Jump to content

Armed Virginia Sloop By captain_hook - FINISHED - Model Shipways - Scale 1:48


Recommended Posts

Your work is so precise, it's almost too perfect! Very nice...

     Current:         Emma C. Berry Lobster Smack-Model Shipways-1:32-1866

        Back on the shelf:    USS Essex- MS- "Old Yellow Box" Solid Hull  Wall Hanger (Half Hull)                                                                                                                                                                                              

   Completed:    18th Century Armed Longboat-MS 1/24

                          USN Picket Boat-MS 1864 1/24                                  

                          US Brig Syren by Sea Hoss- Model Shipways-1803

                          18th Century Carronade/Ship Section

                          Mayflower-Pilgrims Pride by Sea Hoss-Model Shipways-1620

                          18th Century Long Boat by Sea Hoss-Model Shipways

                          USS Constitution by Sea Hoss-Revel-Plastic

Link to comment
Share on other sites

Thank you for the nice words and the likes. Some more work on the carriage. The two skids are made of three layers of wood and the lower front and rear sides are rounded. Nothing is glued yet only dry fitted. Next will be installing all eyebolts.

A0841753-4582-4629-BAB8-B69869893726.jpeg

5E022543-DA5E-41ED-8C28-300A0CEF27F3.jpeg

Edited by captain_hook

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Every time I look at this build it takes me a day to get back to mine , I'm thinking about throwing mine away ! 

Beautiful work !

Dwight

 

current build : Fair America by Model Shipways

 

Completed Build : 18th Century Armed Longboat by Model Shipways Armed Virginia Sloop by Model Shipways

 

Under the bench : Syren by Model Shipways ,, Rattlesnake by Model Shipways

Link to comment
Share on other sites

Hello Dwight, you shouldn‘t think about your model that way because you may get a bad attitude towards it and then it will get more difficult for you to get back on it. Although not every model looks clean, crisp or precise the same way they are all pieces of art with hundreds of hours spent into it. 

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Got themessage .

Dwight

 

current build : Fair America by Model Shipways

 

Completed Build : 18th Century Armed Longboat by Model Shipways Armed Virginia Sloop by Model Shipways

 

Under the bench : Syren by Model Shipways ,, Rattlesnake by Model Shipways

Link to comment
Share on other sites

Each build is an opportunity to learn, develop, and refine your skills. You don't have to be the best ship modeler, but you should set a goal to be better than your previous effort. Keep digging!

 

John

 

Member: Hampton Roads Ship Model Society

Current Builds: Tugboat Dorothy  Newport News Shipbuilding Hull #1 (complete)

                            Iron Clad Monitor (complete) 

                            Sardine Carrier which I will Name Mary Ann (complete)

                            Pilot Boat John H. Estill Newport News Shipbuilding Hull #12 (my avatar)

                    Harbor tug Susan Moran

                    Coast Guard 100' patrol boat

Link to comment
Share on other sites

Some progress on the support timbers, I will use 12 of them. Still only dry-fit. The stop chocks are fitted on the carriage too.

7031A670-9FFD-4EE7-B357-7762304DF7AD.jpeg

7999E915-E7E2-431B-95DE-F13C682727E5.jpeg

6AB05A01-840D-4092-8721-194CD180339D.jpeg

E21BAFEA-7978-4537-9D1F-5145D1660A90.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

  • 2 weeks later...

Next time I should think twice of releasing every crazy idea. Three weekends have passed and I have finally finished the carriage. A small ship like the AVS wouldn’t have used that complicated type of launchway but it was a  good practice for future builds. Only some rope missing to secure the carriage to the bollards.

 

Next and almost final step is rigging. The kit-supplied rope is polyester so I decided to exchange it completely with cotton rope from Syren SMC - I wonder how many orders like that until Syren is out of stock. I need a ropewalk...

