Jump to content

Baby Bootlegger by Gerhardvienna - 1/10 - RADIO


Recommended Posts

Hi everyone

 

As my admiral commanded me, I will have to build beneath my historic old ships another. more modern boat, a BabyBootlegger will be made then. The plans came from John Toms free for download, lots of infos are to find in the internet. I found one really good building report at rc.groups http://www.rcgroups.com/forums/showthread.php?t=1805606think I will try to stay close to this one. But not all that nails the builder used for his model, they were not there at the original boat, as photos from it show. I still have no clue what engine to use, maybe I make it electric at first, with an opinion for fuel drive later :o .

Here the plans again, 4 mm plywood is at home for the frames and keel works. under planking will be made with 3 mm Balsa wood, visible planking with 1 - 1,5 mm mahogany wood.

 

post-24068-0-29074800-1465490169_thumb.jpg

post-24068-0-27131200-1465490197_thumb.jpg

 

And one photo from the original, source was

http://cdn.silodrome.com/wp-content/uploads/2011/06/Baby-Bootlegger-302.jpg

post-24068-0-89225100-1465490744_thumb.jpg

 

The model will be about 90 cm long and about 18cm wide.

 

Regards

Gerhard

 

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Link to comment
Share on other sites

The nails you refer to are actually rivets and Baby Bootlegger is studded with them. A close up view of her will show you that she has thousands of little bronze rivets holding her planking on. It's quite beautiful. She's my favourite motor boat. A beautiful gold studded mahogany cigar of a boat. And fast. Her engine is a work of art as well.

Link to comment
Share on other sites

Hi Sailor

 

If the rivets were, they will be on the model, thats a fact! If someone here has a close shot from them would be nice to show, even the pattern this rivets were set would be interesting then.

The Baby was a really fast craft, no wonder with this giant Hispano-Suiza engine. More than 11 litres must have power....

 

post-24068-0-21305400-1465533219.jpg

 

Somewhere in the internet I found original drawings and the full handbook to the engine, so I might be able to rebuild it in measure, when my new milling machine is on the workbench!

 

Regards

Gerhard

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Link to comment
Share on other sites

That Hispano Suiza was good for about 300 horsepower if I recall correctly. Her hull is indeed covered in rivets. I have a few images of her but can't seem to post them. You have to look closely but if you do, you can see that they are in fact there. I seem to recall seeing an image that shows the rivets well but I don't have it on this computer. Google images might help there.

Link to comment
Share on other sites

For the rivets I found only this photograph from the original boat

from http://cdn.silodrome.com/wp-content/uploads/2011/06/Baby-Bootlegger-30-Bragg.jpg, the rows of rivets appear as dark points in the shadow

post-24068-0-59973000-1465564266.jpg

 

And one more from a model, made in Germany. Here are the rivets good to see, and the pattern seems to be close to the pattern from the photograph above. Pic comes from http://www.miniwerft.de/die-miniwerft/modelle-im-bau/

post-24068-0-56665500-1465564429.png

 

Regards

Gerhard

 

 

 

 

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Link to comment
Share on other sites

awesome looking boat Gerhard!   those are some good looking plans too :)   I'll enjoy watching you build this one.

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

awesome looking boat Gerhard!   those are some good looking plans too :)   I'll enjoy watching you build this one.

 

Hi Popeye even here!

 

Take your seat, coffe is in the can, some Sacher Torte on the sideboard too.

The plans are from John Toms http://www.john-tom.com/RCPowerBoats/ClassicModelBoatPlans.html, free for download. There are a lot more good plans to find!

 

Regards

Gerhard

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Link to comment
Share on other sites

Hi Gerhard,  This is quite a switch from your Cairo.  But it is definitely a beautiful boat.  I forgot about John Toms they have a lot of fine plans of steam engines too.

 

Bob

Every build is a learning experience.

 

Current build:  SS_ Mariefred

 

Completed builds:  US Coast Guard Pequot   Friendship-sloop,  Schooner Lettie-G.-Howard,   Spray,   Grand-Banks-dory

                                                a gaff rigged yawl,  HOGA (YT-146),  Int'l Dragon Class II,   Two Edwardian Launches 

 

In the Gallery:   Catboat,   International-Dragon-Class,   Spray

Link to comment
Share on other sites

Hi Bob

 

Not a really switch, the Cairo stays as my main project. The Baby is "ordered" from my admiral, she likes such fast and sporty boats. And, IF I build something sporty, it must be an eyecatcher! I found John Toms by searching for Steam engines, and found that plans beneath lots of others by coincidence.

 

Regards

Gerhard

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Link to comment
Share on other sites

Mmmm ... smelt of coffee attracts me here to watch and learn

Edited by Nenad

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Nice boat to build and very high standard when you want to build like the boats on the photo's. In Dortmund I saw this model of a bootlegger. Also lots of other boats like that. I like the mirror finish.

 

P1030404_zps8czqft9e.jpg

Link to comment
Share on other sites

Ah, the offer of Sacher Torte and coffee! Okay, I'm in then! :D

 

Looks like this will be an interesting build Gerhard, and the finished boat will be a real beauty. Your Admiral has good taste and I'm sure will be delighted to see you starting this.

