Hubac's Historian Posted July 18, 2019 #91 Posted July 18, 2019 Truly beautiful, clean work, Ondras! She is really coming into form, now! reklein, Ondras71 and mtaylor 3 Quote We are all works in progress, all of the time.
Baker Posted July 19, 2019 #92 Posted July 19, 2019 14 hours ago, Ondras71 said: finally impaled and then drilled holes on the last pins .. Congratulations, It is always a relief when all those holes are drilled and filled Beautiful work Ondras mtaylor 1 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch große-jacht / Yacht D'Oro 1/50 Corel Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Cleaning the 1/72 military collection Si vis pacem, para bellum
Ondras71 Posted July 31, 2019 Author #93 Posted July 31, 2019 Thank you very much Hubacs Historian a Backer..!! Last pins installed and ground .. I really like the graceful shapes of the high torso galleons with lots of wales.. To compare the sides of the Vasa .. O. tadheus, tasmanian, Landrotten Highlander and 11 others 14 Quote Ondras. Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230 Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576 Member of the organizing club - https://wchs-c-2023.klom-admiral.cz/en
Ondras71 Posted August 7, 2019 Author #94 Posted August 7, 2019 Fixed blocks added.. tasmanian, Landrotten Highlander, woodrat and 13 others 16 Quote Ondras. Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230 Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576 Member of the organizing club - https://wchs-c-2023.klom-admiral.cz/en
Ondras71 Posted August 9, 2019 Author #95 Posted August 9, 2019 Thank you for like .. I'm continuing to prepare holes for klinkbout on wales. I painted and pinned the studs clamped on each rib..🔨 Baker, tasmanian, paulsutcliffe and 11 others 14 Quote Ondras. Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230 Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576 Member of the organizing club - https://wchs-c-2023.klom-admiral.cz/en
Ondras71 Posted August 16, 2019 Author #96 Posted August 16, 2019 Working on klinkbout. Here Dutch type, reconstruction Zeven Provincien .. Modified nails 0,7 mm .. wales test.. mtaylor, Valeriy V, Archi and 3 others 6 Quote Ondras. Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230 Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576 Member of the organizing club - https://wchs-c-2023.klom-admiral.cz/en
Ondras71 Posted August 20, 2019 Author #97 Posted August 20, 2019 Drilled holes for the klinkbout.. The model rotated on its stand.. Broken off the rest of the construction ribs and modified the railings' shape.. Archi, Valeriy V, mtaylor and 5 others 8 Quote Ondras. Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230 Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576 Member of the organizing club - https://wchs-c-2023.klom-admiral.cz/en
Ondras71 Posted August 26, 2019 Author #98 Posted August 26, 2019 Aligned height of the main deck ribs.. Finished base of the stern with the upmost deck.. Hubac's Historian, kees de mol, GrandpaPhil and 11 others 14 Quote Ondras. Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230 Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576 Member of the organizing club - https://wchs-c-2023.klom-admiral.cz/en
Baker Posted August 27, 2019 #99 Posted August 27, 2019 looks very good. Great work Ondras. mtaylor 1 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch große-jacht / Yacht D'Oro 1/50 Corel Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Cleaning the 1/72 military collection Si vis pacem, para bellum
Peter Cane Posted August 27, 2019 #100 Posted August 27, 2019 Late to this party. Just read your whole log. Ondras you are an exceptional modeller. Beautiful planking. It has only just dawned on me why they cut a rabbett in the keel especially the bull nosed bow on galleons....to hook the plank into whilst bending it round!!! Why of course. It was your pictures that made this clear to me. Also that no plank should go to a point...because you cannot nail a point to the frames!... Duh!! I am only learning as I watch you guys teach me. Thanks a lot. Pete Ondras71, mtaylor and Hubac's Historian 3 Quote
Ondras71 Posted September 15, 2019 Author #101 Posted September 15, 2019 Thank you Peter Cane, I am still learning as well .. I continue lining colored strips, Using discarded planks with poor grain of wood.. Still loose Wales .. Putty.. Hubac's Historian, Baker, woodrat and 8 others 11 Quote Ondras. Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230 Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576 Member of the organizing club - https://wchs-c-2023.klom-admiral.cz/en