 

696B0497-B0FF-4CB1-BAA4-8C14943EED0B.jpeg

 

5E0D7020-31EE-460C-B095-A00277608890.jpeg

C11BB758-2056-4CEB-BDA2-24CA92320CF3.jpeg

980B795A-B884-4145-9C0C-8D61855632FA.jpeg

7A7BD553-4325-420C-B77F-40A0226FF084.jpeg

Edited by captain_hook

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Superb ! It was worth taking the time because the result is just beautiful !

A beautiful setting for an equally beautiful ship !

Wonderful work !

Jean-Paul

 

'You are not carving a bear with a chain saw here folks',

Chuck Passaro, ´Queen Anne Style Barge´ manual of instructions

 

Current builds :

 

Finished build :

 

Next on list :

  • HMS Winchelsea 1764 - Syren Ship Model - 1:48
Link to comment
Share on other sites

  • 1 month later...

The summer holiday has passed and I have assembled the syren serving machine. I am a great fan of any kind of tool and the serving machine is a simple but very useful tool. Ordered some guterman dark brown cotton threat as well, it will fit the syren standing rigging rope very well. 

 

It is a pity that over the last years almost all modeling related hobby stores in Germany have disappeared. I remember a store in almost every shopping mall 20 years ago but nowadays they are all gone so I have to order almost everything I need from Amazon et al. But I think this is part of a more complex problem that only a few people left to accept a lot of time and patience for example to build a model ship (and a lot more modelling related like plastic modelling - I remember a lot of kits in hobby and toy stores but today only few kits are available there). Anyway I am very thankful that companys like syren are ,swimming against the stream‘ and provide useful tools, kits and assessoires to keep ship modeling alive.

BEBE12EC-64FD-4FB7-B7D8-45F5607DD9F0.jpeg

Edited by captain_hook

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

  • 1 month later...

Summer break has passed. Because of high temperature during the last weeks the humidity in my workshop has been so high that even white glue wasn‘t drying in time. So I took a break from building, but now back to work. The stopping mechanism of the windlass was done today. I copied the one Chuck Passaro used as a part of the bowsprit step for cutter cheerful. Basically three layers of boxwood with the iron part fixed inside with two pins on each side and brought to shape with a needle file. 

3B5E120F-0D0A-47AC-9F52-3869D2E7AAC6.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

  • 2 weeks later...

Some more updates. The small stuff takes lot more time than the major steps. I finished boom and gaff, simulated the rope parrel with blackened 0,7mm brass wire. Wanted to make some wood beads out of boxwood but decided to use the supplied brass ones and blackened them instead. That gives a nice contrast to the boxwood mast hoops. Assembled two closed hearts from syren that match the size of the kit-supplied ones. In comparison the two supplied walnut closed hearts.

77BB3D7C-0C73-4E8C-A57D-4946C80E586A.jpeg

95CBCABF-C6E7-4958-AB69-14BEBAC0158D.jpeg

43DA94BE-E2BA-4F30-B810-9029D1704398.jpeg

0621CF4D-7F07-4A2F-955B-476A041A3E87.jpeg

Edited by captain_hook

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Today I finally glued the mast in place. As I tried to put it in place I developed some sort of obsession whether it was upright or not - starting to mistrust my perception. Sometimes when I look at that ship I only see mistakes. But in the end I gave myself permission to leave it as good as it was then. Hm, Hope the mast keep staying in place until epoxy is cured or I will end up checking it every 15 minutes.

3E86C132-F403-4428-802D-A330059EC091.jpeg

DBD400D6-0981-40CF-B3A1-6BD7574CBACF.jpeg

EBD6D227-644A-406E-A139-07B78889360D.jpeg

DFF03EDB-753A-4701-B0D1-8DBEDD6C3C6A.jpeg

Edited by captain_hook

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Looks pretty straight to me!

 

My method of making sure I could keep the mast straight was that I simply didn't glue it at all.  The shrouds and rigging hold it in place, and that way I could adjust it if needed after the shrouds were on before making all the deadeye adjustments mostly permanent (since the rigging is only secured with white glue, a bit of water would loosen them up for adjustment if I really needed to).

