G.L. Posted March 24, 2020 #61 Posted March 24, 2020 Whaw, that goes fast. And such a clean joinery! I wonder how you get it done. G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
druxey Posted March 24, 2020 #62 Posted March 24, 2020 Terrific work, especially the scale working hinges! Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
Bitao Posted March 25, 2020 Author #63 Posted March 25, 2020 On 3/24/2020 at 3:06 PM, KORTES said: This is an outstanding masterpiece of mastery level and the culture of work. My best regards. Expand Thank you so much for your approval mtaylor 1
Bitao Posted March 25, 2020 Author #64 Posted March 25, 2020 On 3/24/2020 at 5:41 PM, G.L. said: Whaw, that goes fast. And such a clean joinery! I wonder how you get it done. Expand I've been working since the middle of last September. I usually have enough time, so I have enough patience to finish it. No less than 10 hours a day. Except for machining, most of the parts are done by hand. I am very concerned about the cleanliness of the work environment, not only to reduce the dust caused by the processing bias, but also to accurately find the tools I need. mtaylor, hexnut and G.L. 3
Bitao Posted March 25, 2020 Author #65 Posted March 25, 2020 On 3/24/2020 at 6:09 PM, druxey said: Terrific work, especially the scale working hinges! Expand Thank you for the compliment mtaylor 1
wefalck Posted March 25, 2020 #66 Posted March 25, 2020 Whow, 10+ hours per day in the workshop ! I usually do not muster enough energy for more than a hour or two after work ... mtaylor 1 wefalck panta rhei - Everything is in flux
Bitao Posted March 26, 2020 Author #67 Posted March 26, 2020 GrandpaPhil, SJSoane, hexnut and 17 others 20
yvesvidal Posted March 26, 2020 #68 Posted March 26, 2020 Are you a jeweler by trade? This is amazing. Yves mtaylor and EricWilliamMarshall 2
Tony Hunt Posted March 26, 2020 #69 Posted March 26, 2020 On 3/26/2020 at 1:42 PM, yvesvidal said: Are you a jeweler by trade? This is amazing. Yves Expand It really is. I struggle to make full-size furniture that nice! mtaylor 1
dvm27 Posted March 26, 2020 #70 Posted March 26, 2020 Magnificent work! Will the cabin's lucky occupant have a canvas covered straw mattress to lie on? druxey and mtaylor 2 GregwebsiteAdmiralty Modelsmoderator Echo Cross-section buildAdmiralty Models Cross-section BuildFinished buildPegasus, 1776, cross-sectionCurrent buildSpeedwell, 1752
BANYAN Posted March 27, 2020 #71 Posted March 27, 2020 (edited) Oh come on now; you have to have a team of elves out the back doing this? Truely beautiful detail; you are a master craftsman - I think any cabinet maker would be proud of those furniture items, yet alone these being at scale! Is that small vise / gripper you show at post #67, 7 down a purchased item? With your skills, you probably made this? It looks a very handy tool/accessory. If you made this would you please show some other shots of it? DSC01115.JPG.62923c7e9edf6173126b42106c0c3069.jfifFetching info... cheers Pat Edited March 27, 2020 by BANYAN druxey, mtaylor and EricWilliamMarshall 2 1 If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)
Bitao Posted March 27, 2020 Author #72 Posted March 27, 2020 On 3/27/2020 at 12:13 AM, BANYAN said: Oh come on now; you have to have a team of elves out the back doing this? Truely beautiful detail; you are a master craftsman - I think any cabinet maker would be proud of those furniture items, yet alone these being at scale! Is that small vise / gripper you show at post #67, 7 down a purchased item? With your skills, you probably made this? It looks a very handy tool/accessory. If you made this would you please show some other shots of it? DSC01115.JPG.62923c7e9edf6173126b42106c0c3069.jfif 151.55 kB · 3 downloads cheers Pat Expand Thank you for your appreciation. I've posted this rectangular locator separately. If you're interested, you can take a look. I designed and built them myself. Jorge Diaz O, hexnut and mtaylor 3