Peter Cane Posted September 15, 2019 #102 Posted September 15, 2019 Ondras..when I saw the beginning stages of this ship when you laid out the rough and ready bulkheads from corrugated card I thought " oh dear what are we in for here?".... But mate!.....you have knocked me for six with the eye to detail, craftsmanship and now present this beautifully made miniature replica. You are a master at this. A joy for me to witness your hands at work. Pete Hubac's Historian, Ondras71, rshousha and 2 others 5 Quote
Ondras71 Posted September 26, 2019 Author #103 Posted September 26, 2019 On 9/15/2019 at 10:47 PM, Peter Cane said: Ondras..when I saw the beginning stages of this ship when you laid out the rough and ready bulkheads from corrugated card I thought " oh dear what are we in for here?".... But mate!.....you have knocked me for six with the eye to detail, craftsmanship and now present this beautifully made miniature replica. You are a master at this. A joy for me to witness your hands at work. Pete Thank you again Peter Cane. Your words are encouraging!! For smoothing clean shapes I created shaped tools and used a belt sander.. Varnish for wooden pores..🎨 O. Archi, Ferit, tarbrush and 6 others 9 Quote Ondras. Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230 Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576 Member of the organizing club - https://wchs-c-2023.klom-admiral.cz/en
Ab Hoving Posted September 28, 2019 #104 Posted September 28, 2019 (edited) Ondra, you are a gifted modeler. The maker of the plans must have had a great imagination, but wether his design is truthful or not, you are doing a magnificent job. And you have one mighty excuse: The shape of the model may be wrong, but up to now we don’t have any written or archaelogical clue how it really must have looked, so who are we to reject? No problem so far with your build. But just promise me to throw that horrible German book in the dustbin after you finished your model. It is no good as far as Dutch ships are concerned and there are four of them there, I believe. For all four we can say that any resemblance with existing Dutch shiptypes is entirely incidental. Good luck. Edited September 28, 2019 by Ab Hoving Ondras71, mtaylor, Baker and 2 others 5 Quote
Ondras71 Posted October 5, 2019 Author #105 Posted October 5, 2019 Thank you for the compliment Ab Hoving! We got into a fight, we have to fight.. Continuation. Main deck base.. The sides of the hull inside.. paulsutcliffe, Baker, tarbrush and 3 others 6 Quote Ondras. Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230 Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576 Member of the organizing club - https://wchs-c-2023.klom-admiral.cz/en
Ondras71 Posted October 9, 2019 Author #106 Posted October 9, 2019 Continuation.. Adjusted cannons according to historical background.. In combination with the Dutch Lafette .. Landrotten Highlander, laarmada, paulsutcliffe and 10 others 13 Quote Ondras. Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230 Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576 Member of the organizing club - https://wchs-c-2023.klom-admiral.cz/en
Ondras71 Posted October 17, 2019 Author #107 Posted October 17, 2019 Thank you for the likes.. O. Hull on the stand reinforced .. Installation of the internal boards continues.. Railing edges aligned.. Hubac's Historian, Valeriy V, tadheus and 7 others 10 Quote Ondras. Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230 Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576 Member of the organizing club - https://wchs-c-2023.klom-admiral.cz/en
rshousha Posted October 17, 2019 #108 Posted October 17, 2019 Do you think 500 years from now our current ship designs will look so awkward? Quote Rick Shousha Montreal
Baker Posted October 18, 2019 #109 Posted October 18, 2019 Great work Ondras. Ondras71 and mtaylor 2 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch große-jacht / Yacht D'Oro 1/50 Corel Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Cleaning the 1/72 military collection Si vis pacem, para bellum
Ondras71 Posted October 19, 2019 Author #110 Posted October 19, 2019 On 10/17/2019 at 10:15 PM, rshousha said: Do you think 500 years from now our current ship designs will look so awkward? Hopefully, our current ship designs will remain accurate and there will be no room for debate.. On 10/18/2019 at 2:48 PM, Backer said: Great work Ondras. Thank you for your support Backer!! Ondras Baker and mtaylor 2 Quote Ondras. Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230 Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576 Member of the organizing club - https://wchs-c-2023.klom-admiral.cz/en