Link to comment
Share on other sites

@GuntherMT: That is surely another possibility I haven’t thought of before. But the mast can still be adjusted by the rigging for minor corrections. 
 

The mast is now fixed permanently, makes the hull look pretty small in comparison. I have to attach the boom and gaff next but will add some ropework before that so that I don‘t have to do that later when they are already glued in place. Then I will have to determine the order of rigging the ship.

50B69CFD-B770-468A-B4E1-2C5DB5E52E85.jpeg

376FF175-98DC-428E-B272-BF65F91606A4.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

  • 3 weeks later...

Gaff and boom installed. For the footrope I made a template with similar distances for the knots and made an eyesplice to each end. All blocks on the boom are prepared also. 

02C70E5B-BA76-48C0-AF49-3F9D1CC3D3C8.jpeg

4DBFC2D6-BF05-4C77-876B-64493E092760.jpeg

7C727EFD-21FB-4146-B586-59A339BEA96C.jpeg

C31D69A3-56B3-44C1-BCC6-7B94DC47FB53.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Started to rig the bowsprit. The bobstay and the bowsprit shrouds were served via the serv-o-matic. Took some time til I got them done. Also installed the footropes, wil bring them to shape later. 

01FA8B72-7395-48B5-983F-02A1AACA726E.jpeg

8C44F3E7-4FFA-4570-86E7-C75FC7A09439.jpeg

EC77B08F-2D89-49B6-8009-EF933C89BD36.jpeg

4D80BDB3-3EB3-401C-ABE9-70044D3E9943.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Truly, one of the finest pieces of craftsmanship I've seen in a while!

John

 

Member: Hampton Roads Ship Model Society

Current Builds: Tugboat Dorothy  Newport News Shipbuilding Hull #1 (complete)

                            Iron Clad Monitor (complete) 

                            Sardine Carrier which I will Name Mary Ann (complete)

                            Pilot Boat John H. Estill Newport News Shipbuilding Hull #12 (my avatar)

                    Harbor tug Susan Moran

                    Coast Guard 100' patrol boat

Link to comment
Share on other sites

Thank you very much John for the kind words. The bobstay and bowsprit shroud seizings were way to large so I decided to redo them. Now they look more scale. Next time I will use my serv-o-matic to do the seizing but I have to make myself a fixing tool first. I wanted to bring the footropes to shape with some diluted white glue but as I put the glue onto the cotton rope it suddenly started to shrink 😱. But in the end I managed to bring them back into the former shape by hanging some weight at it. That finishes the standing rigging on the bowsprit except for the heel lashing. I will do that tomorrow.

70657F6F-6BB2-4522-83B2-209317F36DA4.jpeg

5163A5AD-5E9C-447F-8F92-099607A77426.jpeg

162F116C-944D-4666-A8E8-834524B5E78E.jpeg

688DBDF1-2954-4DF3-9685-6EC260EF2D29.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Nicely done!

 

 

 

Able bodied seaman, subject to the requirements of the service.

"I may very well sink, but I'm damned if I'll Strike!" JPJ

 

My Pacific Northwest Discovery Series:

On the slipways in the lumberyard

Union, 1792 - 1:48 scale - POF Scratch build

18th Century Longboat - circa 1790 as used in the PNW fur trade - FINISHED

 

Future Builds (Wish List)

Columbia Redidiva, 1787

HM Armed Tender Chatham, 1788

HMS Discovery, 1789 Captain Vancouver

Santiago, 1775 - Spanish Frigate of Explorer Bruno de Hezeta

Lady Washington, 1787 - Original Sloop Rig

 

Link to comment
Share on other sites

Thank you very much. I made some more progress, starting to do some running rigging on gaff and boom. As Chuck Passaro said in the cheerful build log, it is easier to do this at this stage as all areas are still accessable. Used some hooks on the gaff, a nice little detail I saw in the cheerful log. The tackles are done but the belay points are not available yet so I have to wait with the last step. Did the heel lashing too, almost forgot that. Next will be doing the standing rigging ... next weekend.

