Jump to content

Cutter Cheerful 1806 by rafine - FINISHED


Recommended Posts

Link to comment
Share on other sites

The dreaded ratlines turned out to not be so dreaded at all. Primarily, this was because there was only the lower shrouds on one mast to do. It just never seemed the endless task that I had encountered on Essex, for example. Like riding a bike, tying clove hitches is something that just comes back to you, once you start doing them again. Having said this, I'm still glad to be done with them and moving on to the topmast and it's rigging.

 

Bob

post-186-0-18435100-1457438197_thumb.jpg

post-186-0-37137300-1457438219_thumb.jpg

post-186-0-98035800-1457438239_thumb.jpg

post-186-0-94096200-1457438272_thumb.jpg

Link to comment
Share on other sites

good looking standing rigging Bob ,

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Link to comment
Share on other sites

Link to comment
Share on other sites

I have now mounted the topmast and added the topmast stay, topmast shrouds and topmast backstay. These complete the standing rigging. The combination of scale, size and a relatively simple, but interesting, rig have made this a very enjoyable process.

 

Now, it is time to turn to the yards and running rigging.

 

Bob

post-186-0-64759200-1457781208_thumb.jpg

post-186-0-47642200-1457781245_thumb.jpg

post-186-0-85476000-1457781270_thumb.jpg

post-186-0-88058800-1457781301_thumb.jpg

post-186-0-68838100-1457781342_thumb.jpg

post-186-0-93426800-1457781371_thumb.jpg

post-186-0-37620500-1457781406_thumb.jpg

post-186-0-43588000-1457781564_thumb.jpg

Link to comment
Share on other sites

Simply beautiful Bob! Love the shot of the canons through the shrouds!

 

Cheers,

 

Nigel.

Edited by UpstateNY

Current Build Logs: H.M.S. Triton Cross SectionUSF Confederacy Model Shipways

 

Completed Log: Red Dragon Artesania Latina

Gallery: Red Dragon: Artesania Latina

 

Member:  Nautical Research Guild

Link to comment
Share on other sites

Link to comment
Share on other sites

Thanks so much Nigel, Dirk, Chuck, Sjors and Nigel for the really nice comments and thanks also to the "likes". It is the homestretch Chuck, but still a lot to do.

 

Bob

Link to comment
Share on other sites

Nicely done Bob, neat and precise just the way it should be.

 

Be Good

 

mobbsie

mobbsie
All mistakes are deliberate ( me )


Current Build:- HMS Schooner Pickle

 

Completed Builds :-   Panart 1/16 Armed Launch / Pinnace ( Completed ),  Granado Cross Section 1/48

Harwich Bawley, Restoration,  Thames Barge Edme, Repair / Restoration,  Will Everard 1/67 Billings 

HMS Agamemnon 1781 - 1/64 Caldercraft KitHM Brig Badger,  HM Bomb Vessel Granado,
Thames Steam Launch Louise,  Thames Barge Edme,  Viking Dragon Boat


Next Build :-  

Link to comment
Share on other sites

Thanks so much Rich, Thomas and Mobbsie for the generous comments and also the "likes". Thomas, I don't know how good  I am at rigging, but I really enjoy doing it and I'm sure that helps.

 

Bob

 

 

 

 

 

 

 

 

 

'. 

Edited by rafine
Link to comment
Share on other sites

janet B             

 

 

                           Hi Bob, i am really drewling over your wonderful workmanship you are a very neat builder.For the painted Black parts i have purchased some

                                       Ebony but i am wondering if anyone has used this type of wood.Anyway Bob keep up the build as i am watching closely and find your pics

                                       will be a great help not only to me but many others.

 

                                                                                      Regards Janet 

Edited by Janet B
Link to comment
Share on other sites

I chose to begin the running rigging with the foresail halliard and the jib halliard and it's in haul and outhaul and then move on to the lower yard and it's rigging.

 

The one item of note on the halliards is the traveler to which the jib halliard is attached. This was made from a ring formed from wire, to which a small brass shackle was attached. The shackle was one of those odd bits that we collect over the years. Fortunately, I had remembered to place the traveler on the bowsprit before I had done any of the standing rigging to the bowsprit. It would have been much more difficult to make it up in place now, rather than simply sliding the completed part on when I did.

 

The lower yard had been made up and painted earlier, but still needed to be fitted out. This meant adding the foot ropes, the yard portion of the sling, the sheet blocks, the lifts, a truss, and the brace blocks and pendants. After these were all in place,  the yard was mounted to the mast on the pin that had previously been mounted on the mast. The truss was then completed, securely holding the yard to the mast. After that I added the sling portion around the masthead and then ran the lifts through blocks hooked to eyes on the mast cap.The braces won't be run until later.

 

I am now working on the topsail yard and it's rigging. 

 

Bob

 

 

post-186-0-62032400-1458383336_thumb.jpg

post-186-0-86280100-1458383386_thumb.jpg

post-186-0-07275400-1458383414_thumb.jpg

post-186-0-88927800-1458383436_thumb.jpg

post-186-0-78224700-1458383458_thumb.jpg

post-186-0-36025600-1458383496_thumb.jpg

post-186-0-15306000-1458383525_thumb.jpg

post-186-0-33939000-1458383551_thumb.jpg

Link to comment
Share on other sites

very nice looking rigging Bob,

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...