Jump to content

Charles Martel by Haze Gray - 1/72 scale - RADIO - 3D printed - French Battleship


Recommended Posts

Joe - I will echo CDW. I have recently retired after 44 years in the IT industry. So I do understand the technology side, and I enjoy it. I should also mention that my modeling skills are not what I would hope for. I often substitute power tools for skill. So spending time in front of the computer seems normal to me. (just ask my wife) :). I have spent the last 4 months learning Fusion and 3D printing. I am very impressed with the opportunities this gives me. Now it is hard to say where I spend more time. We will see as I progress.

Current Builds - 18th Century Longboat, MS Syren

Completed Builds - MS Bluenose, Panart BatteStation Cross section, Endevour J Boat Half Hull, Windego Half Hull, R/C T37 Breezing Along, R/C Victoria 32, SolCat 18

On the shelf - Panart San Felipe, Euromodel Ajax, C.Mamoli America, 

 

Its a sailor's Life for me! :10_1_10:

Link to comment
Share on other sites

To Joe and CDW,  I think what got me interested 3D printing boats was that I didn’t have a lot of time, tools, or experience building boats. So learning the software seemed like the best path forward and I could also afford to make mistakes because I could correct them in the software, or I could identify them more easily at least.  

 

The other thing is that designing the the boats in software would allow me to do is release the designs into the public domain when I no longer have use for them,  which in the end kinda good for everyone who wants to print a boat like the ones I work on. 

My Current Builds:

The USS Maine - 1/72 3D printed Armored Cruiser (1889) USS OlympiaUSS TexasUSS New York, HSwMS TapperhetenCerbere 

 

Ships I am currently designing or have completed in Fusion 360:

German: SMS ScharnhorstSMS Kaiser Sweden: Svea, Gota, & Thule (both early and later versions), Flygia

France: French battleship Charles MartelDupuy de Lôme, Faucon (aviso), United States: USS Katahdin (1894) Ram ship, USS Monteray USS Oregon Japan: Mikasa, Fuso Russia: Izumrud, Novgorod Spain: Pelayo Great Britian: Turbinia (1894) - First ship with Steam TurbineHMS Edinburgh (1882) DenmarkTordenskjold

 

Ships I intend on designing & building in the future:

French JauréguiberryMassena Bouvet United StatesUSS Virginia USS Brooklyn, USS Minneapolis USS Ericsson
Russian:  Rossiya Peresvet Bayan SlavaTsesarevich 
BrazilRiachuelo SpainEmparador Carlos V


 

Link to comment
Share on other sites

I applaud you for what you're doing, HG. The finished results of your work is very impressive and i am sure there are people like me who would buy your files once you are ready to do that. There's no reason you shouldn't earn something in return for all the hard work you are putting into making these a workable 3D printing project.

My friend has often mention the Thingyverse site you mentioned in another post. He's found many useful files there. The RC aircraft files he paid for. He said the finished models are a tad on the heavy side for RC flight, but doable.  

Link to comment
Share on other sites

CDW - I suggest you friend also look at Shapeways.com. Cost is a bit higher but the quality is amazing.

Current Builds - 18th Century Longboat, MS Syren

Completed Builds - MS Bluenose, Panart BatteStation Cross section, Endevour J Boat Half Hull, Windego Half Hull, R/C T37 Breezing Along, R/C Victoria 32, SolCat 18

On the shelf - Panart San Felipe, Euromodel Ajax, C.Mamoli America, 

 

Its a sailor's Life for me! :10_1_10:

Link to comment
Share on other sites

19 minutes ago, fnkershner said:

CDW - I suggest you friend also look at Shapeways.com. Cost is a bit higher but the quality is amazing.

Yes, I have done that. But he is so tight with his money, he squeaks when he walks. Besides, I think because he is a computer engineer who works for a company who build complex component parts and systems, he enjoys playing around with his own 3D printing equipment and making improvements to it himself.  I am always kidding him about how much work he goes through with his RC flying models to just to keep the cost down a few bucks. 

