ccoyle
-
Posts
9,527 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by ccoyle
-
I always use a fresh #11 blade for the task. I do the job freehand, and I don't try to cut all the way through the card on the first pass -- score the cut first, then cut through on the second pass. On the curved section I use a jigsaw-like motion using only the tip of the blade and pushing the blade forward instead of drawing it back. I should add that although I have been using the Evergreen Canopy Glue for most of this build, I did not use it for seating the channels, since that task requires more working time to get everything seated properly. I used Aleen's Clear for the job.- 165 replies
-
- 12
-
-
-
Very nice -- congratulations!
-
Some goodies arrived in the mail today. These are 3D-printed detail parts from Darius Lipinski, the kit's designer. I have already added the paper versions of some of these parts to the model, but the printed parts are so nice that I might just be tempted to see if I can safely remove some of those paper parts and replace them. So, what have we got? Vents, valves, life rings, hoses, binnacle, signaling lamps, directors. Anchors, bitts, fairleads. And finally, armament: 20 mm mounts, barrels for 3" and 1.1" guns, torpedoes, and hedgehog bombs. This build will probably go back on the bench after I complete the 109 build.
- 331 replies
-
- 20
-
-
Further progress: First the penultimate nose skin was added to the fuselage. The last skin consisted of two pieces, which I chose to join together first before adding them to the fuselage. The last frame was also added to this piece. Then that structure was added to the fuselage. The fit so far has been no problem. The letters WPS indicate sections that are to be cut out after the part has been glued. These are of course the machine gun channels. Those portions were duly removed, and the parts for the channels were prepped. And here's the finished channels. That's all for now!
- 165 replies
-
- 17
-
-
-
-
Witam, Wieslaw! I saw your ORP Piorun model in the gallery -- a very high level of craftsmanship. Thanks for sharing!
-
Next we have the oil cooler. It's a tiny bit lopsided, but considering how complex the structure is, I'm happy with it.
- 165 replies
-
- 20
-
-
It seems our Chinese friends are a little sensitive about displaying the Nationalist roundel, much like German kits are not allowed to include swastikas.
-
A nice milestone moment in the construction of a plane is getting the first outer skin on. On some Halinski builds, I have had a lot of issues with the inner cockpit skins not fitting correctly -- they must align precisely and have no gaps at the seams, otherwise the outer skins won't fit either. Fortunately, this time around only some light sanding was needing to achieve the desired inner skin fit, and the outer skin thus went on without a hitch. The nose frames were then assembled and mated to the cockpit section. You can see that there is a substantial amount of substructure. After adding one more fuselage skin (it fit perfectly and won't even require any seam touch-ups), it's time to work on the nose. The Emil had a rather lumpy, bumpy nose (a characteristic that was addressed in the 109F), and that is reflected in the jigsaw puzzle-like nose assembly sequence for the model. Patience will be the order of the day!
- 165 replies
-
- 19
-
-
Every time you step out in it, you can shout, "Release the kraken!"
-
Anyone out there working on a card model?
ccoyle replied to gagliano1770's topic in Card and Paper Models
Me, too -- but if I recall correctly, I have to go off-site to see the build log for this one (hint, hint). 🤨😉 -
Take a good look -- this is the last time you'll be able to clearly see all of the cockpit elements before everything gets closed up. Port side on the left, starboard on the right. The disparity in the number of controls on the two sides makes me wonder whether the Luftwaffe chose only right-handed pilots for fighter pilot duty. 🤔
- 165 replies
-
- 15
-
-
1/200 Trumpeter IJN YAMATO - issued by MRC/Gallery Models
ccoyle replied to yvesvidal's topic in REVIEWS: Model kits
Just call it "market research."- 104 replies
-
- 6
-
-
-
- MRC/Gallery
- Yamato
- (and 1 more)
-
The outboard wheel is for raising and lowering flaps; the inner wheel controls the elevator trim tabs.
- 165 replies
-
- 10
-
-
No, this was forty years ago.
-
That's really a striking model -- congratulations!
- 55 replies
-
- 1
-
-
- Nordlandsbaaden
- Billing Boats
- (and 1 more)
-
Hey, Greg. I just came across this thread. I had this kit back in the day, sans PE upgrades. Never got around to building it. I just saw a video about this aircraft a few weeks ago. The narrator mentioned that this aircraft had an unfortunate tendency to fling its cockpit crew forward into the spinning prop upon hard landings -- not a trait that endeared it much to its crews.
-
Wow! The Hellcat got selected as Picture of the Month at Paper Modelers. I was kind of shocked when I saw it there -- it's quite the honor.
- 150 replies
-
- 13
-
-
-
-
Bonjour, Alexandre, et bienvenue à MSW. Veuillez noter que MSW est un forum en anglais uniquement. Vous pouvez utiliser un traducteur en ligne si nécessaire. Pour tirer le meilleur parti de votre temps à MSW, veuillez lire nos directives de forum ici. Nous avons également un article qui explique comment utiliser les différentes fonctions de notre site. Parce que les modèles que vous souhaitez exposer ici sont des pièces finies, le meilleur endroit pour les exposer est dans notre galerie de modèles finis. Vous pouvez créer un dossier pour tous ensemble ou séparément pour chaque modèle. En attendant, je vais combiner vos publications récentes en un seul sujet et les déplacer dans votre introduction. Sincèrement, Chris Hello, Alexandre, and welcome to MSW. Please note that MSW is an English only forum. You can use an online translator if necessary. To get the most out of your time at MSW, please read our forum guidelines here. We also have an article that explains how to use the different functions of our site. Because the models you want to display here are finished pieces, the best place to display them is in our finished model gallery. You can create a folder for all together or separately for each model. In the meantime, I'll combine your recent posts into a single topic and move them into your introduction.
-
I always told my kids that if I bought a lottery ticket, I had a 1 in however many million chance of winning, but if I didn't buy a ticket I had a 1 in 1 chance of saving a dollar.
- 165 replies
-
- 12
-
-
Our Emblem ®
