donrobinson Posted June 17, 2016 Author #91 Posted June 17, 2016 Hello Everyone, how's things going? Thanks to all for your comments and likes. Well not a lot to report on, certainly not as much as I wanted to have done. I have the starboard side now complete with filler blocks, the initial filling has been done and one coat of primer (gesso). I am now waiting for things to dry then a little more filling and another coat of gesso then the planking can start. I probably would have started planking now but looking at the pictures I decided another round of filling is not going to hurt and it is easy sanding compared to what I have just been through. With another 2 - 3 hours yet to finish off the hull I will have about 45 hours into this part of the build. I would like to say I enjoyed every minute of it but then I would have a nose I could use for a main mast It's Thirsty Thursday.....be happy DocBlake, Eddie, mrshanks and 16 others 19 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
Cabbie Posted June 17, 2016 #92 Posted June 17, 2016 Err, too late, Friday here now, you missed it. Elijah, mtaylor, Eddie and 1 other 4 Quote HM Cutter Mermaid 1817 HMB Endeavour 1768 by Cabbie - Artesania Latina - 1:60 - Kit Fiddle Every action has a consequence
Cabbie Posted June 17, 2016 #93 Posted June 17, 2016 OH, Yes, and great work Don, looking very good. It looks as though you are having more fun than me at the moment. Getting fired up on mine very soon i hope. Cheers Chris Elijah, Canute, Eddie and 1 other 4 Quote HM Cutter Mermaid 1817 HMB Endeavour 1768 by Cabbie - Artesania Latina - 1:60 - Kit Fiddle Every action has a consequence
DocBlake Posted June 17, 2016 #94 Posted June 17, 2016 Great job, Don! It looks like you've got things faired out well so the planking is going to look awesome. mrshanks, Eddie, Elijah and 2 others 5 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
donrobinson Posted June 17, 2016 Author #95 Posted June 17, 2016 Hey Chris; Good to hear from you. I've been missing your updates. I missed "thirsty Thursday" .....well next week I'll be there for "wet Wednesday". Thanks for dropping by mrshanks, Canute, Elijah and 3 others 6 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
donrobinson Posted June 17, 2016 Author #96 Posted June 17, 2016 Thanks Dave, I am hoping it all works out good, a little more filling and sanding then let the planking begin. By the way, your AVS is looking awesome mrshanks, Canute, Eddie and 3 others 6 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
cobra1951 Posted June 17, 2016 #97 Posted June 17, 2016 Hi Don The hull looks really good now but after a bit more filler and sanding it's going to look awesome, nice job :) Eddie, Canute, mtaylor and 1 other 4 Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
mikiek Posted June 20, 2016 #98 Posted June 20, 2016 Those dang pictures! Always showing us what we don't want to see Thanks for the update Don. Can't wait to see how things progress. Elijah, Canute, Eddie and 1 other 4 Quote Sail on...... Mike "Dropped a part? Your shoe will always find it before your eyes do" Current Builds: Completed Builds: Lancia Armata 1803 - Panart US Brig Niagara - Model Shipways ; Section Deck Between Gun Bays - Panart ; Arrow American Gunboat - Amati Riva Aquarama - Amati T24 RC Tugboat ; Hispaniola - Megow - Restoration ; Trajta - by Mikiek - Marisstella ; Enterprise 1799 - Constructo
Landlubber Mike Posted June 20, 2016 #99 Posted June 20, 2016 Looks really great Don. Get that prep work done, and you'll have a great base on which to plank on. Looking forward to seeing how this comes out, it's a cool subject! Canute, Eddie, Elijah and 1 other 4 Quote Mike Current Wooden builds: Amati/Victory Pegasus MS Charles W. Morgan Euromodel La Renommèe Plastic builds: Hs129B-2 1/48 SB2U-1 Vindicator 1/48 Five Star Yaeyama 1/700 Pit Road Asashio and Akashi 1/700 diorama Walrus 1/48 and Albatross 1/700 Special Hobby Buffalo 1/32 IJN Notoro 1/700 Akitsu Maru 1/700 Completed builds : Caldercraft Brig Badger Amati Hannah - Ship in Bottle Pit Road Hatsuzakura 1/700 Hasegawa Shimakaze 1:350 F4B-4 and P-6E 1/72 Accurate Miniatures F3F-1/F3F-2 1/48 Tamiya F4F-4 Wildcat built as FM-1 1/48 Special Hobby Buffalo 1/48 Eduard Sikorsky JRS-1 1/72 Citroen 2CV 1/24 - Airfix and Tamiya Entex Morgan 3-wheeler 1/16 Terminated build: HMS Lyme (based on Corel Unicorn) On the shelf: Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits Future potential scratch builds: HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)