Bitao Posted March 27, 2020 Author #73 Posted March 27, 2020 On 3/26/2020 at 10:02 PM, dvm27 said: Magnificent work! Will the cabin's lucky occupant have a canvas covered straw mattress to lie on? Expand Thank you for your appreciation. . I'm GonNa make the canvas mats later . . Otherwise, it's really uncomfortable to lie on it! mtaylor and dvm27 2
Bitao Posted March 27, 2020 Author #74 Posted March 27, 2020 On 3/26/2020 at 1:42 PM, yvesvidal said: Are you a jeweler by trade? This is amazing. Yves Expand Thank you for your appreciation. mtaylor 1
Bitao Posted March 27, 2020 Author #75 Posted March 27, 2020 On 3/26/2020 at 8:52 PM, Tony Hunt said: It really is. I struggle to make full-size furniture that nice! Expand Thank you for your appreciation. mtaylor 1
SJSoane Posted March 27, 2020 #76 Posted March 27, 2020 hyw, outstanding work. This is as good as it gets. Like many others who have posted here, I would like to see more of your processes. We can call learn from you! Mark FriedClams, yvesvidal and mtaylor 3 Current build: HMS Bellona 74, ca. 1760, 1:64 http://modelshipworld.com/index.php?/topic/196-hms-bellona-by-sjsoane-scale-164-1760-as-designed/
Bitao Posted March 28, 2020 Author #77 Posted March 28, 2020 On 3/27/2020 at 5:22 PM, SJSoane said: hyw, outstanding work. This is as good as it gets. Like many others who have posted here, I would like to see more of your processes. We can call learn from you! Mark Expand Thank you for the compliment. There is no best. Only better. . . This forum will also let me learn more。
Bitao Posted March 28, 2020 Author #78 Posted March 28, 2020 Speedy, markus0412, BANYAN and 15 others 18
Bitao Posted April 1, 2020 Author #80 Posted April 1, 2020 wefalck, Peta_V, EricWilliamMarshall and 18 others 21
wefalck Posted April 1, 2020 #81 Posted April 1, 2020 Micro-joinery ! mtaylor, Tony Hunt, druxey and 1 other 4 wefalck panta rhei - Everything is in flux
paulsutcliffe Posted April 1, 2020 #82 Posted April 1, 2020 That is stunning, lovely work Regards Paul druxey 1 The clerk of the cheque's yacht of sheerness Current build HMS Sirius (1797) 1:48 scratch POF from NMM plans HMS Winchelsea by chuck 1:48 Cutter cheerful by chuck 1:48 Previous builds- Elidir - Thames steam barge Cutty Sark-Billings boats Wasa - billings boats Among others 😁
Tony Hunt Posted April 1, 2020 #83 Posted April 1, 2020 On 4/1/2020 at 6:38 AM, wefalck said: Micro-joinery ! Expand It really is amazing. mtaylor and druxey 2
FriedClams Posted April 2, 2020 #84 Posted April 2, 2020 Exquisite work - all of it. Everything is cut so cleanly and fits so perfectly. Gary mtaylor and druxey 2 Current Build Pelican Eastern-Rig Dragger Completed Scratch Builds Rangeley Guide Boat New England Stonington Dragger 1940 Auto Repair Shop Mack FK Shadowbox
Bitao Posted April 4, 2020 Author #85 Posted April 4, 2020 G.L., bruce d, Lord Nelson 59 and 12 others 15
Bitao Posted April 6, 2020 Author #86 Posted April 6, 2020 DmitriyMarkov, yvesvidal, JpR62 and 17 others 20
wefalck Posted April 6, 2020 #87 Posted April 6, 2020 (edited) Nothing looks more like the real thing than the real thing: love the charcoal in the stove Edited April 6, 2020 by wefalck bruce d, paulsutcliffe, mtaylor and 3 others 6 wefalck panta rhei - Everything is in flux
Bitao Posted April 6, 2020 Author #88 Posted April 6, 2020 On 4/6/2020 at 7:43 AM, wefalck said: Nothing looks more like the real thing than the real thing: love the charcoal in the stove Expand If there is, it's burnt meat... FriedClams, druxey, paulsutcliffe and 3 others 6
druxey Posted April 6, 2020 #89 Posted April 6, 2020 Superb craftsmanship here, folks! mtaylor, BANYAN and FriedClams 3 Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
Vladimir_Wairoa Posted April 9, 2020 #90 Posted April 9, 2020 im speachless spectacular ! KORTES and mtaylor 2
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now