Jump to content

HMS Winchelsea 1764 by Matt D 1:48


Recommended Posts

Regarding the two stern filler pieces, here are mine installed. Hope this helps.

Winchelsea_8522.thumb.jpg.7ce4442415fb436c917a547007ac46f0.jpg

Mike

Edited by Stuntflyer

Current build - Sloop Speedwell 1752 (POF)

Completed builds - 18 Century Longboat (POB) , HM Cutter Cheerful  1806 (POB), HMS Winchelsea 1764 (POB)

 

Member: Ship Model Society of New Jersey

Link to comment
Share on other sites

Bollards:

Chuck, thank you for including extras of the bollard blanks - I used all of them to come up with a passable pair.  I wasted the first three by trying to use sandpaper over a rounded edge to carve out the larger grooves.  Then I figured out that I should try to make them more squared using jeweler’s files.  That worked much better.   I like Rusty’s idea of not gluing them onto the model until I have to.  I’d hate to break them after all the work it took to make them.

 

edit:  I noticed after posting my pictures that the bollards were sitting high compared to Chuck’s. So I took some measurements and lowered them to the right location.

58272378-AD7A-4EE8-81A4-DC6617186BC9.jpeg

464952DE-9797-4EA2-A94B-D40251A7EB75.jpeg

 

8B16C24F-2EE5-4940-B06F-DAFD610BB94F.jpeg

Edited by Matt D
Added photo with bollards lowered

Current Build:

HMS Winchelsea 1:48 (Group Project)

 

Completed Builds:

Virginia 1819 Artesania Latina - 1:41 

 

 

 

Link to comment
Share on other sites

I’ve made some progress on the wales and painted the gun ports on the starboard side.  I used masking tape because I’ve never been sorry for doing so and can’t say the same for the converse.  I used Testors acrylic Caboose Red paint and did it with a brush.

6CD1E2B9-0575-4DEA-BB26-E08744CB9A12.thumb.jpeg.521a9bc2209718c298ba14c8ab2440a5.jpeg3420FB4A-6F14-445F-B50F-1D8CCF1ED5DC.jpeg

5ED6C421-61C6-4967-9E80-E25C92D40E2B.jpeg

3D43CD2C-1247-4D05-B6E7-90A1F4C47DD2.jpeg

 

Edited by Matt D
Adjusted the order of the photos

Current Build:

HMS Winchelsea 1:48 (Group Project)

 

Completed Builds:

Virginia 1819 Artesania Latina - 1:41 

 

 

 

Link to comment
Share on other sites

  • 2 months later...

I’ve been working on the upper planking on the starboard side.  I’ve had to back up and fix this a couple of times.  It’s not perfect by any means, but I think it will look fine with the frieze over it.  I just discovered that I did not fair the stern quite enough.  I’ve tried just sanding it down, but I’m not sure it’s enough.  Luckily, I haven’t gotten up that high on the port side, so I still have time to fair it more before planking.  If I understand the rest of the construction, the difference will be completely hidden.  

11BD5337-F2C5-4AD0-B047-93A44EAA46C5.jpeg

3D62F13A-01E7-4D1D-A953-4C19FBE6F509.jpeg

B8E1E36A-666B-4182-BC3A-EF0CCB26BF5F.jpeg

9EE9444C-DA34-4054-A748-E6BF8EAFFB96.jpeg

B9C64390-50D8-4498-A299-F8EEE3257241.jpeg

051CA59E-EC9A-404F-B4A3-1C1C5C56CAD5.jpeg

Current Build:

HMS Winchelsea 1:48 (Group Project)

 

Completed Builds:

Virginia 1819 Artesania Latina - 1:41 

 

 

 

Link to comment
Share on other sites

Your planking looks very nice though, great job!!

Current builds;

 Henry Ramey Upcher 1:25

Providence whaleboat- 1:25     HMS Winchelsea 1764 1:48 

Completed:

HM Cutter Sherbourne- 1:64- finished    Triton cross section scratch- 1:60 - finished 

Non ship:  SBD-3 Dauntless 1:48 Hasegawa -FINISHED

 

 

Link to comment
Share on other sites

Thank you, Mark and Edward.  And thanks for the likes.  I’m trying to carve out about 1/16” at the transom to allow the planks to tuck in enough to clear the window opening.  I think it will work.  I’ll have pictures over the weekend.

Current Build:

HMS Winchelsea 1:48 (Group Project)

 

Completed Builds:

Virginia 1819 Artesania Latina - 1:41 

 

 

 

Link to comment
Share on other sites

I made more space for the window by carving out about 1/16” between the planks and the stern frame.  It’s a little curvier than it should be, but I don’t think that will show.

.B8E02671-55BF-445F-92D1-D8F0CE808B77.jpeg.2ba2a2237e25aee153e1371e5d9de34e.jpeg

839287EC-2823-4230-B27D-7C31A2606DE9.jpeg.9d5f97f42e9d4c724c792b688d2ae705.jpeg

Happy St. Patrick’s Day, friends!

