Jump to content

Mirabell61

Members
  • Posts

    7,324
  • Joined

  • Last visited

Posts posted by Mirabell61

  1. Update

     

    I`m planing to make and mount two awning-canvas-cloths on the bridge between wheelhouse and wing cabs. ( at least try to do it). Therefore each two rails with fastening eyes will be mounted. The wheelhouse ceiling is at the sametime also the planked monkey deck floor with the anchor bolt eyes for the front funnel stays. The railing to the monkey deck will be fitted later.

    Also there are now some short access ladders to the mid hold areas on the welldecks.

     

    Nils

    DSCI9799.thumb.JPG.e886a43bf62a9f94ead9acc67a7ac00e.JPG

     

    DSCI9801.thumb.JPG.0416984c43f872e55821da208a2fbe22.JPG

    monkey deck platform

    DSCI9802.thumb.JPG.a9b5d259fcf0e6878e177f9b65bdff05.JPG

    rails with fastening eyes

    DSCI9803.thumb.JPG.881995838ff9e274addb690775587deb.JPG

    rails with fastening eyes for the awning boltropes

    DSCI9804.thumb.JPG.84e1f7ddb67852999321428da31c8497.JPG

    short access- ladders to the mid hold areas

     

     

     

  2. Update

     

    wing cabs on the bridge mounted.....

     

    Nils

    DSCI9780.thumb.JPG.290231cc4491351d81c327cac4370308.JPG

    made from 0,8mm beech 3-layer ply

    DSCI9783.thumb.JPG.5f2a3de3b1d037174ff2ac2e83952e71.JPG

    typical outcuts

    DSCI9784.thumb.JPG.763421c0dbfe15d81d398adc88c7d6e1.JPG

     

    DSCI9787.thumb.JPG.fdf49ace40a29c0647799bb4c8e6f4e9.JPG

    inside reinforcements

    DSCI9789.thumb.JPG.ce28dd0a026d1ea79fcaee32ea52b2cc.JPG

    checking the shoreline

    DSCI9791.thumb.JPG.114c22dbb5425b16988f7af5f82d8918.JPG

    overview from above

    DSCI9792.thumb.JPG.9f6e1e7003fd08673e1b1ae2460d63fd.JPG

    new parts painted

    DSCI9793.thumb.JPG.a85e9446f6bf2a5ec136736e1d36d664.JPG

    rigging and antenna connected to the radio-cabin

    DSCI9301.thumb.JPG.f7e44c071cf7c07e43d385300a6e7de3.JPG

    Ergenstrasse from the movie,  bridge, front

    DSCI9308.thumb.JPG.f9e479e3000bf729a7e5a495dc129098.JPG

    bridge aft, without the sun protection awning

     

     

  3. Valeriy,

    thanks for sharing your technique in applying the "putty-belts".  I was`nt familiar with that methode before you showed it. You did a super job and its very inspiring and I asume it mut be a nice job for modelers who have experience and a steady hand with "Gips-Stuckarbeiten" structures. I am wondering if it may be possible to combine the way you do it and the way I usually do my hull metal-plating riveting

     

    Nils

  4. right Keith, thanks for your word,

    I`m on the final straight right now, but still a lot to do.

    when the bridge is done, there will be enough to do, so that I probably wo`nt make it before the new year. There are several awnings to be made and mounted, as well as the deck above the wheelhouse and it`s railing. also all the small stiffening out elbows  around the bridge super structure, the nav.lights, life saver rings, some lockers, etc ......

     

    Nils

  5. Update

     

    starting with the bridge wing-cabs today, (here card template) with those typical "Ergenstrasse-outcuts". Also the flagpost, the bollards, the Panama fairleads, the mast riggings and the radio short-wave antenna and the stairs are mounted

     

    Nils

    DSCI9772.thumb.JPG.8e7602758df0e8a490a5f75572aaf8cd.JPG

    Stb. side card dummy bridge wing-cab

    DSCI9773.thumb.JPG.b15be8620cc1ff5a132e11119f906428.JPG

    Bollards and Panama fairleads

    DSCI9774.thumb.JPG.9ff71c237673a8ec31bd5dabe18d53fd.JPG

     

    DSCI9775.thumb.JPG.816286c153989c15c4ce48eb9b1b509c.JPG

    forecastle stairways

    DSCI9776.thumb.JPG.a17cfb355b6be4aab0bbf43f7004912c.JPG

    access stairways to aft midship island ( via windless-plattform)

     

    DSCI9778.thumb.JPG.c7e9b8f85d16e64cfec6bc0c5d6a0140.JPG

    The radio antenna

     

     

  6. Update

     

    not much for today,

    the forward- and aft mast-stays as well as the aft funnel stays are mounted. The stairs from the boats deck to the bridge in dryfit, a little brass waterbucket hanging attached to the superstructure, and the lashing device for the aft lifeboat strap

     

    Nils

    DSCI9764.thumb.JPG.cb784d5a240314edb6480fe5ae4176ae.JPG

    stair to the bridge

    DSCI9765.thumb.JPG.23e7aff274c256b44414d6992baf06e1.JPG

    frontmast stay attachment

    DSCI9766.thumb.JPG.843bc4c4b76d6f9deab157041e2c73e6.JPG

    aft attachment

    DSCI9767.thumb.JPG.d9ed2ac778fed904197164fa1ee5bc3b.JPG

    Waterbucket

    DSCI9768.thumb.JPG.3aae2f6556c29b8205466390ff4ea3c3.JPG

    aft stay arrangement

    DSCI9770.thumb.JPG.c9a558259c73bfb7e987b84d65e55e59.JPG

    boats strap with lashing device

    DSCI9771.thumb.JPG.bb2844af67b9068adb5d6ba9d304e158.JPG

    front attachmentDSCI9769.thumb.JPG.4e40d99ae2686d578c02831cfbe3c721.JPG

     

    mast attachment for forward stays

     

     

×
×
  • Create New...