Link to comment
Share on other sites

2 hours ago, fnkershner said:

CDW - I suggest you friend also look at Shapeways.com. Cost is a bit higher but the quality is amazing.

Interesting thing with shapeways, I uploaded a section of the hull from the USS Maine, one from the middle - lowest cost to print was over $1000, I guess size does matter above a certain threshold.  The Charles Martel hull is 20% wider than the Maine and the USS Brooklyn is even longer than the Martel.  

My Current Builds:

The USS Maine - 1/72 3D printed Armored Cruiser (1889) USS OlympiaUSS TexasUSS New York, HSwMS TapperhetenCerbere 

 

Ships I am currently designing or have completed in Fusion 360:

German: SMS ScharnhorstSMS Kaiser Sweden: Svea, Gota, & Thule (both early and later versions), Flygia

France: French battleship Charles MartelDupuy de Lôme, Faucon (aviso), United States: USS Katahdin (1894) Ram ship, USS Monteray USS Oregon Japan: Mikasa, Fuso Russia: Izumrud, Novgorod Spain: Pelayo Great Britian: Turbinia (1894) - First ship with Steam TurbineHMS Edinburgh (1882) DenmarkTordenskjold

 

Ships I intend on designing & building in the future:

French JauréguiberryMassena Bouvet United StatesUSS Virginia USS Brooklyn, USS Minneapolis USS Ericsson
Russian:  Rossiya Peresvet Bayan SlavaTsesarevich 
BrazilRiachuelo SpainEmparador Carlos V


 

Link to comment
Share on other sites

6 hours ago, Haze Gray said:

Interesting thing with shapeways, I uploaded a section of the hull from the USS Maine, one from the middle - lowest cost to print was over $1000, I guess size does matter above a certain threshold.  The Charles Martel hull is 20% wider than the Maine and the USS Brooklyn is even longer than the Martel.  

That's mucho incentive to do it yourself. :)

Link to comment
Share on other sites

I should have an update with another section of the hull tonight. I’ve already come up with some ideas how to make things work better for printing large hulls and look forward to sharing.

My Current Builds:

The USS Maine - 1/72 3D printed Armored Cruiser (1889) USS OlympiaUSS TexasUSS New York, HSwMS TapperhetenCerbere 

 

Ships I am currently designing or have completed in Fusion 360:

German: SMS ScharnhorstSMS Kaiser Sweden: Svea, Gota, & Thule (both early and later versions), Flygia

France: French battleship Charles MartelDupuy de Lôme, Faucon (aviso), United States: USS Katahdin (1894) Ram ship, USS Monteray USS Oregon Japan: Mikasa, Fuso Russia: Izumrud, Novgorod Spain: Pelayo Great Britian: Turbinia (1894) - First ship with Steam TurbineHMS Edinburgh (1882) DenmarkTordenskjold

 

Ships I intend on designing & building in the future:

French JauréguiberryMassena Bouvet United StatesUSS Virginia USS Brooklyn, USS Minneapolis USS Ericsson
Russian:  Rossiya Peresvet Bayan SlavaTsesarevich 
BrazilRiachuelo SpainEmparador Carlos V


 

Link to comment
Share on other sites

Started working on the guns - going well considering I only have photos to work from - still need to work in details on the back of the turrents (hatches) and other stuff, but not alot of great photos out there, some are good but....but I'll take what I can get - it's amazing that there are as many photos as there are considering it was about 120 years ago!

