KUDIN Posted April 13, 2020 Author #121 Posted April 13, 2020 Hello! ------------------------------------------------------------------------------------------------------------------------------------------ Siggi52, KORTES, Oliver1973 and 11 others 14 Quote
Jorge Diaz O Posted April 17, 2020 #122 Posted April 17, 2020 wow master. mtaylor, KUDIN and FrankWouts 3 Quote -HMS Tritón 1/48 1773 en scracht (TERMINADO) -HMS Winchelsea 1/35 1764 full scracht (EN PROYECTO)
the learner Posted April 23, 2020 #123 Posted April 23, 2020 On 6/10/2019 at 7:42 PM, CptGuy said: I believe that is called a monkey fist Ervice s Made a lot of those while I was in the service at the end of a heaving line. mtaylor, KUDIN and FrankWouts 3 Quote Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
KUDIN Posted April 30, 2020 Author #124 Posted April 30, 2020 ... KentM, Jorge Diaz O, mtaylor and 3 others 6 Quote
KUDIN Posted May 6, 2020 Author #125 Posted May 6, 2020 👋... Dali, mtaylor, JpR62 and 2 others 5 Quote
stuglo Posted May 6, 2020 #126 Posted May 6, 2020 On 3/12/2020 at 11:32 PM, KUDIN said: Hello! Waterway... Brilliant. Where did you get the large plastic clamps ? FrankWouts, archjofo, KUDIN and 2 others 5 Quote current build- Swan ,scratch on shelf,Rattlesnake, Alert semi scratch,Le Coureur,, Fubbs scratch completed: nostrum mare,victory(Corel), san felipe, sovereign of the seas, sicilian cargo boat ,royal yacht caroline, armed pinnace, charles morgan whaler, galilee boat, wappen von hamburg, la reale (Dusek), amerigo vespucci, oneida (semi scratch) diane, great harry-elizabethan galleon (semi scratch), agammemnon, hanna (scratch).19th cent. shipyard diorama (Constructo), picket boat, victory bow section
KUDIN Posted May 6, 2020 Author #127 Posted May 6, 2020 28 minutes ago, stuglo said: ...Where did you get the large plastic clamps ? They are in construction stores. Not in small ones that are in the city, but in large (אזור תעשיה) mtaylor, stuglo and FrankWouts 3 Quote
Dziadeczek Posted May 6, 2020 #128 Posted May 6, 2020 Outstanding build! Asking just out of curiosity, what are you feequently drinking in your videos? Tea? Is the other 'distorted' voice, the voice of your son? Can we see him from time to time as well? Regards, Thomas mtaylor, KUDIN and FrankWouts 2 1 Quote
dvm27 Posted May 7, 2020 #129 Posted May 7, 2020 I think it's his inner voice Thomas. Even with the Chrome translator I can't figure out half of what he's saying half the time but the work speaks for itself. FrankWouts, mtaylor, KUDIN and 1 other 4 Quote GregwebsiteAdmiralty Modelsmoderator Echo Cross-section buildAdmiralty Models Cross-section BuildFinished buildPegasus, 1776, cross-sectionCurrent buildSpeedwell, 1752
KUDIN Posted May 9, 2020 Author #130 Posted May 9, 2020 On 5/7/2020 at 12:22 AM, Dziadeczek said: Outstanding build! Asking just out of curiosity, what are you feequently drinking in your videos? Tea? Is the other 'distorted' voice, the voice of your son? Can we see him from time to time as well? Regards, On 5/7/2020 at 5:44 AM, dvm27 said: I think it's his inner voice Thomas. Even with the Chrome translator I can't figure out half of what he's saying half the time but the work speaks for itself. Thomas , Greg ! Thanks for the feedback on the work! I drink black Turkish coffee ... And the voice-over is my voice changed by the program. A little humor, I think, doesn’t hurt! mtaylor, JpR62, paulsutcliffe and 2 others 4 1 Quote
KUDIN Posted May 17, 2020 Author #131 Posted May 17, 2020 Hello! 😎 ---------------------------------------------------------------------------------------------------------------------------------------------- Amalio, Oliver1973, paulsutcliffe and 7 others 10 Quote
Hubac's Historian Posted May 17, 2020 #132 Posted May 17, 2020 Hi Kudin- I love your videos! On this most recent video, I have a question for clarification: it seems that you are gluing your deck planking directly to the paper plan layout which, itself, must be glued to the sub-decking. What adhesive of paper to sub-decking do you use to ensure there’s no de-lamination? Clearly there are tremendous advantages to being able to taper planking directly to the layout, in-situ. md1400cs, mtaylor and FrankWouts 3 Quote We are all works in progress, all of the time.
