HOLIDAY DONATION DRIVE - SUPPORT MSW - DO YOUR PART TO KEEP THIS GREAT FORUM GOING! (Only 72 donations so far out of 49,000 members - Can we at least get 100? C'mon guys!)
×
druxey
-
Posts
13,324 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by druxey
-
Earlier question I missed on scupper support blocks: they are flush with the frames inside and out. The scupper hole is drilled through the planking and support blocks at the same time after planking. As for lofting frames, we all learn this on the job as we go! -
A fire boom was used to push off an attacking fire ship or burning debris.
-
Congratulations on launching your new project, Eberhard. Lovely subject!
-
I've used Titebond II successfully many times for veneering. The advantage is that the glue can be reactivated more than once by heat. Regular white glues can only be reactivated successfully once. That said, a properly spiled and pre-bent plank will stay in place with only about 30 seconds of finger pressure.
-
Nonpareil, Chuck! Beautifully rendered.
-
So the observations were written, not typeset, as I had assumed. Stag it is, then!
-
I said it was a stretch, Rob! How about if the typesetter accidentally omitted the 'hound' in 'staghound'? More plausible?
-
Not so much Wat the Tyler as Wat the Heck.
-
OK, this many be a stretch, but "other devices" might include a staghound chasing the stag/deer on the counter? Would that work for you?
-
Some lovely color accents now, Mark! A helluva masking job, though. Do treat yourself to a new hose. The tapered wedge shape forward of the quarter gallery allowed the occupant a view forward along the ship's side while ensconced....
-
There are some differences between the photographed prototype and the production model. As noted, the end result is the same.
- 37 replies
-
- 4
-
-
- Model Shipways
- muscongus bay lobster smack
- (and 1 more)
-
Sussex ain't so bad, surely, Keith? I recall as a child visiting an uncle and seeing the glow of the steel furnaces in the night sky.
-
It is more than likely that Wolf was steered by tiller alone. No reflection on your work at all, but on the kit design! Some of these smaller sixth rates were retrofitted with wheels in the position mentioned.
-
Ship’s Bell
druxey replied to acaron41120's topic in Discussion for a Ship's Deck Furniture, Guns, boats and other Fittings
What country, era, type of ship? -
I had no idea that planking a transom could be skirting danger! Looking very fine, Keith.
-
Very neatly done, Clare! The tiller/wheel set-up is unlike any I've seen - usually if a wheel is present, it is on the quarterdeck where the funnel-like structure is sitting.
-
Research in the HMS Ulysses 1797, a Roebuck class ship
druxey replied to Kevin Kenny's topic in Nautical/Naval History
Did you not recieve my two pm's, Kevin? -
Looking really nice so far. Two suggestions: One, skin tones are always darker than you think. Two, blend the upper edge of the beard into the skin are a bit for a softer natural edge.
-
Welcome aboard - or should one say, welcome home?
-
At miniature scales 'cheats' to fool the eye are necessary. Perhaps at least try some of the suggested methods that the experts use to see if you can get a result that pleases you.
-
Brass wire: it bends, it breaks!
druxey replied to Mollusc's topic in Metal Work, Soldering and Metal Fittings
The brulée torch is perfect for modelmaking as well. Heat the metal in dim light to cherry red and then let it air-cool to room temperature. Take care not to burn yourself - or anything else, for that matter. -
First, you've done a very neat and workmanlike job of your first wooden model build. Well done! Clamping parts on a model where nothing is square is always a challenge in this hobby. Your solution worked well - not one I've seen before. As you work your way through more models, problem solving is half the challenge and fun!
- 5 replies
-
- 3
-
-
- Lowell Grand Banks Dory
- Model Shipways
- (and 1 more)
-
Too thin for wood poles: those appear to be lines (ropes).
- 40 replies
-
- 2
-
-
- Speeljacht
- Card
- (and 3 more)
Our Emblem ®