 

Oh by the way,  some learning from time spent working on the USS Maine:  Hull first, place all the guns and pivot points and gears, put in the motors, mounts, and shafts,  servo pockets and battery compartments, and then work out where you can put servo and linkages for the turret tramming!  (at least that's my current theory on the sequence)

 

martelstart16.png

martelstart17.png

Edited by Haze Gray
added some notes

My Current Builds:

The USS Maine - 1/72 3D printed Armored Cruiser (1889) USS OlympiaUSS TexasUSS New York, HSwMS TapperhetenCerbere 

 

Ships I am currently designing or have completed in Fusion 360:

German: SMS ScharnhorstSMS Kaiser Sweden: Svea, Gota, & Thule (both early and later versions), Flygia

France: French battleship Charles MartelDupuy de Lôme, Faucon (aviso), United States: USS Katahdin (1894) Ram ship, USS Monteray USS Oregon Japan: Mikasa, Fuso Russia: Izumrud, Novgorod Spain: Pelayo Great Britian: Turbinia (1894) - First ship with Steam TurbineHMS Edinburgh (1882) DenmarkTordenskjold

 

Ships I intend on designing & building in the future:

French JauréguiberryMassena Bouvet United StatesUSS Virginia USS Brooklyn, USS Minneapolis USS Ericsson
Russian:  Rossiya Peresvet Bayan SlavaTsesarevich 
BrazilRiachuelo SpainEmparador Carlos V


 

Link to comment
Share on other sites

This is the most complex Fusion drawing I have seen so far! Lots of great work.

Current Builds - 18th Century Longboat, MS Syren

Completed Builds - MS Bluenose, Panart BatteStation Cross section, Endevour J Boat Half Hull, Windego Half Hull, R/C T37 Breezing Along, R/C Victoria 32, SolCat 18

On the shelf - Panart San Felipe, Euromodel Ajax, C.Mamoli America, 

 

Its a sailor's Life for me! :10_1_10:

Link to comment
Share on other sites

More work done last night - lots of tweaking required (and probably a little more to do) but thanks two key photos I was able to get some satisfactory work done on the mid-beam heavy gun turrets.  I'm struggling to find a photo good enough to properly guide the porthole placement but that will be coming after I get the last 4 turrets in.  Part of me is toying with the idea of motorizing (is that a word?) of the portholes to open and close - could be done but would need to likely use a flexible carbon fiber rod that could follow the contours of the hull - haven't quite worked it out but I have an idea of how it could be done,  just not refined enough. 

 

Anyways - included a picture of the "business end" of the Charles Martel along with a shot of the interior components - very motivating!

 

By the way, the small notches near the waterline under the most forward turrets on either side are ports for the torpedoes!  

martelstart20.png

martelstart18.png

martelstart19.png

My Current Builds:

The USS Maine - 1/72 3D printed Armored Cruiser (1889) USS OlympiaUSS TexasUSS New York, HSwMS TapperhetenCerbere 

 

Ships I am currently designing or have completed in Fusion 360:

German: SMS ScharnhorstSMS Kaiser Sweden: Svea, Gota, & Thule (both early and later versions), Flygia

France: French battleship Charles MartelDupuy de Lôme, Faucon (aviso), United States: USS Katahdin (1894) Ram ship, USS Monteray USS Oregon Japan: Mikasa, Fuso Russia: Izumrud, Novgorod Spain: Pelayo Great Britian: Turbinia (1894) - First ship with Steam TurbineHMS Edinburgh (1882) DenmarkTordenskjold

 

Ships I intend on designing & building in the future:

French JauréguiberryMassena Bouvet United StatesUSS Virginia USS Brooklyn, USS Minneapolis USS Ericsson
Russian:  Rossiya Peresvet Bayan SlavaTsesarevich 
BrazilRiachuelo SpainEmparador Carlos V


 

Link to comment
Share on other sites

  • 4 weeks later...

Thought I would provide an update - it's been about 3 weeks since I posted and mostly I've been working on three other ships since I needed to take a brake from the Charles Martel - so tonight I spent about 3 wonderful hours on the boat this evening and I can tell you this is one fun boat to build (and challenging too).  About 1.5 hours was spent on just examine photographs and double and triple checking the shape of the two main turrets.  Pretty much all the photos of models I have seen have all the turrets round - which is incorrect, main and the large secondary are oblong to accommodate the long breach of the french barrels - I was even able to track down some engineering drawings to confirm.

