUT, Amati have supplied the kit with the last known iteration before it was sunk. At that time it had no swastikas. They were painted over.
Hi.. I am still confused about her markings, the AOS says it had them blanked out as per the instructions breaking out through the Denmark straights but had the markings and yellow roofs of the main turrets reapplied before the final show down..I can't see how they had time to repaint!
- Old Collingwood, mtaylor, Canute and 1 other
- 4
-
-
On 9/7/2022 at 7:58 PM, flyer said:
spanker
The spanker was laced to the gaff and the mast.
The finished model should depict a situation where light winds from the aft port quarter just ceased for a moment (I don't want to show the sails swelled up because I consider this rather difficult and additionally would mean Bellona couldn't be on an even keel). So gaff and boom are swung to starboard but the sail as well as parts of the rigging are hanging limp.
While belaying the various lines I found that although the belaying pins look a bit plump, the holes for them are still too large and the pins have a tendency to jump out and get lost. On former builds I could push them into the holes with a little force and they were just jammed tight. Diluted glue was necessary here to keep the pins in.
spanker set
sail laced to gaff and mast
spanker viewed from port and starboard
Hi I'm now doing my spanker...going to do it the same as you..yours look fab ..I hope mine turns out just as 👍👍👍
-
-
Hi Eric
Just joined your 'doesn't quite fit, what the heck!' build log
You're doing a great job and I am sure those that follow you in building the Cairo will be so grateful you have asked all those questions and can refer to this build in future years so they won't be so frustrated. I am tempted myself to build her--- something different for the fleet.
Cheers Ian
- Canute, Keith Black, Cathead and 3 others
- 6
-
Hi
Sweet ship looking forward to seeing what you do. We are all basically nosey on here LOl
good luck Ian
- Dave_E, Ryland Craze, Keith Black and 1 other
- 4
-
-
Fab progress Phill it will look super when finished 🙂
- GrandpaPhil, FriedClams and Keith Black
- 2
- 1
-
- Saburo and Edwardkenway
- 2
-
Amazing so realistic finish especially the decking 😁
- Canute, Old Collingwood, RGL and 1 other
- 4
-
I shall take a peak when she's out lol
- mtaylor and Keith Black
- 2
-
The kits arrived 😃 my wife won't even let me look at it-- I have to wait for Christmas 🎅
- modeller_masa, mtaylor and Keith Black
- 1
- 2
-
Hi Keith
Thanks for helping, Yes there are upgrades for the Trumpeter 1/200 plastic kit I was wondering as the Amati kit had a serious amount of PE already if they were required? I have looked at a build's on here and I did not spot anyone saying that had purchased them. Just excited to get ready
- Knocklouder and Keith Black
- 2
-
I have it on very good authority that Santa with Cornwall model boats help is getting me the Bismarck for Christmas 🎄🎄🎄🎄
Are there any additional PE or other bits I should get to supplement it?
- hof00 and Keith Black
- 2
-
looking forward to its completion--- I have this on my Christmas present from Santa list ready for the new year
- hof00, Old Collingwood, mtaylor and 1 other
- 4
-
Hi Chris
Just found out a 50-gun 17C ship was actually built in Lydney Forrest of Dean called the 'Forrester'...she saw lots of action...
That could be a great 'local' build not guess not much world attraction LOL
- mtaylor, thibaultron, chris watton and 2 others
- 5
-
- thibaultron, mtaylor, cotrecerf and 3 others
- 6
-
- AON, mort stoll and flyer
- 3
-
I just so love how the hull looks-- so industrial ------Where are you going to display her?>
- Keith Black, svein erik, mtaylor and 1 other
- 4
-
3 hours ago, modeller_masa said:
You can purchase the original plans and the changed plans at the Bristol SS GB site. I ordered digital high-resolution copies and am waiting for a response.
You'll have to give us a review of them when they arrive
- thibaultron, mtaylor, modeller_masa and 1 other
- 4
Bismarck by hof00 - FINISHED - Amati - 1/200 - Partworks
in - Kit build logs for subjects built from 1901 - Present Day
Posted
Just a quick one..when did she loose the yellow ?