minimini Posted April 14, 2018 #1 Posted April 14, 2018 hi all I am almost finished with the building plan for the HMDS Perlen , so I decidert to start a buid log for her. all i need to do is the last few frames and the bow filler pieces , and then I be ready to make wood dust.The drawing is made in autocad My plan is to start cutting wood when my 3 week vacation start on april 5 Michael malachy, AntonyUK, archjofo and 5 others 8 Quote
laarmada Posted April 15, 2018 #2 Posted April 15, 2018 Hi minimini, ---------------Detectar idiomaAfrikáansAlbanésAlemánAmáricoÁrabeArmenioAzerbaiyanoBengalíBielorrusoBirmanoBosnioBúlgaroCanarésCatalánCebuanoChecoChino (Simplificado)Chino (Tradicional)CingalésCoreanoCorsoCriollo haitianoCroataDanésEslovacoEslovenoEspañolEsperantoEstonioEuskeraFinésFrancésFrisón occidentalGaélico escocésGalésGallegoGeorgianoGriegoGuyaratíHausaHawaianoHebreoHindiHmongHúngaroIgboIndonesioInglésIrlandésIslandésItalianoJaponésJavanésJemerKazajoKirguísKurdoLaoLatínLetónLituanoLuxemburguésMacedonioMalayalamMalayoMalgacheMaltésMaoríMaratíMongolNeerlandésNepalíNoruegoNyanjaPanyabíPastúnPersaPolacoPortuguésRumanoRusoSamoanoSerbioSesotho meridionalShonaSindhiSomalíSuajiliSuecoSundanésTagaloTailandésTamilTayikoTeluguTurcoUcranianoUrduUzbekoVietnamitaXhosaYidisYorubaZulúEspañol It will be very interesting to see the work of a Danish ship, it is not very common here. good luck Canute and mtaylor 2 Quote
druxey Posted April 15, 2018 #3 Posted April 15, 2018 Michael: I'm also looking forward to seeing this model develop: it's always good to see a subject that is a little out of the usual here! Canute and mtaylor 2 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
minimini Posted June 14, 2018 Author #4 Posted June 14, 2018 Hi All Now after 6 weeks of high sunshine, where time has been spent outdoors, it now time for a little update.The first picture shows my work table without any mess, it will probably be the last time it will happen. picture 2 and 3 show The three section bulkhead shapes and 13 out of the 32 bulkheads and last but not least some of the wood I received from Jason from Crown Timberyard last week. It's only when you stand with the part between your hands you get an idea how big this model will be , the ruler is 100 cm long and the 2 bulkheads in the middle are 41 cm wide. Michael archjofo, GrandpaPhil, Jack12477 and 6 others 9 Quote
Mirabell61 Posted June 14, 2018 #5 Posted June 14, 2018 Hello Michael, The "Perlen" is a great and large scratch project, it must be around 1500 mm or more, from mizzen driver boom to bow sprit. Very interesting build..... I wish you much fun with it and happy keel-laying... Nils mtaylor 1 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
minimini Posted June 14, 2018 Author #6 Posted June 14, 2018 Hi Nils she will be 1820 mm long Michael mtaylor and Mirabell61 2 Quote
Mirabell61 Posted June 14, 2018 #7 Posted June 14, 2018 Hi Michael, wow ! what a "monster", is it perhaps planed as a votive-ship model for hanging from church ceiling in Aarhus ? Nils mtaylor and Jack12477 2 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
druxey Posted June 14, 2018 #8 Posted June 14, 2018 Nice size, Michael! mtaylor and Jack12477 2 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
minimini Posted June 14, 2018 Author #9 Posted June 14, 2018 Nils no , on a shelf in my living room Druxey yes she is, I'm almost afraid to think about how much she will weigh when she's done Michael druxey, Jack12477, mtaylor and 1 other 4 Quote
minimini Posted June 14, 2018 Author #10 Posted June 14, 2018 just a couple of pictures more before bedtime, Michael paulsutcliffe, druxey, G.L. and 6 others 9 Quote