 

so, all the turrets are in, now according to my own notes I am supposed to work on the propulsion and the pulleys for the tramming of the turrets. not as sexy as working on the superstructure - but once I get the internals done it will be a relief to have that behind me and I can attack the desk and the superstructure with complete abandon.   I've even been considering putting in the spiral staircases in the fighting masts and that has me thinking about what it would take to fork off what I have thus far and make a version that's visual model with one side of the hull open and the various internal decks with details of boilers and the steam engines... I built over plastic 100 models when I was a kid and kind of still have that itch about internal details being an important and pleasing commodity.

 

Anyways, enjoy the pics.

CM 2.png

CM 3.png

CM 4.png

My Current Builds:

The USS Maine - 1/72 3D printed Armored Cruiser (1889) USS OlympiaUSS TexasUSS New York, HSwMS TapperhetenCerbere 

 

Ships I am currently designing or have completed in Fusion 360:

German: SMS ScharnhorstSMS Kaiser Sweden: Svea, Gota, & Thule (both early and later versions), Flygia

France: French battleship Charles MartelDupuy de Lôme, Faucon (aviso), United States: USS Katahdin (1894) Ram ship, USS Monteray USS Oregon Japan: Mikasa, Fuso Russia: Izumrud, Novgorod Spain: Pelayo Great Britian: Turbinia (1894) - First ship with Steam TurbineHMS Edinburgh (1882) DenmarkTordenskjold

 

Ships I intend on designing & building in the future:

French JauréguiberryMassena Bouvet United StatesUSS Virginia USS Brooklyn, USS Minneapolis USS Ericsson
Russian:  Rossiya Peresvet Bayan SlavaTsesarevich 
BrazilRiachuelo SpainEmparador Carlos V


 

Link to comment
Share on other sites

I so wish I had your Fusion skills! Wow! I am about a year behind you. I am still struggling with projecting the frames onto the offset planes. From there the lofting is easy.

Current Builds - 18th Century Longboat, MS Syren

Completed Builds - MS Bluenose, Panart BatteStation Cross section, Endevour J Boat Half Hull, Windego Half Hull, R/C T37 Breezing Along, R/C Victoria 32, SolCat 18

On the shelf - Panart San Felipe, Euromodel Ajax, C.Mamoli America, 

 

Its a sailor's Life for me! :10_1_10:

Link to comment
Share on other sites

11 hours ago, fnkershner said:

I so wish I had your Fusion skills! Wow! I am about a year behind you. I am still struggling with projecting the frames onto the offset planes. From there the lofting is easy.

Ha!  I think it's more like my Fusion luck!   I've done 3 hulls after the Martel and they are not anywhere as good and here I thought I was improving. Lofting in Fusion 360 is like some kind of mystical art - I've noticed that sometimes the success of lofting depends on the angle you're viewing the model from (crazy!).  I'm starting to take a look at the Deftship software and if I can import a model from Deftship into Fusion I might actually try that route.

 

Also, I went with my standard 5mm hull wall thickness on the Martel - and wish I had gone with 7mm as the hull is a really big shell with a much smaller deck that is far from the keel - I should be able to go back and adjust the offset of the frames but that's not really possible - maybe the way I'm doing it is wrong but when I do a hull when I get done I've forced more than a few errors and while the loft result is good - the "mold" that created the hull is more or less destroyed in the process. 