donrobinson Posted June 20, 2016 Author #100 Posted June 20, 2016 Thanks to everyone for stopping in and for your comments and likes. I finished fairing the hull to my satisfaction and have started the planking. This picture is showing the little jig I used to mark the placement of the first plank, 1.5 mm above the top edge of bulkhead The first two planks on either side need to be cut down from 5 mm to 4 mm, here I am doing that using my homemade jig and Proxon table saw. The first plank being attached. I use a combination of ca glue and white glue (weldbond). I started at the stern and moved forward, I trim the plank to length and shape when I get to the bow I find I get better results doing it this way rather than off ship. Here is the first plank completed. You will notice the port side front bulkhead is a little different, the original one broke off and joined the numerous other lost parts on my floor , so I made this one out of some scraps. The height isn't a big deal as these all get taken off later, it is just needed to get the proper shape of the bow with the planks And here is how she looks as of this afternoon. The next four planks will be the full width throughout their length then after these the rest will need to be shaped. Unlike most ships the Trabaccolo's bow is bigger than the stern so it is a bit of a reversal from other builds I have done. Well that's it for now, I'll see you all in about 8 or 10 planks. It's my now favourite time of day "nap time" marktiedens, mrshanks, GuntherMT and 19 others 22 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
cobra1951 Posted June 20, 2016 #101 Posted June 20, 2016 Nice even job on the plank levels on each side Seventynet, Canute, Eddie and 1 other 4 Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
mikiek Posted July 2, 2016 #102 Posted July 2, 2016 Don - question from an ignorant beginner, how many teeth in that saw blade? Looks like a fairly low count. I was under the impression that cutting thin strips required a high tooth count. From that, I have been using a 230 count blade. It cuts OK but the teeth really get gunked up. Eddie, Elijah, Canute and 2 others 5 Quote Sail on...... Mike "Dropped a part? Your shoe will always find it before your eyes do" Current Builds: Completed Builds: Lancia Armata 1803 - Panart US Brig Niagara - Model Shipways ; Section Deck Between Gun Bays - Panart ; Arrow American Gunboat - Amati Riva Aquarama - Amati T24 RC Tugboat ; Hispaniola - Megow - Restoration ; Trajta - by Mikiek - Marisstella ; Enterprise 1799 - Constructo
GuntherMT Posted July 2, 2016 #103 Posted July 2, 2016 Can't tell you what blade Don uses, but this is an excellent read on what blades to use for what size of wood you are cutting from Jeff at Hobbymill who used to be the go-to source for milled wood for the US builders - http://www.hobbymillusa.com/byrnes-saw-operation.php WackoWolf, Elijah, mrshanks and 4 others 7 Quote Brian Mystery project coming soon! Current build - Medway Longboat Complete - Armed Virginia Sloop Complete - Carmen (First Build)
Seventynet Posted July 2, 2016 #104 Posted July 2, 2016 (edited) Looking really good Don. From what you're hinting or what I think I'm seeing you will have an interesting planking configuration into the bow. I look forward to seeing what it looks like. Best, Ian Edited July 2, 2016 by Seventynet cobra1951, mtaylor, Elijah and 1 other 4 Quote Builds in progress - Speedwell - by Syren Ship Model Company Builds completed - Hayling Hoy - by David Antscherl - Naval Cutter Cheerful - by Syren Ship Model Company - Cape Cod Catboat - by Bluejacket - Gokstad - by Dusek - Ship's Boat - by Dusek - Brazzera - by MarisStella
donrobinson Posted July 2, 2016 Author #105 Posted July 2, 2016 Hi Lawrence, Thanks for your comments. Yes that jig is a lot of help cutting strips, certainly makes things more accurate. I have use it a few times now and am very happy with it. mtaylor, Eddie, cobra1951 and 4 others 7 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
