Jump to content
New Publication - Ship Modeler's Handbook - They're back in stock! Thank you for your patience. ×

Timmo

Members
 View Profile  See their activity

  • Posts

    606

  • Joined

  • Last visited

 Content Type 

Everything posted by Timmo

  1. Timmo
    That would be a salute to the modeller from the gun crew, Doris.
  2. Timmo
    Nice work Jan. A top quality build.
  3. Timmo
    Thanks Jack, Dominic, there were a couple of victory/amiti Granadoes on the old MSW and I'm sure many would be interested to see the differences. How about a build log?
  4. Timmo
    Top work Ray. I think I'll be making some similar blocks with hooks now.
  5. Timmo
    Nice work kevin
  6. Timmo
    Brilliant work as ever Doris. The flags are spectacular while your skill with sculpting and construction is unbelievable.
  7. Timmo
    I'd laminated some profiled strip to the front face of the cheeks below the head rails in a burst of activity a few months back. The lamination lines were still visible and not that flash so some new upper and lower cheeks were knocked up from offcuts of the kit walnut cut and shaped to fit. The upper cheeks were made in two pieces with the join on one side. The profile was made with a file as per the others on a ship. The timber was varnished and the blue painted in and tidied up with a blade. The join between the upper cheeks and the head rail will be hidden by the gammoning holding the bowsprit down.
  8. Timmo
    Start and end points marked with dividers and drilled and the rest filled in, or cut out in this case, by eye. It's a short distance so you can get away with it,
  9. Timmo
    Thanks John. The Granado is a nice kit and a good second build. Be sure to post a build log of your first kit. Plenty of encouragement and advice from the fine people on this site.
  10. Timmo
    Yep, reasons why I went with timber were half aesthetics and half because I didn't like the thought of fitting that heavy brass to the right curve and then relying on ithe bond holding it to the timber. But many others have made it work
  11. Timmo
    The head rails depend on the cathead for positioning so they have to be knocked out and fitted first. The slots were cut with a jewellers saw. Sheaves were cut from styrene tube and an axle from brass rod. Painting, fitting and the cathead cleat next up.
  12. Timmo
    Wow slog, I haven't seen so much photo etch since my plastic modelling days nicely done.
  13. Timmo
    To make a pattern for the knees and head rails a rubbing of the chase port and sheer rail etc was made with a pencil. This was then used to draw in the correct shape for the knee and beginning of the upper head rail. The resulting shape was traced and cut to check it works for the other side. I've laminated some leftover 4mm kit walnut to make some pieces large enough to hopefully cut the knee and entire head rail in one piece, that's it for today. For our northern hemisphere friends it's too hot working in my garage even with a fan on and a refreshing beer close to hand, especially after a morning watching my daughters compete in a triathlon. Great stuff.
  14. Timmo
    Thanks for the suggestions Kester. I was fairly set on just moving the timber head but I can see now shaping the cathead knee and head rail properly will overcome the problem. I made some mock ups of the kit supplied cathead and head rails to get some idea of how it all should look. As can be seen there's no natural curve to them. It's pretty square.
  15. Timmo
    I'd be interested too Mick. The more people contributing the more opportunities to solve issues like this and help each other out.
  16. Timmo
    Top work Dan. Hard to believe it's the same ship. You're a man of your word sticking with this project.
  17. Timmo
    Always room for more sanding. Did you fit the foaming with the chimney in place? It'll help get a nice fit.
  18. Timmo
    Nice smooth first planking you've got there Eamonn. A great base for the next step. Keep it up.
  19. Timmo
    The head rails really take their starting point from the cat heads. Their positioning determines where the cathead knees run down vertically to the top head rail which runs out to the bow. Hence here's an issue which I spotted prior to packing Granado away a few months back - I chose to wilfully ignore it and hope it would sort itself out in the meantime. Unsurprisingly it's been waiting for me ever since. The chase port needs to be positioned far enough back to allow the cathead knee and head rail extension under it to run down from the cathead and clear the chase port like so on the instructions. On my Granado the chase port is too far forward by about 3-4mm it means the timber forming the knee and start of the head rail fouls the port. The port is yet to receive a door which means we need even more room. Here's what it would look like with the stock kit pieces. Clearly not enough room there. Craig and other builders beware and check those ports and shuffle the top rail with their timber head positions if needed. The port side has a little more room but options are: moving chase port ( all but impossible) Shaping cathead knees and head rails for each side so that they follow a natural line away from the port. (Possible but would not do well with symmetry when the hull and head rails are viewed from front. Remove one timber head from the top rail on each side to allow the cathead to move forward to clear the port. (looking the best option so far as there is nothing belayed to the timberhead which would go and few would notice, I'm for the simplest and best looking fix here as this kit was never going to be 100% accurate given my lack of info and skills for many bits.
  20. Timmo
    It's very good and highly recommended. The Granado is a fine model out of the box but I'm lucky enough that my local public library has a copy of AOTS so it's worth adding a few additions.
  21. Timmo
    Hi Bob, Just found your build. Great work you've done on a fine looking vessel. Keep it up.
  22. Timmo
    Thanks for the comments Kester. I like your Sherbourne, especially the gaff sail. I battled a long while with sails for mine before giving up as i could never get them o look right for the scale. with the head rails, those are next up once i get back into building. here's what the kit suggests: and here's what the anatomy of the ship has: the kit parts are from walnut ply and might take a bit of bending and shaping to ease a third dimension bend into them but i suspect remaking them will be the best option as i also want the profiled groove running through the centre of the rails as per AOTS and the previous rails I've done on Granado. As for the colour, yes the kit suggests blue but I'll keep it consistant with what i've done so far with a blue strip on the varnished timber. less is more.
  23. Timmo
    Looking good Craig. That white on the hull always shows up everything but you'll never regret the extra time spent filling it. Those blocks do look large. What size are they? I can't recall what size I used but they looked smaller than that. As you say it would be impossible to run the guns in all the way but it's not that noticeable once the foc'sle is on and belfry/windlass installed. Mick, without seeing pics it sounds like parts of the filler blocks need to be sanded back. Did you sand the bulkheads to fair them to the curve of the hull so the planks run smoothly across them and contact fully across the surface of the bulkhead? By the time you get near the bow quite a bit of material needs to come off the forward edge of the bulkheads to get a smooth run. There's some good basic tutorials on the site, or start a build log as that's the best way to get advice from the knowledgeable and supportive folk on MSW.
  24. Timmo
    Here's what's kept me from the Granado for the last few months: http://modelshipworld.com/index.php?/topic/1940-other-hobbies-interests-or-pastimes-that-you-enjoy/page-18 Hopefully now it's back to ship building with some fresh progress before all the other fine Granados here overtake me.
  25. Timmo
    Nice work Ferit, she's looking beautiful.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...