My Current Builds:

The USS Maine - 1/72 3D printed Armored Cruiser (1889) USS OlympiaUSS TexasUSS New York, HSwMS TapperhetenCerbere 

 

Ships I am currently designing or have completed in Fusion 360:

German: SMS ScharnhorstSMS Kaiser Sweden: Svea, Gota, & Thule (both early and later versions), Flygia

France: French battleship Charles MartelDupuy de Lôme, Faucon (aviso), United States: USS Katahdin (1894) Ram ship, USS Monteray USS Oregon Japan: Mikasa, Fuso Russia: Izumrud, Novgorod Spain: Pelayo Great Britian: Turbinia (1894) - First ship with Steam TurbineHMS Edinburgh (1882) DenmarkTordenskjold

 

Ships I intend on designing & building in the future:

French JauréguiberryMassena Bouvet United StatesUSS Virginia USS Brooklyn, USS Minneapolis USS Ericsson
Russian:  Rossiya Peresvet Bayan SlavaTsesarevich 
BrazilRiachuelo SpainEmparador Carlos V


 

Link to comment
Share on other sites

Have you tried Onscape. I was talking to one of our better 3D print guys today. He says he has gone from Fusion to Onscape. Most of what he told me was over my head but it is just an idea.

Current Builds - 18th Century Longboat, MS Syren

Completed Builds - MS Bluenose, Panart BatteStation Cross section, Endevour J Boat Half Hull, Windego Half Hull, R/C T37 Breezing Along, R/C Victoria 32, SolCat 18

On the shelf - Panart San Felipe, Euromodel Ajax, C.Mamoli America, 

 

Its a sailor's Life for me! :10_1_10:

Link to comment
Share on other sites

9 hours ago, fnkershner said:

Have you tried Onscape. I was talking to one of our better 3D print guys today. He says he has gone from Fusion to Onscape. Most of what he told me was over my head but it is just an idea.

I’ve not heard or tried onshape, but I looked into it this a.m. seems there’s a lot of similarity with fusion 360 in terms of how one operates the program.  Watched a few videos comparing fusion and onshape- seems the recommendation for one or the other hinges on how invested you are in a platform.  

 

I plan plan to tinker with both onshape and deftship this weekend to see if they are easier to use and yield better results for hulls. 

My Current Builds:

The USS Maine - 1/72 3D printed Armored Cruiser (1889) USS OlympiaUSS TexasUSS New York, HSwMS TapperhetenCerbere 

 

Ships I am currently designing or have completed in Fusion 360:

German: SMS ScharnhorstSMS Kaiser Sweden: Svea, Gota, & Thule (both early and later versions), Flygia

France: French battleship Charles MartelDupuy de Lôme, Faucon (aviso), United States: USS Katahdin (1894) Ram ship, USS Monteray USS Oregon Japan: Mikasa, Fuso Russia: Izumrud, Novgorod Spain: Pelayo Great Britian: Turbinia (1894) - First ship with Steam TurbineHMS Edinburgh (1882) DenmarkTordenskjold

 

Ships I intend on designing & building in the future:

French JauréguiberryMassena Bouvet United StatesUSS Virginia USS Brooklyn, USS Minneapolis USS Ericsson
Russian:  Rossiya Peresvet Bayan SlavaTsesarevich 
BrazilRiachuelo SpainEmparador Carlos V


 

Link to comment
Share on other sites

 

 

Whups wrong thread- deleted!

 

8CBA1399-A0E7-458A-96F7-DBF3AB6D9C5A.jpeg

Edited by Haze Gray
Wrong thread-deleted

My Current Builds:

The USS Maine - 1/72 3D printed Armored Cruiser (1889) USS OlympiaUSS TexasUSS New York, HSwMS TapperhetenCerbere 

 

Ships I am currently designing or have completed in Fusion 360:

German: SMS ScharnhorstSMS Kaiser Sweden: Svea, Gota, & Thule (both early and later versions), Flygia

France: French battleship Charles MartelDupuy de Lôme, Faucon (aviso), United States: USS Katahdin (1894) Ram ship, USS Monteray USS Oregon Japan: Mikasa, Fuso Russia: Izumrud, Novgorod Spain: Pelayo Great Britian: Turbinia (1894) - First ship with Steam TurbineHMS Edinburgh (1882) DenmarkTordenskjold

 

Ships I intend on designing & building in the future:

French JauréguiberryMassena Bouvet United StatesUSS Virginia USS Brooklyn, USS Minneapolis USS Ericsson
Russian:  Rossiya Peresvet Bayan SlavaTsesarevich 
BrazilRiachuelo SpainEmparador Carlos V


 

Link to comment
Share on other sites

  • 2 years later...

