-
Posts
9,532 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by ccoyle
-
Nice work, Nils! Pilot schooners make handsome projects.
- 180 replies
-
- pilot boat
- Elbe 5
-
(and 3 more)
Tagged with:
-
I always use a fresh #11 blade for the task. I do the job freehand, and I don't try to cut all the way through the card on the first pass -- score the cut first, then cut through on the second pass. On the curved section I use a jigsaw-like motion using only the tip of the blade and pushing the blade forward instead of drawing it back. I should add that although I have been using the Evergreen Canopy Glue for most of this build, I did not use it for seating the channels, since that task requires more working time to get everything seated properly. I used Aleen's Clear for the job.
-
Some goodies arrived in the mail today. These are 3D-printed detail parts from Darius Lipinski, the kit's designer. I have already added the paper versions of some of these parts to the model, but the printed parts are so nice that I might just be tempted to see if I can safely remove some of those paper parts and replace them. So, what have we got? Vents, valves, life rings, hoses, binnacle, signaling lamps, directors. Anchors, bitts, fairleads. And finally, armament: 20 mm mounts, barrels for 3" and 1.1" guns, torpedoes, and hedgehog bombs. This build will probably go back on the bench after I complete the 109 build.
-
Further progress: First the penultimate nose skin was added to the fuselage. The last skin consisted of two pieces, which I chose to join together first before adding them to the fuselage. The last frame was also added to this piece. Then that structure was added to the fuselage. The fit so far has been no problem. The letters WPS indicate sections that are to be cut out after the part has been glued. These are of course the machine gun channels. Those portions were duly removed, and the parts for the channels were prepped. And here's the finished channels. That's all for now!
-
Witam, Wieslaw! I saw your ORP Piorun model in the gallery -- a very high level of craftsmanship. Thanks for sharing!
-
A nice milestone moment in the construction of a plane is getting the first outer skin on. On some Halinski builds, I have had a lot of issues with the inner cockpit skins not fitting correctly -- they must align precisely and have no gaps at the seams, otherwise the outer skins won't fit either. Fortunately, this time around only some light sanding was needing to achieve the desired inner skin fit, and the outer skin thus went on without a hitch. The nose frames were then assembled and mated to the cockpit section. You can see that there is a substantial amount of substructure. After adding one more fuselage skin (it fit perfectly and won't even require any seam touch-ups), it's time to work on the nose. The Emil had a rather lumpy, bumpy nose (a characteristic that was addressed in the 109F), and that is reflected in the jigsaw puzzle-like nose assembly sequence for the model. Patience will be the order of the day!
-
Anyone out there working on a card model?
ccoyle replied to gagliano1770's topic in Card and Paper Models
Me, too -- but if I recall correctly, I have to go off-site to see the build log for this one (hint, hint). 🤨😉 -
Take a good look -- this is the last time you'll be able to clearly see all of the cockpit elements before everything gets closed up. Port side on the left, starboard on the right. The disparity in the number of controls on the two sides makes me wonder whether the Luftwaffe chose only right-handed pilots for fighter pilot duty. 🤔
-
1/200 Trumpeter IJN YAMATO - issued by MRC/Gallery Models
ccoyle replied to yvesvidal's topic in REVIEWS: Model kits
Just call it "market research."- 104 replies
-
- MRC/Gallery
- Yamato
-
(and 1 more)
Tagged with:
-
No, this was forty years ago.
-
That's really a striking model -- congratulations!
- 55 replies
-
- Nordlandsbaaden
- Billing Boats
-
(and 1 more)
Tagged with:
-
Hey, Greg. I just came across this thread. I had this kit back in the day, sans PE upgrades. Never got around to building it. I just saw a video about this aircraft a few weeks ago. The narrator mentioned that this aircraft had an unfortunate tendency to fling its cockpit crew forward into the spinning prop upon hard landings -- not a trait that endeared it much to its crews.
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.