Jump to content

Recommended Posts

And finaly ...

Maybe, if I find a way to make it more elegant ... Once upon a time ... Maybe

FB_IMG_1592677982416.thumb.jpg.139d02918ab00026f9811d9c73e4df8a.jpg659373509_IMG_20200620_2025592.thumb.jpg.ed45590fe979eed15331a7c92f1b9e37.jpgIMG_20200620_202637.thumb.jpg.0501dbfe087c02ac6743ef025357bf9b.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

What did you use for the hooks, Nenad?  You mentioned staples. They look very good.   Lovely photography.  As for another hobby... don't worry about it.  Hobbies sort themselves out.   I think I'm down to about 20 at this point.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Attempt No2. A bit more elegant, much stronger. Yesterday I made this from toothpick and 0,3mn wire, today from steel large paper clip and staples.

As usual with me, obviously there will be attempt No 3 as finalIMG_20200621_185249.thumb.jpg.68f7a8b0474369e57994f2f847cf3851.jpg

 

IMG_20200621_205409.thumb.jpg.46ff5921a30cbaad098bad517613a404.jpg

 

IMG_20200621_210054.thumb.jpg.4a4691a26f98e8c1a6c0bf632b524ee3.jpg

 

IMG_20200621_210738.thumb.jpg.ce35faf84d738e91413b6002f530d5e9.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Artempt no 3 (right)

More elegant and much better

But ... WITH MISTAKE !!!!

So, here we go again 😭😭😭

IMG_20200624_212532-01.thumb.jpeg.0062322335ed55c213d267e1e9b691e4.jpeg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Atttempt No 4. and that is final solution. I just can't do it better. (for now 😁).

Top and the bottom are soldered, another little beadt are glued with CA. Acryl paint will harden all structure.

All made from brass wire 1mm and 0,3mm.IMG_20200626_193235-01.thumb.jpeg.4ad7cd5b84b1bbeebfa46372c1337782.jpeg

 

IMG_20200626_193235-01.thumb.jpeg.4ad7cd5b84b1bbeebfa46372c1337782.jpeg

 

IMG_20200626_195442_290.thumb.jpg.f7010f30a84d05ef7458ecbd82a397f7.jpg

IMG_20200626_193315-01.jpeg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

On 6/26/2020 at 8:06 PM, NenadM said:

Atttempt No 4. and that is final solution. I just can't do it better. (for now 😁).

Top and the bottom are soldered, another little beadt are glued with CA. Acryl paint will harden all structure.

All made from brass wire 1mm and 0,3mm.IMG_20200626_193235-01.thumb.jpeg.4ad7cd5b84b1bbeebfa46372c1337782.jpeg

 

IMG_20200626_193235-01.thumb.jpeg.4ad7cd5b84b1bbeebfa46372c1337782.jpeg

 

IMG_20200626_195442_290.thumb.jpg.f7010f30a84d05ef7458ecbd82a397f7.jpg

IMG_20200626_193315-01.jpeg

impressive with arrow Nenad in such small scale. your focus on tiny details is wow. Vlad 

Link to comment
Share on other sites

On 6/28/2020 at 4:35 PM, Vladimir_Wairoa said:

impressive with arrow Nenad in such small scale. your focus on tiny details is wow. Vlad 

Thank you, Vlad. As I said somewhere in this, I think, the slowest build on MSW log, couple of years ago, I made terrible mistakes with lines of main deck, so, I decided to overdetail Her Majesty, to try to "pull up" whole thing. That approach lead me to this ... ant work ... (which is, really - nothing, comparing what, for instance, MSW member Igor Sky do!!!!)

However, it is fun to test your own limits, and to learn.

Thank you for watching and following

 

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

50 minutes ago, NenadM said:

Thank you, Vlad. As I said somewhere in this, I think, the slowest build on MSW log, couple of years ago, I made terrible mistakes with lines of main deck, so, I decided to overdetail Her Majesty, to try to "pull up" whole thing. That approach lead me to this ... ant work ... (which is, really - nothing, comparing what, for instance, MSW member Igor Sky do!!!!)