Link to comment
Share on other sites

Oh Boy, did someone say Sacher Torte and coffee...I'm staying and I brought a chair.

Mark
Phoenix, AZ


Current builds;


Previous builds, in rough order of execution;
Shipjack, Peterbrough Canoe, Flying Fish, Half Moon, Britannia racing sloop, Whale boat, Bluenose, Picket boat, Viking longboat, Atlantic, Fair American, Mary Taylor, half hull Enterprise, Hacchoro, HMS Fly, Khufu Solar Boat.

On the shelf; Royal Barge, Jefferson Davis.

Link to comment
Share on other sites

Mmmm ... smelt of coffee attracts me here to watch and learn

 

 

Hi Nenad

 

This will be a learning thing for me too! I`ve never made such a shining finish, all boats I ever made were grey fleet or historic, no glossy paint on them!

 

 

Nice boat to build and very high standard when you want to build like the boats on the photo's. In Dortmund I saw this model of a bootlegger. Also lots of other boats like that. I like the mirror finish.

 

P1030404_zps8czqft9e.jpg

 

Hello Kees

 

Beautiful made botlegger there, I just hope I can get close to this! We`ll see...................

Thanks for showing!

 

 

Ah, the offer of Sacher Torte and coffee! Okay, I'm in then! :D

 

Looks like this will be an interesting build Gerhard, and the finished boat will be a real beauty. Your Admiral has good taste and I'm sure will be delighted to see you starting this.

 

Good Morning Grant

My admiral has indeed a good taste, she choose ME :rolleyes: 

JUST KIDDING....

To be serious, This will be a new experience for me, there are a lot of things new to me! But I want to make this one as good as ever possible, not to disappoint her.

 

 

Oh Boy, did someone say Sacher Torte and coffee...I'm staying and I brought a chair.

 

Hi Mark

Stay in and bring your friends, the more there are, the better will the mood be for all of us :D

 

Regards, thank you all for watching and youe kind likes!

Gerhard

 

 

 

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Link to comment
Share on other sites

Back again, and almost done with my kitchen renovation. Just a few days more and that is completed!

 

By taking a good look at the plans I discovered two things to change. The propellershaft is too long, it will be in the final version just about 75 mm instaed of 98 mm lopng. And the form of the rudder is not good the way it is drawn at the plans. The turning point would be much too far in front of the propeller, and the form of the blade is unnessesary large.

I marked the things to change on the photo!

 

post-24068-0-70365600-1465665362_thumb.jpg

 

Regards, Thank you all for watching & following& your kind likes.........

Gerhard

Edited by Gerhardvienna

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Link to comment
Share on other sites

Thank you all again for your kindness!

 

Back with overworked plans, the prop and rudder seem to be correct now, as I have redrawn this section

post-24068-0-54498500-1465738451_thumb.jpg

Fell free to use or download the pics for further projects.........

 

Regards

Gerhard

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Link to comment
Share on other sites

She looks fast! And shiny :D!

-Elijah

 

Current build(s):

Continental Gunboat Philadelphia by Model Shipways

https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/

 

Completed build(s):

Model Shipways Phantom

http://modelshipworld.com/index.php?showtopic=12376

 

Member of:

The Nautical Research Guild

N.R.M.S.S. (Nautical Research and Model Ship Society)

Link to comment
Share on other sites

Hi Elijah

 

She does! I just hope i can make her shine so good!

 

Hello everyone! Thank you all for your interest& many likes!

 

Today I found some time for the first step if the rudder making. It consists of a piece of brass tube 6 x 4 mm, a brass bar of 4 mm dia., and some 1 mm brass wire at the moment, even more brass will follow. The bar is soldred into the tube, 1 mm Brass wire was soldered to the tube from outside, and then all was covered with 3mm balsa wood. The rudder then was grinded to shape, and will be coated with 0,1 mm brass sheet.

 

post-24068-0-70968100-1465841830_thumb.jpg

post-24068-0-62734400-1465841855_thumb.jpg

post-24068-0-59485900-1465841882_thumb.jpg

post-24068-0-38628400-1465841910_thumb.jpg

 

Regards

Gerhard

 

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Link to comment
Share on other sites

As I`ve startet yesterday with the rudder, I made some progress today. The blade is brass plated now, tomorrow I will prepare it with some filler and then paint it black. Although the original rudder seems to be raw metal, I prefer to have some paint on it.

 

post-24068-0-89580400-1465921163_thumb.jpg

 

post-24068-0-50506100-1465921199_thumb.jpg

 

Thank you all again for your interest, maybe critics or comments, and all your nice likes!

 

Regards

Gerhard

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Link to comment
Share on other sites

Nice looking rudder.

 

Bob

Every build is a learning experience.

 

Current build:  SS_ Mariefred

 

Completed builds:  US Coast Guard Pequot   Friendship-sloop,  Schooner Lettie-G.-Howard,   Spray,   Grand-Banks-dory

                                                a gaff rigged yawl,  HOGA (YT-146),  Int'l Dragon Class II,   Two Edwardian Launches 

 

In the Gallery:   Catboat,   International-Dragon-Class,   Spray

Link to comment
Share on other sites

Thank you Bob!