If the cross section that you show for Charles Martel above reflects the actual ship she must have had serious stability problems.  The circular cross section below the waterline indicates low metacentric height as the center of buoyancy does not move off the centerline as the vessel heels.  Worse the extreme tumblehome means that she does not gain righting moment when heeling at larger angles.

 

Roger

Edited by Roger Pellett
Link to comment
Share on other sites

On 12/7/2020 at 4:31 PM, Yuuki said:

Wow,

Amazing model, is it possible in some form for me to purchase the model and make one myself? :)

Hi Yuuki, the model is designed at 1/72 scale and would be 1.6 meters long - are you looking for a project that big?

My Current Builds:

The USS Maine - 1/72 3D printed Armored Cruiser (1889) USS OlympiaUSS TexasUSS New York, HSwMS TapperhetenCerbere 

 

Ships I am currently designing or have completed in Fusion 360:

German: SMS ScharnhorstSMS Kaiser Sweden: Svea, Gota, & Thule (both early and later versions), Flygia

France: French battleship Charles MartelDupuy de Lôme, Faucon (aviso), United States: USS Katahdin (1894) Ram ship, USS Monteray USS Oregon Japan: Mikasa, Fuso Russia: Izumrud, Novgorod Spain: Pelayo Great Britian: Turbinia (1894) - First ship with Steam TurbineHMS Edinburgh (1882) DenmarkTordenskjold

 

Ships I intend on designing & building in the future:

French JauréguiberryMassena Bouvet United StatesUSS Virginia USS Brooklyn, USS Minneapolis USS Ericsson
Russian:  Rossiya Peresvet Bayan SlavaTsesarevich 
BrazilRiachuelo SpainEmparador Carlos V


 

Link to comment
Share on other sites

On 12/7/2020 at 4:47 PM, Roger Pellett said:

If the cross section that you show for Charles Martel above reflects the actual ship she must have had serious stability problems.  The circular cross section below the waterline indicates low metacentric height as the center of buoyancy does not move off the centerline as the vessel heels.  Worse the extreme tumblehome means that she does not gain righting moment when heeling at larger angles.

 

Roger

Yes a lot of the French tumblehome designs suffered from a range of stability issues.  They added a couple of really tall, really heavy military masts which would have made for some real fun!

My Current Builds:

The USS Maine - 1/72 3D printed Armored Cruiser (1889) USS OlympiaUSS TexasUSS New York, HSwMS TapperhetenCerbere 

 

Ships I am currently designing or have completed in Fusion 360:

German: SMS ScharnhorstSMS Kaiser Sweden: Svea, Gota, & Thule (both early and later versions), Flygia

France: French battleship Charles MartelDupuy de Lôme, Faucon (aviso), United States: USS Katahdin (1894) Ram ship, USS Monteray USS Oregon Japan: Mikasa, Fuso Russia: Izumrud, Novgorod Spain: Pelayo Great Britian: Turbinia (1894) - First ship with Steam TurbineHMS Edinburgh (1882) DenmarkTordenskjold

 

Ships I intend on designing & building in the future:

French JauréguiberryMassena Bouvet United StatesUSS Virginia USS Brooklyn, USS Minneapolis USS Ericsson
Russian:  Rossiya Peresvet Bayan SlavaTsesarevich 
BrazilRiachuelo SpainEmparador Carlos V


 

Link to comment
Share on other sites

I did some more work on the Charles Martel last night - good to get back to it.  I have a bunch of boats that I'm working on so they often compete for my time 😃

 

 

cm20202.png

many ships.png

My Current Builds:

The USS Maine - 1/72 3D printed Armored Cruiser (1889) USS OlympiaUSS TexasUSS New York, HSwMS TapperhetenCerbere 

 

Ships I am currently designing or have completed in Fusion 360:

German: SMS ScharnhorstSMS Kaiser Sweden: Svea, Gota, & Thule (both early and later versions), Flygia

France: French battleship Charles MartelDupuy de Lôme, Faucon (aviso), United States: USS Katahdin (1894) Ram ship, USS Monteray USS Oregon Japan: Mikasa, Fuso Russia: Izumrud, Novgorod Spain: Pelayo Great Britian: Turbinia (1894) - First ship with Steam TurbineHMS Edinburgh (1882) DenmarkTordenskjold

 

Ships I intend on designing & building in the future:

French JauréguiberryMassena Bouvet United StatesUSS Virginia USS Brooklyn, USS Minneapolis USS Ericsson
Russian:  Rossiya Peresvet Bayan SlavaTsesarevich 
BrazilRiachuelo SpainEmparador Carlos V


 

Link to comment
Share on other sites

You did that on purpose. You just wanted me to drool on my keyboard!

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Link to comment
Share on other sites

8 minutes ago, reklein said:

The Charles Martel has a real stem punk look to it.

Yeah a lot of the French ships have that steampunk flaBrest13-10-13-08.thumb.jpg.f62b3d166698b5ecd3511b714c12ad8d.jpgre to them (Pic is of the 'Devastation ')

My Current Builds:

The USS Maine - 1/72 3D printed Armored Cruiser (1889) USS OlympiaUSS TexasUSS New York, HSwMS TapperhetenCerbere 

 

Ships I am currently designing or have completed in Fusion 360:

German: SMS ScharnhorstSMS Kaiser Sweden: Svea, Gota, & Thule (both early and later versions), Flygia

France: French battleship Charles MartelDupuy de Lôme, Faucon (aviso), United States: USS Katahdin (1894) Ram ship, USS Monteray USS Oregon Japan: Mikasa, Fuso Russia: Izumrud, Novgorod Spain: Pelayo Great Britian: Turbinia (1894) - First ship with Steam TurbineHMS Edinburgh (1882) DenmarkTordenskjold

 

Ships I intend on designing & building in the future:

French JauréguiberryMassena Bouvet United StatesUSS Virginia USS Brooklyn, USS Minneapolis USS Ericsson
Russian:  Rossiya Peresvet Bayan SlavaTsesarevich 
BrazilRiachuelo SpainEmparador Carlos V


 

Link to comment
Share on other sites

Thought I'd make a bit more progress before turning in 

cm20202a.png

My Current Builds:

The USS Maine - 1/72 3D printed Armored Cruiser (1889) USS OlympiaUSS TexasUSS New York, HSwMS TapperhetenCerbere 

 

Ships I am currently designing or have completed in Fusion 360:

German: SMS ScharnhorstSMS Kaiser Sweden: Svea, Gota, & Thule (both early and later versions), Flygia

France: French battleship Charles MartelDupuy de Lôme, Faucon (aviso), United States: USS Katahdin (1894) Ram ship, USS Monteray USS Oregon Japan: Mikasa, Fuso Russia: Izumrud, Novgorod Spain: Pelayo Great Britian: Turbinia (1894) - First ship with Steam TurbineHMS Edinburgh (1882) DenmarkTordenskjold

 

Ships I intend on designing & building in the future:

French JauréguiberryMassena Bouvet United StatesUSS Virginia USS Brooklyn, USS Minneapolis USS Ericsson
Russian:  Rossiya Peresvet Bayan SlavaTsesarevich 
BrazilRiachuelo SpainEmparador Carlos V


 

Link to comment
Share on other sites

I'm starting to get into the part of the design where I have to lean more and more into what I can what I can understand based on the photos of the ship. There's really very little in the way of the original French designs for the structure above the main deck - sometimes I superimpose photos on the model to get a feel for how really was.  I stared at 5 different images for 2 hours looking at the superstructure from different perspectives - there no way I can be 100% sure I'm working in the right direction I just tweak details as I go along and check and double check as I move forward.  