However, it is fun to test your own limits, and to learn.

Thank you for watching and following

 

Your ant work is beautiful and interesting in many ways thanks for sharing it. i did make crucial miatakes on my path and i am not shy to admit it. why should i be? i dont like taking this hobby as some kind of competition in the moment i do passion and fun dies for me. im happy i can elarn from skilled ones but i think boat of everyone is just bwutiful in its own artisticalyl and technically way because everyone is different. fair wind to our cape horners :);) Vlad 

Link to comment
Share on other sites

Devil is not sleeping ... or just retrograde Mercury ( who believe in Zodiac ... I do not ... until now ... still do not ... but ... )

Flood in the kitchen with 150 liters of water on the wooden floor ... a real party ... so Her Majesty is gonna rest a while until I finish this show and repair all damage

See you soon, folks

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

That is not a post to like, my friend.    I hope there's not too much damage.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

  • 2 weeks later...

Sorry to hear about the water!!

 

Very nice work on the ship!!  I'm always inspired seeing your creativity!

 

best wishes

marc

Link to comment
Share on other sites

  • 7 months later...

Hello to all

Just to say Hi, and to declare that I am still live and here. We were all without Covid for now.

After flood, things go out of control. All of works lasted about two months, and finished with 3 loong weeks in September, litterary laying whole day with terrible back pain, and next 3 months with medium pains ... there are some things ( moving cabinets and furniture alone by myself) that I still can do (in my 62 years), but I COULD NOT do that any more ... learned on really harder way ... 

So, any work except light office work was unpossible for me to do, considering home works. Even vacum cleaning returned me to bed. 

Last two months it seems that I am 90% recovered, so I hope to continue with yards and masts. And with vacum cleaning :D

In mean time, Hot-head passed his very last bachelor exame on Architecture Faculty, and there is only bachelor thesis to do, AND THIS IS THE END OF HIS STUDY !!!! 

Be well and safe, my friends!

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Sorry to hear of your back pain issues Nenad, but glad to see you back posting again. Hope your health continues to improve.

Edited by gjdale
Link to comment
Share on other sites

Good to see you again, Nenad.   And good that the back pain is easing along with news of Hot-Head.    Stay safe and I hope the Covid stays away.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

nice to hear from you again, 

Link to comment
Share on other sites

And ... bowsprit is hereIMG_20210223_205444.thumb.jpg.740ef5480c495707dd043d401e6fa684.jpgIMG_20210223_212108.thumb.jpg.17b6499930752258e65943496e7ed118.jpgIMG_20210223_212132.thumb.jpg.605ac8fed3d4d2ad6a7de16c6abc0d74.jpgIMG_20210223_212136.thumb.jpg.f30ab8ef6575c8a1fedfd474420557e3.jpgIMG_20210223_212148_1.thumb.jpg.2a5d779502558d3e5b2ecc64eccc9f43.jpgIMG_20210223_212154.thumb.jpg.dcfe0ade4178cbfd6b51edbd4bcc641b.jpg

Screenshot_2021-02-23-21-30-18-466_com.google.android.apps.docs.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

  • 1 month later...

Masts - moving forward

Bez naslova.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Lower main mast. Mistake 1/100 mm 😁

I can live with that

IMG_20210419_202312.thumb.jpg.a01d823e2cc384e55c6e26e8b0ba2764.jpgIMG_20210419_202244.thumb.jpg.6642d072bc9e7953bd71a59abf595476.jpgIMG_20210419_202205.thumb.jpg.39616ed2fe46c6e8450bb5ca62dc1ed9.jpgIMG_20210419_202046.thumb.jpg.d9f4754eee80c7c628f1cc425aa62452.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

And lower fore mast base is done

 

IMG_20210420_182812-01.thumb.jpeg.080ea23194becd7b3b15c863c02b988e.jpeg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

3 minutes ago, Bruma said:

Good to see you back on your model! Keep going! 