 

It´s not quite like I wanted it, maybe there will be another try. First I want to filler and paint the blade, then habe a good look at it, and then decide if it is good enough or not! We`ll see tomorrow................

 

Btw, Whoever has a good photo from the Rudder/Propeller section from the original boat PLEASE show it here! I found only one in the internet, and there is almost nothing to see. I`m still free to change everything on the rudder to get as close as possible to the real boat.

post-24068-0-20079400-1465927439.jpg

 

Regards

Gerhard

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Link to comment
Share on other sites

Link to comment
Share on other sites

Hi Carl

 

Thank you! The photo from the Babyface shows it best, by searching a bit more I found the site from Silodrome, they have good plans to the Bootöegger. After I have seen this I will have to build the full framework first, and the rudder/ prop assembling then. The "old" rudder is cancelled!

 

Regards

Gerhard

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Link to comment
Share on other sites

Hi again

 

After Carl`s good hints I found some time to redraw the rudder/ Propeller section, will be a hard thing to make, but not impossible. And I glued the first parts from the plan to 4 mm plywood, but had not enough glue stick to glue them all. This will be made tomorrow, and then all will be cut from the wood.

 

The actual rudder and prop section, the measures given from the plans are correct now.

post-24068-0-61135300-1466011336.jpg

 

First parts on plywood

post-24068-0-26837100-1466011159_thumb.jpg

 

Thank you all again for watching, comments are always welcome (as critics are)!

 

Regards

Gerhard

 

Edited by Gerhardvienna

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Link to comment
Share on other sites

Glad to have been of service, Gerhard. Sometimes a link is all it takes to help someone out ... Looks good ... maybe I will have a go at that build in the near future too. A bit like the Arno XI from Ferrari I've got stashed for later ...

Carl

"Desperate affairs require desperate measures." Lord Nelson
Search and you might find a log ...

 

Link to comment
Share on other sites

Glad to have been of service, Gerhard. Sometimes a link is all it takes to help someone out ... Looks good ... maybe I will have a go at that build in the near future too. A bit like the Arno XI from Ferrari I've got stashed for later ...

 

 

Hi Carl

 

thanks again, your links was great support! The Arno is on my list for later, but I found no plans for her, just the 1958 Ted Jones classic roundnose plans.

I would be glad to have a "competitor" for the Baby :cheers: , feel free to use the drawings for your own build, as anyone may do!

 

Regards

Gerhard

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Link to comment
Share on other sites

Back again, but not much to report at the time ;)

The paper sheets are all glued to plywood, and now I`m trying to construct the rudder with 3D-CAD, just to figure the easiest way out how to make it. Pics will follow, when all is done perfect on the PC, maybe with measured drawings for "open Use" to everyone!

 

Regards and thank you all for your interest & so many likes.......

Gehard

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Link to comment
Share on other sites

Hello again!

 

The drawings took much longer than I expected, but now are the first results here. The upper end of the rudder axle can be finished when i build the boat, I have no clue at the time how to steer. One possible way can be a steering bar below the waterline, the other a timing gear belt on the upper end.

But here come the first drawings. The keel plate must be cut different to the plans follow the thick red lines.

 

Full view of new rudder, the yellow part will be shown in deep blue in the details drawings

post-24068-0-07025800-1466437146_thumb.jpg

 

Changes to be made at the stern

post-24068-0-08262100-1466437222_thumb.jpg

 

Rudder assembly

post-24068-0-35806700-1466437262_thumb.jpg

 

Rudder blade

post-24068-0-49269900-1466437307_thumb.jpg

 

Axles and bushings

post-24068-0-52158500-1466437366_thumb.jpg

 

Thank you once more for your interest, reactions, critics, advises welcome, thank you all for the many likes again!

Regards

Gerhard

 

 

 

 

 

Problems just mean: solutions not yet found

 

Models in progress

SMS DANZIG

http://modelshipworld.com/index.php/topic/12842-sms-danzig-1851-by-gerhardvienna-radio-150-scale/

USS CAIRO

http://modelshipworld.com/index.php/topic/13282-uss-cairo-by-gerhardvienna-live-steam-radio/

Baby Bootlegger 1/10

http://modelshipworld.com/index.php/topic/13625-baby-bootlegger-110-radio-by-gerhardvienna/

 

Swiss paddlesteamer RIGI 1848 1:50, after plans from the Verkehrshaus Zürich, rescaled to original length

Anchor tugboat BISON, 1:50, plans from VTH, scratch

Finished models

See-Ewer ELBE, Constructo kit 1:48

German fastboat after plans from german Reichskriegsmarine measure unknown (too ugly to show up!)

German traffic boat for battleships WW2, 1:50, after plans from Jürgen Eichardt, scratch

German Schnellboot TIGER P6141 VTH plans, scratch

 

Link to comment
Share on other sites

Gerhard,

 

I think your rudder will work.  Possibly use horns on the rudder post and wire/line to the servo?  As an aside, I'm not sure why you redesigned it.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...