cm20201216.png

 

cm20201216a.png

Edited by Haze Gray

My Current Builds:

The USS Maine - 1/72 3D printed Armored Cruiser (1889) USS OlympiaUSS TexasUSS New York, HSwMS TapperhetenCerbere 

 

Ships I am currently designing or have completed in Fusion 360:

German: SMS ScharnhorstSMS Kaiser Sweden: Svea, Gota, & Thule (both early and later versions), Flygia

France: French battleship Charles MartelDupuy de Lôme, Faucon (aviso), United States: USS Katahdin (1894) Ram ship, USS Monteray USS Oregon Japan: Mikasa, Fuso Russia: Izumrud, Novgorod Spain: Pelayo Great Britian: Turbinia (1894) - First ship with Steam TurbineHMS Edinburgh (1882) DenmarkTordenskjold

 

Ships I intend on designing & building in the future:

French JauréguiberryMassena Bouvet United StatesUSS Virginia USS Brooklyn, USS Minneapolis USS Ericsson
Russian:  Rossiya Peresvet Bayan SlavaTsesarevich 
BrazilRiachuelo SpainEmparador Carlos V


 

Link to comment
Share on other sites

On 12/17/2020 at 5:52 PM, Haze Gray said:

I'm starting to get into the part of the design where I have to lean more and more into what I can what I can understand based on the photos of the ship. There's really very little in the way of the original French designs for the structure above the main deck - sometimes I superimpose photos on the model to get a feel for how really was.  I stared at 5 different images for 2 hours looking at the superstructure from different perspectives - there no way I can be 100% sure I'm working in the right direction I just tweak details as I go along and check and double check as I move forward.  

cm20201216.png

 

cm20201216a.png

Love the superstructure, made her a little top heavy but even more beautiful.

 

I’m sorry I have 0 knowledge regarding modeling softwares, but is it possible to make it a tad smaller to around 1:350 scale? :P

I have a friend who’s making the Massena in 1:350,  if that’s possible having 2 French pre-dreadnoughts on my shelf will make me very very happy indeed :D.

 

Link to comment
Share on other sites

10 hours ago, Yuuki said:

Love the superstructure, made her a little top heavy but even more beautiful.

 

I’m sorry I have 0 knowledge regarding modeling softwares, but is it possible to make it a tad smaller to around 1:350 scale? :P

I have a friend who’s making the Massena in 1:350,  if that’s possible having 2 French pre-dreadnoughts on my shelf will make me very very happy indeed :D.

 

Hi Yuuki, I don’t think scaling it down to 1/350 would work well - some of the features are thin like 1mm so at 1/350 scale that becomes ~0.2mm.  It might be possible with a resin printer do you have one of those?

My Current Builds:

The USS Maine - 1/72 3D printed Armored Cruiser (1889) USS OlympiaUSS TexasUSS New York, HSwMS TapperhetenCerbere 

 

Ships I am currently designing or have completed in Fusion 360:

German: SMS ScharnhorstSMS Kaiser Sweden: Svea, Gota, & Thule (both early and later versions), Flygia

France: French battleship Charles MartelDupuy de Lôme, Faucon (aviso), United States: USS Katahdin (1894) Ram ship, USS Monteray USS Oregon Japan: Mikasa, Fuso Russia: Izumrud, Novgorod Spain: Pelayo Great Britian: Turbinia (1894) - First ship with Steam TurbineHMS Edinburgh (1882) DenmarkTordenskjold

 

Ships I intend on designing & building in the future:

French JauréguiberryMassena Bouvet United StatesUSS Virginia USS Brooklyn, USS Minneapolis USS Ericsson
Russian:  Rossiya Peresvet Bayan SlavaTsesarevich 
BrazilRiachuelo SpainEmparador Carlos V


 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...