594D3505-B52F-4A6C-93A0-24F6D022FE61.jpeg.87c39a72d0250bff2b683ea87b177eaa.jpeg

 

Current Build:

HMS Winchelsea 1:48 (Group Project)

 

Completed Builds:

Virginia 1819 Artesania Latina - 1:41 

 

 

 

Link to comment
Share on other sites

That will work kind of.  But just be prepared to do some extreme shaping when you start building those qgalleries.  If at all possible you should try and straighten it Just just a bit more.  Less curvy.  But you can make it work if you dont.

Link to comment
Share on other sites

  • 1 month later...

I’ve been busier with work doing it from home than I usually am when I go to the office.  I’ve caught the port side up with the starboard.  I also completed the first two rows of planking below the wales.  Next, I’ve got some sanding to do and a coat of wipe-on polyurethane. 

DC86A6C9-E884-482B-8C3E-5E615B6115A1.jpeg

Current Build:

HMS Winchelsea 1:48 (Group Project)

 

Completed Builds:

Virginia 1819 Artesania Latina - 1:41 

 

 

 

Link to comment
Share on other sites

Glad to see you found some time to work on her. Well done!

 

 

Rusty

"So Long For Now" B) 

 

Current Builds: Speedwell

 

 

Completed Build Logs:  HMS Winchelsea 1/48   Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Thanks, Mark, Chuck, and Rusty.  One thing I didn't really share with the group is that planking above the wales was really a bear for me.  I pealed off and redid about half the planks for various fit and finish problems.  At one point, I got a full row above a problem and had to scrape off both, wondering all along what kind if idiot would do such a thing.  So for anyone else that finds that part a struggle: You are not alone!  I'm back to feeling pretty good about my chances of success on this project.

Current Build:

HMS Winchelsea 1:48 (Group Project)

 

Completed Builds:

Virginia 1819 Artesania Latina - 1:41 

 

 

 

Link to comment
Share on other sites

Its all a learning process.  If you can get through planking this hull I am sure your next project will be even better.

Link to comment
Share on other sites

  • 1 month later...

It has been slow going on my Winnie lately.  I’ve completed the wales and the black strake, port and starboard.  I was concerned that the wipe on poly would smear the acrylic paint onto the black strake.  So I put a coat on the wales before adding the black strake.  That may have been unnecessary, but I figured better safe than sorry.    

FF7363FD-160D-437D-AF31-8C4AA9E40043.jpeg

191D838E-7B32-4513-A761-6168DCABA095.jpeg

CC8AFDC4-7F40-4EC6-809E-D39028305427.jpeg

9DE6808E-DF6D-4884-81E1-3045B73825E0.jpeg

7B5A1007-D8D7-41CE-AD66-049B962B9276.jpeg

Current Build:

HMS Winchelsea 1:48 (Group Project)

 

Completed Builds:

Virginia 1819 Artesania Latina - 1:41 

 

 

 

Link to comment
Share on other sites

  • 1 month later...

I’ve just completed the first band of planking on the starboard side.  It’s not perfect, but I’m pretty happy with it.  The edge bending went a lot easier than I expected.  I did break the first plank twice before I got one bent without breaking.  Once the bend is set, the plank lays flat on the bulkheads so easily.  

C4829CFA-CB35-4C61-8EE3-CF3FF7728F7D.jpeg

190F9E37-E984-4726-B921-2AC0BDEBC80D.jpeg

95BF7746-F96A-4CEA-86C6-D8594D7292CA.jpeg

0442F122-826C-442F-91C3-AED6F56F4634.jpeg

Current Build:

HMS Winchelsea 1:48 (Group Project)

 

Completed Builds:

Virginia 1819 Artesania Latina - 1:41 

 

 

 

Link to comment
Share on other sites

  • 1 month later...

I’ve finished planking the starboard side.  This is the second hull I've planked and my first attempt at single planking.  So I’m pretty happy with it.  That said, there are several mistakes that will be obvious to this group.  I had to take off and redo several pieces in the first belt near the stern because I had not faired bulkheads 27 and 28 enough.  The bend at that spot kept getting worse the closer I got to the stern post.  I have given thought to shelving the project, but I can’t do it.  I really want to finish it.  I the worst case, I’ll feel compelled to build another copy down the road.

 

3620C96C-4948-49E7-904B-FB2D997685F8.jpeg

283EB385-9342-4CE8-845D-771236D49A46.jpeg

A2D10BEB-4C4E-4BDA-AF3B-AD8B60CF32C2.jpeg

92CCBE9E-DAEE-4654-AD6B-1CD379567BA0.jpeg

7738C691-0E67-4856-AC48-CBC24BB4EA5F.jpeg

08A23025-00F3-4A10-9EBB-8A2F4A5438FC.jpeg

Current Build:

HMS Winchelsea 1:48 (Group Project)

 

Completed Builds:

Virginia 1819 Artesania Latina - 1:41 

 

 

 

Link to comment
Share on other sites

Nice work Matt 

Current builds;

 Henry Ramey Upcher 1:25

Providence whaleboat- 1:25     HMS Winchelsea 1764 1:48 

Completed:

HM Cutter Sherbourne- 1:64- finished    Triton cross section scratch- 1:60 - finished 

Non ship:  SBD-3 Dauntless 1:48 Hasegawa -FINISHED

 

 

Link to comment
Share on other sites

Thanks, Edward.  I hope things are getting better for you wrt the pandemic.  Thanks also for the likes.  
 