rshousha Posted October 19, 2019 #111 Posted October 19, 2019 Well, my Star class sailboat was designed more than one-hundred years ago and is still a wonderful boat to sail. I think it will still be relevant fifty years from now, so you may have something there! Roger Pellett, Ondras71 and mtaylor 3 Quote Rick Shousha Montreal
Ondras71 Posted November 8, 2019 Author #112 Posted November 8, 2019 Continued on the back wall .. Basis of gun carriages .. Preparation of cannon barrels.. Valeriy V, Landrotten Highlander, davec and 7 others 10 Quote Ondras. Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230 Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576 Member of the organizing club - https://wchs-c-2023.klom-admiral.cz/en
zappto Posted November 9, 2019 #113 Posted November 9, 2019 Amazing work you are doing! very nice ship! Ondras71 and mtaylor 2 Quote Current build: Mamoli - La gloire 1778 Finished builds: Mamoli - Friesland 1663 Mamoli - Lexington 1776
Ondras71 Posted November 18, 2019 Author #114 Posted November 18, 2019 On 11/9/2019 at 5:25 PM, zappto said: Amazing work you are doing! very nice ship! Thank you very much zappto!! Construction of carriages, rather pedestals that will not be seen.. Shape and dimensions taken from the Dutch carriages Zeven provincien.. Test.. My pattern, the deck of Batavia.. O. tarbrush, Baker, paulsutcliffe and 10 others 13 Quote Ondras. Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230 Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576 Member of the organizing club - https://wchs-c-2023.klom-admiral.cz/en
stuglo Posted November 18, 2019 #115 Posted November 18, 2019 Excellent work. Thanks for the many helpful tips and inspiration Ondras71 and mtaylor 2 Quote current build- Swan ,scratch on shelf,Rattlesnake, Alert semi scratch,Le Coureur,, Fubbs scratch completed: nostrum mare,victory(Corel), san felipe, sovereign of the seas, sicilian cargo boat ,royal yacht caroline, armed pinnace, charles morgan whaler, galilee boat, wappen von hamburg, la reale (Dusek), amerigo vespucci, oneida (semi scratch) diane, great harry-elizabethan galleon (semi scratch), agammemnon, hanna (scratch).19th cent. shipyard diorama (Constructo), picket boat, victory bow section
Ondras71 Posted November 23, 2019 Author #116 Posted November 23, 2019 On 11/18/2019 at 6:42 PM, stuglo said: Excellent work. Thanks for the many helpful tips and inspiration Thank you very much stuglo!! I was stopped by the warranty repair of the lathe proxxon, a little woodwork. Gun Port covers .. Side test.. davec, Ronald-V, Landrotten Highlander and 14 others 17 Quote Ondras. Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230 Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576 Member of the organizing club - https://wchs-c-2023.klom-admiral.cz/en
Srodbro Posted November 24, 2019 #117 Posted November 24, 2019 Love the insight of your modeling techniques! Really nice craftsmanship. Hubac's Historian, mtaylor and Ondras71 3 Quote Steve "If they suspect me of intelligence, I am sure it will soon blow over, ha, ha, ha!" -- Jack Aubrey Builds: Yankee Hero, Fannie Gorham, We’re Here, Dapper Tom (x3), New Bedford Whaler, US Brig Lawrence (Niagara), Wyoming (half hull), Fra Berlanga (half hull), Gokstad Viking Ship, Kate Cory, Charles Morgan, Gjoa
Ondras71 Posted December 6, 2019 Author #118 Posted December 6, 2019 On 11/24/2019 at 3:54 PM, Srodbro said: Love the insight of your modeling techniques! Really nice craftsmanship. Thank you very much Srodbro!! O. Founded bases cannon main .. paulsutcliffe, tadheus, GrandpaPhil and 5 others 8 Quote Ondras. Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230 Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576 Member of the organizing club - https://wchs-c-2023.klom-admiral.cz/en
Ondras71 Posted December 9, 2019 Author #119 Posted December 9, 2019 The first training barrel .. Partial result, but it can be produced..!! paulsutcliffe, Landrotten Highlander, GrandpaPhil and 6 others 9 Quote Ondras. Done : President - https://www.modelforum.cz/viewtopic.php?f=177&t=90230 Under construction : Roter Lowe - https://www.modelforum.cz/viewtopic.php?f=177&t=114576 Member of the organizing club - https://wchs-c-2023.klom-admiral.cz/en
Peter Cane Posted December 9, 2019 #120 Posted December 9, 2019 I am getting out of the way of that one! You must be having a lot of joy making the cannons. Taper turning can be a pig when on repitition. Excellently executed. Pete tmj, mtaylor and Hubac's Historian 3 Quote
.thumb.JPG.4d3261ccae06041fa7cc2933fb43d577.JPG)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.