538F7D3E-BB34-459E-91FD-9F8559189F54.jpeg

9665563A-DED4-4322-9243-8CB1C0B33B59.jpeg

6463A240-3059-4006-B44E-A17048795D6B.jpeg

D0A69E2E-CEE9-4E5E-AB60-DCB02246871D.jpeg

00608F86-1246-43E3-BF70-CDB3CB8D4757.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Started the standing rigging with the backstays. I‘m not sure if the gaff throat and peak halliards (I mean the part that goes down to the tackles) run inside or outside the backstays, the instructions and the plans give no hints. Any suggestions would be very helpful.  Fortunately I have used hooks to attach the blocks so I can change them if necessary.

BD7D1887-63CB-4883-84DC-91B35C555520.jpeg

557DB376-A6E7-42A0-BBDD-77C0609A0013.jpeg

911F2254-5C09-4972-A80E-4EAB4B1CAB0A.jpeg

Edited by captain_hook

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

@SpyGlass: thank you very much.

 

Today I did more work on the standing rigging and installed the spreader yard horse. The upper part is served over its entire length. The shrouds are next, I consider that the hardest part of the rigging.

D2355261-EA46-4458-9EA4-08B301FCB3D6.jpeg

86822C72-153B-46A3-9D2F-BC1860135007.jpeg

534EC785-D246-4516-86FB-324439912C3B.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

On whether stuff goes inside or outside of the backstays, I found that if I just checked clearances, everything fell into place.  If running it on one side would cause the ropes to interfere with each other, I'd just put it on the other side where it went without any interference.  I'm not sure of what specific lines you are working on, but the simple 'common sense' system based on how stuff fit is how I handled it.

 

Your build is coming along beautifully.  Sort of wish I'd thought to use hooks like you are using on my build now!

Link to comment
Share on other sites

  • 3 weeks later...

I‘m working on the shrouds, have installed the shroud clamps and the laynards but only dry fitted until later adjustment. The supplied shroud clamps are made of britannia casting and I substituted them with syren shrouds clamps - they look much more appropriate and scale. Decided to refit the backstays to a more common way so the running rigging now has a lot of space to run downwards.

106D4301-6DD9-4CA1-87E6-D3A7A6BB717F.jpeg

8D633A61-FDFC-4F84-B4F3-E5E02BB069D3.jpeg

4A8E3831-AFF2-4133-98B8-DCD393A12E27.jpeg

D1820009-203E-448A-9F9F-9A45B9BA2EC9.jpeg

56F578DF-EBBF-401B-BE27-803DC5373023.jpeg

B759B39C-2E69-45FE-A016-DE33B1E7ACB0.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Installed the jeers and the forestay and then hang the lower yard on the hook for a test-fit. 🤗

064304CD-7E87-486F-BA65-06AE6B96F2E9.jpeg

33502414-DBA0-4763-99DC-BD0C875F09B5.jpeg

371B10A7-66A7-4850-A7DC-608FBAD9626C.jpeg

EB13F84C-1073-48FA-B9DC-7FDE4F752F99.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Thank you for all the likes. After finishing the shrouds I started to do the ratlines. Lots of clove hitch knots. The plan calls for .021 rope for the ratlines - instead I used .012 brown syren rope. Else the ratlines would have looked way to heavy. I made a template in Corel Draw for the ratlines including the shrouds to avoid a hourglass effect. Took about 4 hours for the port side.

979C0760-22FE-4D74-937E-8C73E2B87331.jpeg

3DB24CD3-B645-418E-989A-B883C3C7AC78.jpeg

43875766-051F-45BC-8F1C-4717825430B7.jpeg

682DB0BE-FBA3-4336-B82B-53C2EA9EF978.jpeg

17228686-649C-4081-9416-A7B4E874FF15.jpeg

Current Build:

HM Brig Badger 1/48 from Caldercraft plans

Le Coureur 1/48 by CAF


Completed Build:

Armed Virginia Sloop 1/48 by Model Shipways / Gallery
HM Cutter Sherbourne 1/64 by Caldercraft / Gallery

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...