The more I look at it, the happier I am with the starboard planking.  I think I was only seeing the flaws at first. But picturing more progress in my mind, I think it will come out pretty nice.

Current Build:

HMS Winchelsea 1:48 (Group Project)

 

Completed Builds:

Virginia 1819 Artesania Latina - 1:41 

 

 

 

Link to comment
Share on other sites

  • 1 month later...

It was a big day for me today.  I finished planking the port side.  It came out quite a bit better than the starboard, but I had a lot more experience to work with.  It’s not devoid of errors, but I’m pretty happy with it.  Here are some photos including before and after WOP.  I took the dead on bow and stern photos and you can see that they don’t match up very well.  That’s something I’ll try to do better on subsequent models.

E5363C3E-C9E3-4064-9D4F-9F05A0D76391.jpeg

696FE5AE-C805-4F2C-91BC-C1AD247CF087.jpeg

54ED5908-3829-4C72-80E6-4EEC61B31AFE.jpeg

DE3364A1-7697-446E-A584-C024CCCAEDAD.jpeg

996D3C26-0F11-4BC0-9F75-738C253B9903.jpeg

BF7B4F6C-F522-445D-B521-FE09FBC30E9F.jpeg

090E9A2C-A669-44C4-8C13-70663965A0DC.jpeg

CF7636AB-5354-43BE-A261-3C2569C77161.jpeg

Current Build:

HMS Winchelsea 1:48 (Group Project)

 

Completed Builds:

Virginia 1819 Artesania Latina - 1:41 

 

 

 

Link to comment
Share on other sites

Congratulations on completing the planking, it's quite a milestone with this model. Good luck with the next steps of the build Matt👍

Current builds;

 Henry Ramey Upcher 1:25

Providence whaleboat- 1:25     HMS Winchelsea 1764 1:48 

Completed:

HM Cutter Sherbourne- 1:64- finished    Triton cross section scratch- 1:60 - finished 

Non ship:  SBD-3 Dauntless 1:48 Hasegawa -FINISHED

 

 

Link to comment
Share on other sites

The planking looks really good. Very symmetric!! 

Current: 

USF Confederacy - Model Shipways (Build Log)

HMS Pickle - Caldercraft (Build Log)

 

Complete:

Virgina 1819 - Artesania Latina (Gallery)

U.S. Brig Syren - Model Shipways (Build Log, Gallery)

 

On the shelf:

Armed Virginia Sloop - Model Shipways

Link to comment
Share on other sites

Thanks, Edward and WalrusGuy.  And thanks for the likes, too.  I’m glad to be moving into chapter 3 soon.  It’s the part I’ve been looking forward to the most.

Current Build:

HMS Winchelsea 1:48 (Group Project)

 

Completed Builds:

Virginia 1819 Artesania Latina - 1:41 

 

 

 

Link to comment
Share on other sites

  • 3 weeks later...

I’m now firmly into chapter 3.  My upper counter planking went reasonably well, but I’m glad it will be covered up.  I chose to leave the window frames natural instead of painting them like some have done.  I bought some Testors Grimy Black for the window covers, but I thought it was too light.  So I mixed it 50/50 with flat black.  I thought that was still too light, until I put it together.  Now I think I probably could have gone with the Grimy Black alone.  My cap covers came out pretty good except for two that split just a little near the uprights.  I haven’t decided whether or not to try to replace them.  And lastly, the stern ports are a little out of round, but I’m not done with them.

C1443F6B-0E74-4070-9006-ED45028BEFF3.jpeg

2AAE6DA8-1B5B-4E5E-8E65-89FD3BE67555.jpeg

Edited by Matt D
Missing content

Current Build:

HMS Winchelsea 1:48 (Group Project)

 

Completed Builds:

Virginia 1819 Artesania Latina - 1:41 

 

 

 

Link to comment
Share on other sites

I can’t remember which covers get painted, the inside or the outside but check before you replace any.

JJ

Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now)

 

                         HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship

 

Link to comment
Share on other sites

I’ve started framing the port side q gallery and I need some advice before I go any further.  I think I need to taper the upper counter in further so it mates up better with the gallery floor piece.  What do you think?

DA8A44F3-55C5-4A67-B6CC-597330A37CDE.jpeg

Current Build:

HMS Winchelsea 1:48 (Group Project)

 

Completed Builds:

Virginia 1819 Artesania Latina - 1:41 

 

 

 

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...