donrobinson Posted July 2, 2016 Author #106 Posted July 2, 2016 Hey Mike, the blade is a 80 tooth, unfortunately it is the finest blade Proxxon offers. It cuts thin strips fairly good as long as you have the proper hold downs in place. The blades that Jim Byrnes sells have a 1/2" hole whereas the Proxxon has a 10 mm hole. I have the ones from Jim but still have to make a bushing for them in order to use them. To clean the "gunk" in your blades use some spray on oven cleaner, I have been using that for years now and it works really good. WackoWolf, mtaylor, cobra1951 and 5 others 8 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
donrobinson Posted July 2, 2016 Author #107 Posted July 2, 2016 Thanks for stopping in Ian, nice work on your Catboat. The bow is fairly blunt so I have already added a joggle plank, which is partly my fault for not paying attention as to what I was doing but it is all turning out pretty good. Right now I have 8 strakes on the starboard and eleven on the port side done. I should have enough done for a small update soon. Good to hear you are back on the Vicky again Elijah, Eddie, cobra1951 and 3 others 6 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
DocBlake Posted July 2, 2016 #108 Posted July 2, 2016 Nice work on the planking, Don! I use the same technique (weld bond and CA glues)) for my planking. The CA is a "liquid clamp" which holds while the Weldbond cures. mrshanks, zoly99sask, Elijah and 5 others 8 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
donrobinson Posted July 2, 2016 Author #109 Posted July 2, 2016 Thanks Dave. I swear by this method and have never had any issues with doing it this way. Seventynet, cobra1951, mrshanks and 5 others 8 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
mtaylor Posted July 3, 2016 #110 Posted July 3, 2016 Don, In addition the link to Hobbymill on blades... here's a recent topic here relating to the Proxxon saw and blades. Hope it helps also. http://modelshipworld.com/index.php/topic/13565-blade-for-table-saw-proxxon-fet-for-planks/?hl=%2Bproxxon+%2Bsaw Canute, Eddie, Elijah and 1 other 4 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
WackoWolf Posted July 3, 2016 #111 Posted July 3, 2016 Mark I was just reading that link, and your right that is an excellent link to read for saw blades, a lot of good information there. Canute, mtaylor, Eddie and 2 others 5 Quote Wacko Joe Go MSW :)
donrobinson Posted July 3, 2016 Author #112 Posted July 3, 2016 Mark, Thanks for that link. I just ordered the adaptor from Micro mark, hopefully that works with the blades I have Elijah, Canute, Eddie and 2 others 5 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
skipper1947 Posted July 3, 2016 #113 Posted July 3, 2016 Nice work on the planking, Don! I use the same technique (weld bond and CA glues)) for my planking. The CA is a "liquid clamp" which holds while the Weldbond cures. Thanks Dave. I swear by this method and have never had any issues with doing it this way. Do you use thin CA Don and Doc (Dave?) I am afraid I am too clumsy and often have CA glue ooze into the opening, making a nice dark spot on the wood. I have had better luck though, with thick CA. I guess I haven't commented for a while on your model Don, but it really is coming along nicely! Skip Canute, mtaylor, Eddie and 2 others 5 Quote
mikiek Posted July 3, 2016 #114 Posted July 3, 2016 Skip - these applicators have been a great help in applying CA. The thin stuff is a little hard to work with but medium works well. The CA stays usable for a week or so in the apllicator. Also, my apologies Don for the reply about saw blades. I did not intend to get things off track. However I will say I learned something from them. Elijah, Eddie, skipper1947 and 6 others 9 Quote Sail on...... Mike "Dropped a part? Your shoe will always find it before your eyes do" Current Builds: Completed Builds: Lancia Armata 1803 - Panart US Brig Niagara - Model Shipways ; Section Deck Between Gun Bays - Panart ; Arrow American Gunboat - Amati Riva Aquarama - Amati T24 RC Tugboat ; Hispaniola - Megow - Restoration ; Trajta - by Mikiek - Marisstella ; Enterprise 1799 - Constructo