minimini Posted June 20, 2018 Author #11 Posted June 20, 2018 Hi All just a little update , before i start the model i have decided to make a build table it is made of 18mm beech ply 700mm wide 2000mm long (sorry for the bad picture) All the bulkheads ( 32 ) and the 9 pieces that make up the stem I post some picture in a few days. out of the 32 bulkheads I only mess up one Michael druxey, archjofo, mtaylor and 4 others 7 Quote
ChadB Posted June 21, 2018 #12 Posted June 21, 2018 Holy smokes! That's going to be huge model! I'm happy I'm getting in on the ground floor of your build and will be able to follow along! Chad Quote Completed Models: Triton Cross Section In Progress: Brig Eagle
mtaylor Posted June 21, 2018 #13 Posted June 21, 2018 You messed up only one bulkhead? You, sir, are a master. I mess up more than that just by looking at it. druxey, AntonyUK and Jack12477 3 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
minimini Posted June 21, 2018 Author #14 Posted June 21, 2018 Michael dvm27, AnobiumPunctatum, druxey and 8 others 11 Quote
AnobiumPunctatum Posted June 21, 2018 #15 Posted June 21, 2018 Have you an laser cutter at home? The result is looking really nice ChadB and mtaylor 2 Quote Regards Christian Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36 On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777 Paused: HMS Triton, 1771 - 1/48 "Have no fear of perfection - you'll never reach it." Salvador Dali
minimini Posted June 24, 2018 Author #16 Posted June 24, 2018 Mark A master, no just lucky Christian no but I have access to one where I only pay for the materials I cut , plus 10 $ per hour My building board is finished and the same are the 8 angle braces next one on the list is to cut some wood on my new table saw Michael GrandpaPhil, paulsutcliffe, G.L. and 5 others 8 Quote
AntonyUK Posted June 24, 2018 #17 Posted June 24, 2018 Hi Michael. That's one super sized ship. I love the shape of the bulkhead you got wrong. But you got it geometrically similar. Nice building board. But with a model that size you need a table like Gaetan uses See link below. https://modelshipworld.com/index.php?/topic/15340-74-guns-ship-by-gaetan-bordeleau-124/&page=4 Will save your back. with all that twisting and trying to get into difficult places. This is a must follow for me. Regards Antony. mtaylor, minimini and archjofo 3 Quote Best advice ever given to me."If you don't know ..Just ask. Completed Mayflower Completed Fun build Tail boat Tailboat Completed Build Chinese Junk Chinese Pirate Junk Completed scratch built Korean Turtle ship 1/32 Turtle ship Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia On hold. Bounty Occre 1/45 Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section Completed H.M.S. Victory X section by Coral. HMS Victory cross section Completed The Black Pearl fun build Black Queen Completed A large scale Victory cross section 1/36 Victory Cross Section
minimini Posted June 24, 2018 Author #18 Posted June 24, 2018 hello Antony Yes, that's also one of the things I've been worried about, so I'm looking at this table Michael AntonyUK and mtaylor 2 Quote
minimini Posted July 11, 2018 Author #19 Posted July 11, 2018 Hi just a small update , the knee parts and keel ar done ,one last thing that needs to be done is tapering the knee of the head. Below is a dry fit of the bulkheads except frame nr. c Michael paulsutcliffe, archjofo, malachy and 10 others 13 Quote
Siegfried Posted January 3, 2021 #20 Posted January 3, 2021 Wow, fully rigged in 1:30 scale she will be huge. What's her final size? Looking forward see more of you log, Daniel mtaylor 1 Quote Cheers, Daniel In dockyard: HM Colonial Schooner for Port Jackson (scratch), HM Armed Vessel Bounty, HM Cutter Sherbourne Next builds: HMS Victor 1797 & Gannet 1814 Cruiser class sloops, ship and brig rigged (scratch)
the learner Posted December 10, 2022 #21 Posted December 10, 2022 No post since 2019! I do hope mimimimi doing well. This looked like it was going to be an interesting build. mtaylor 1 Quote Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.