DavidG Posted June 4, 2020 #133 Posted June 4, 2020 Hi Andrey, thank you for making and posting your videos. Over the time I went through them all, especially liked the ones on the rigging. I recognize the nice blocks you make. Do you file them individually? Or do you happen to have instruction on block making? best, David mtaylor and FrankWouts 2 Quote Past builds: Prins Willem, Amati Coca Current Build: Occre Diana
KUDIN Posted June 13, 2020 Author #134 Posted June 13, 2020 On 5/18/2020 at 1:58 AM, Hubac's Historian said: Hi Kudin- I love your videos! On this most recent video, I have a question for clarification: it seems that you are gluing your deck planking directly to the paper plan layout which, itself, must be glued to the sub-decking. What adhesive of paper to sub-decking do you use to ensure there’s no de-lamination? Clearly there are tremendous advantages to being able to taper planking directly to the layout, in-situ. Hey. After the deck is ready, I will remove it from the hull and "pass through" the dowels. On 6/4/2020 at 12:33 PM, DavidG said: Hi Andrey, thank you for making and posting your videos. Over the time I went through them all, especially liked the ones on the rigging. I recognize the nice blocks you make. Do you file them individually? Or do you happen to have instruction on block making? best, David Hello! No, I will not do blocks one at a time. I'll try to make them on a milling machine. FrankWouts, mtaylor and Hubac's Historian 3 Quote
KUDIN Posted June 13, 2020 Author #135 Posted June 13, 2020 Hello! A couple of episodes ... KentM, Jeronimo, Dali and 4 others 7 Quote
stuglo Posted June 13, 2020 #136 Posted June 13, 2020 That's quite a table saw. more powerful than my Proxxon. ? What make and where did you obtain it. mtaylor, FrankWouts and KUDIN 3 Quote current build- Swan ,scratch on shelf,Rattlesnake, Alert semi scratch,Le Coureur,, Fubbs scratch completed: nostrum mare,victory(Corel), san felipe, sovereign of the seas, sicilian cargo boat ,royal yacht caroline, armed pinnace, charles morgan whaler, galilee boat, wappen von hamburg, la reale (Dusek), amerigo vespucci, oneida (semi scratch) diane, great harry-elizabethan galleon (semi scratch), agammemnon, hanna (scratch).19th cent. shipyard diorama (Constructo), picket boat, victory bow section
Guest Posted June 15, 2020 #137 Posted June 15, 2020 You can find more details and information on the site hire: https://en.shipphotographer.com/pinky-schooner-glad-tidings-proces Quote
KUDIN Posted June 17, 2020 Author #138 Posted June 17, 2020 On 6/13/2020 at 10:20 PM, stuglo said: That's quite a table saw. more powerful than my Proxxon. ? What make and where did you obtain it. Hello! I bought in Israel, in one of Tel Aviv's stores (I still have not learned how to buy from the Internet). As far as I know, PROXON has 2 models; Such as mine: And perhaps one like yours: On 6/15/2020 at 3:35 AM, shipphotographer.com said: You can find more details and information on the site hire: And you, Olga - hello! 😎 FrankWouts, Archi, mtaylor and 2 others 5 Quote
KUDIN Posted July 13, 2020 Author #139 Posted July 13, 2020 Hello! A small damage in the stern (gallery fence) gave its result ... He distracted from the deck, from which he was a little tired and told with photographs how he built the stern. JpR62, mtaylor, KentM and 2 others 5 Quote
KUDIN Posted July 27, 2020 Author #140 Posted July 27, 2020 New - a little ... But, for order 😎 : KentM, FrankWouts, Jorge Diaz O and 2 others 5 Quote
KUDIN Posted August 10, 2020 Author #141 Posted August 10, 2020 Hey. Planned side sections of the deck - ready ... Further extraction from the enclosure. KentM, Oliver1973, Jeronimo and 4 others 7 Quote
KUDIN Posted August 26, 2020 Author #142 Posted August 26, 2020 Hey. Part of the future deck is ready. In this film, I will remove it from the model's body. I am sure that thanks to the three-layer gluing, the shape will remain unchanged. I will carry out further processing on the table ... 😉 FrankWouts, laarmada, shipcarpenter and 3 others 6 Quote
KUDIN Posted September 6, 2020 Author #143 Posted September 6, 2020 ✋... Jorge Diaz O, toms10, mtaylor and 4 others 7 Quote
KUDIN Posted September 27, 2020 Author #144 Posted September 27, 2020 JpR62, Captain Poison, shipcarpenter and 4 others 7 Quote
Oliver1973 Posted September 28, 2020 #145 Posted September 28, 2020 Thanks for all the usefull videos, Andrey. mtaylor, Jorge Diaz O, FrankWouts and 1 other 4 Quote "Tout le monde connaît le nom du Vengeur, combien peu connaissent celui du Redoutable!" -- Auguste Jal, 1867 https://www.olivers-historic-shipyard.com/ on Facebook Olivers Historic Shipyard on YouTube Olivers Historic Shipyard on Instagram Olivers Historic Shipyard in work: La Belle 1/36 POF Le Redoutable 1/48 POF; 74-Gun Temeraire-Class by Jacques-Noël Sané Bucentaure 1/48 POF; 80-Gun Bucentaure-Class by Jacques-Noël Sané
KUDIN Posted September 28, 2020 Author #146 Posted September 28, 2020 I'm glad they are useful, Oliver! 😉 FrankWouts, mtaylor and Oliver1973 3 Quote
KUDIN Posted October 3, 2020 Author #147 Posted October 3, 2020 Hello! The name of the film is 3 actions: MAC dowel in glue, PUMP him into the deck and ... NIP it with wire cutters! More or less like this. 😉 Jorge Diaz O, laarmada, JpR62 and 2 others 5 Quote
KUDIN Posted October 10, 2020 Author #148 Posted October 10, 2020 😎 ------------------------------------------------------------------------------------------------------------------------------------------ KentM, mtaylor, Brinkman and 1 other 4 Quote
Brinkman Posted October 10, 2020 #149 Posted October 10, 2020 Amazing build! It's very interesting to follow and thank you for posting the GIFs, they are very helpful! mtaylor and KUDIN 2 Quote
KUDIN Posted October 16, 2020 Author #150 Posted October 16, 2020 Hello! I started working on the gratings. Until the final result - 5 films :-) Jorge Diaz O, mtaylor, KentM and 2 others 5 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.