donrobinson Posted July 3, 2016 Author #115 Posted July 3, 2016 (edited) No problems Mike it ended up helping me out, but cost me $80.00(I found more ``must have`` items). Skip I use mainly the medium and the little tubes( you can see in the pictures above) that attach to the bottle. They just slip on and last for a fairly long time, I just leave these on all the time and never put a cap on the bottle. The thin ca I only use to repair cracks or breaks the thick is used when I need a little more time before it sets. Edited July 3, 2016 by donrobinson Eddie, mtaylor, Elijah and 3 others 6 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
mikiek Posted July 3, 2016 #116 Posted July 3, 2016 but cost me $80.00(I found more ``must have`` items). That never happens, does it? You gotta love this hobby..... mrshanks, mtaylor, Eddie and 3 others 6 Quote Sail on...... Mike "Dropped a part? Your shoe will always find it before your eyes do" Current Builds: Completed Builds: Lancia Armata 1803 - Panart US Brig Niagara - Model Shipways ; Section Deck Between Gun Bays - Panart ; Arrow American Gunboat - Amati Riva Aquarama - Amati T24 RC Tugboat ; Hispaniola - Megow - Restoration ; Trajta - by Mikiek - Marisstella ; Enterprise 1799 - Constructo
Landlubber Mike Posted July 3, 2016 #117 Posted July 3, 2016 Looks really great Don. That lady has a lot of curves! Love the unique subjects that MarisStella is offering. Canute, cobra1951, mtaylor and 3 others 6 Quote Mike Current Wooden builds: Amati/Victory Pegasus MS Charles W. Morgan Euromodel La Renommèe Plastic builds: Hs129B-2 1/48 SB2U-1 Vindicator 1/48 Five Star Yaeyama 1/700 Pit Road Asashio and Akashi 1/700 diorama Walrus 1/48 and Albatross 1/700 Special Hobby Buffalo 1/32 IJN Notoro 1/700 Akitsu Maru 1/700 Completed builds : Caldercraft Brig Badger Amati Hannah - Ship in Bottle Pit Road Hatsuzakura 1/700 Hasegawa Shimakaze 1:350 F4B-4 and P-6E 1/72 Accurate Miniatures F3F-1/F3F-2 1/48 Tamiya F4F-4 Wildcat built as FM-1 1/48 Special Hobby Buffalo 1/48 Eduard Sikorsky JRS-1 1/72 Citroen 2CV 1/24 - Airfix and Tamiya Entex Morgan 3-wheeler 1/16 Terminated build: HMS Lyme (based on Corel Unicorn) On the shelf: Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits Future potential scratch builds: HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)
DocBlake Posted July 4, 2016 #118 Posted July 4, 2016 Skip: I use Zap-A-Gap in the green bottle. mtaylor, Eddie, Elijah and 3 others 6 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
donrobinson Posted July 4, 2016 Author #119 Posted July 4, 2016 This is a very small update just to let you all know I am still working on her. The planking is still going on. I have, as usual, created problems for myself that I am paying for with each strake. The problem being that I am too smart to line off or measure, something like that road map in the glove box we never used (remember them?). Anyways after realising my error I am now paying for it and have since started to measure and line off. I am confidant that things will be alright only thing is leaving it natural is probably not going to happen. In the pictures she only has the first sanding and scraping done and she has some minor gaps to deal with. Nest up is a couple garboard strakes. Have a Good One marktiedens, Canute, Seventynet and 22 others 25 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
mikiek Posted July 4, 2016 #120 Posted July 4, 2016 That is some beautiful wood Don. It would be a shame if you weren't able to show it. Some very interesting hull lines as well. Where do you see things going south? Eddie, Seventynet, Canute and 4 others 7 Quote Sail on...... Mike "Dropped a part? Your shoe will always find it before your eyes do" Current Builds: Completed Builds: Lancia Armata 1803 - Panart US Brig Niagara - Model Shipways ; Section Deck Between Gun Bays - Panart ; Arrow American Gunboat - Amati Riva Aquarama - Amati T24 RC Tugboat ; Hispaniola - Megow - Restoration ; Trajta - by Mikiek - Marisstella ; Enterprise 1799 - Constructo
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.