Than you, and wellcome to my journey. Day is short for my chatacter (monkey see monkey do) and for my 100 hobbies, office work, home work garden work and social life. I hope I'll have time to move forward faster. But, there are always chalenges arround, such a this song I deadly want to know to play and singIMG-2dd3dda28ba0592219cc7656829efe63-V.thumb.jpg.ad65de2b1da37d3515526df922f8f8ac.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Shipyard or walking today?

Walking with Rhea on Belgrade Lake

And sunset was ... golden!

Photos are takwn by cell phoneIMG_20210421_180228-01.thumb.jpeg.d57eeae5f8df3cbf85909800772dea23.jpeg

 

IMG_20210421_182705-01.thumb.jpeg.66e1812b89e9fae10b6a2157f7e46ca7.jpeg

 

IMG_20210421_191657-01.thumb.jpeg.984f8ef19aaeeb51d99c0dbec9048d5a.jpeg

 

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Good choice, Nenad.  Days like that seem to be rare but worth the effort go out and enjoy them.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

On 4/23/2021 at 12:31 AM, mtaylor said:

Good choice, Nenad.  Days like that seem to be rare but worth the effort go out and enjoy them.

 

Hi dear friend, you are right, as usual ;)

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

 

 

Finaly, one day worm enough to do some bussiness out of flat. Until lunch, I was doing homeworks (londery, cleaning, cooking, grooming Rhea etc etc) and some yard-works (cuttung pampas and another grass, taking out flower pots from rooms to terace etc etc), with plan to go with her to a loong walk over Belgrade Searhea.thumb.jpg.4392316694cd2f4814960c8628c0e066.jpg

 

But, fortunately or not, as a consequence of issolation during my Covid sheet, I was so tired, that I quit from that idea pretty easy. Take a little nap, a nd a long rest with some ness coffee, and decided to finish neccessary paper works to go forward with my model. So, daily plans were converted toward Her Majesty`s needs, and after three hours of "playing" with Adobe Illustrator CS6, working plans with shape and right dimensions for all three masts and all nine parts of them are finished.

 

And I can say, we are on a god path to upper works above deck

 

21441195_Beznaslova.thumb.png.89889bbfd43205a53ff3b96ae39858b8.png 

 

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

And the third - done!

IMG_20210428_204324.thumb.jpg.1375d8989a979170c4d75fd54eeb06ce.jpg

As usual, with some bussines trip ... and awarded photo in one FB photo group made on trip

FB_IMG_1619586984267.jpg.770fbfb433c25925dd844258ab893a14.jpg

 

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Just to mention ... since I don't have a lathe, I get the conical shape of the mast by improvisation - I put a measured piece of wooden stick in the jaw of the drill, and then at low speed, using knives and sandpaper, imitating the lathe, and peel the wood to the required dimensions. Accurate diameter measurement to 1/10 mm at every step is implied.
Ah, that smell of sawdust and wood dust ...

Idea is to finish in wood all nine parts of masts, and after that to "dress" them with all miniature parts, and to paint them all in same way.

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

You have a good plan, Nenad.   I'm looking forward to more updates on this beauty.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

I couldn't stand it ... always around Easter, fake wooden eggs appear, just born for playing with engraving ...
And so ... instead of continuing with the masts, Nenad played and engraved his own fingers,  and one of this little eggs. All in all, useful as a one of lessons toward serious engraving exercise, that awaits me when the figure-head comes to line180450456_10214367356897116_7675859266788187268_n.thumb.jpg.ae64d789364bc02f4079a581612c1307.jpg181213883_10214385549231913_1683639850688369602_n.thumb.jpg.e91dadbb3ba7189660a5b4254f9247d3.jpg181237052_10214385550431943_3246000713995258006_n.thumb.jpg.d9a5a5f7480325a8ed969576ea79952d.jpg181249873_10214385549551921_8939972395911500658_n.jpg.c8f1c607e6cebc55753239fa5a75bf07.jpg181788223_10214385549791927_520104472471469286_n.thumb.jpg.08fc95128fc3b3a2a59c9c768e21d95c.jpg

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...