mikiek Posted January 29, 2019 #181 Posted January 29, 2019 On 1/21/2019 at 9:25 PM, Elijah said: Then I tackled the main mast. I've never had to carve a mast before, so it was interesting. I think I was a lot better at it by the end than at the beginning, and I suppose that's how it's supposed to work... Very true. But the other half of the statement goes something like "and my next build will be just far enough off that I forgot it all" 😕 Elijah - your attention to detail has grown by leaps & bounds as has your execution of putting together the small parts. It's a pleasure watching you work.... EJ_L, Elijah and Canute 3 Quote Sail on...... Mike "Dropped a part? Your shoe will always find it before your eyes do" Current Builds: Completed Builds: Lancia Armata 1803 - Panart US Brig Niagara - Model Shipways ; Section Deck Between Gun Bays - Panart ; Arrow American Gunboat - Amati Riva Aquarama - Amati T24 RC Tugboat ; Hispaniola - Megow - Restoration ; Trajta - by Mikiek - Marisstella ; Enterprise 1799 - Constructo
Elijah Posted February 1, 2019 Author #182 Posted February 1, 2019 Thank you very much Mike, that's exactly how I felt when I had to start planking. And I hope that's not how it will be when I start rigging, but I'm not entirely sure... EJ_L and Canute 2 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
Elijah Posted October 11, 2019 Author #183 Posted October 11, 2019 I have turned the spars using an electric drill and sandpaper, and I think they have turned out decently. I actually broke one, and had to fix it. Can you spot the repair? I've also begun rigging the cannons, which I'm doing off of the model before fixing them on. Until next time, EricWilliamMarshall, Landlubber Mike, DocBlake and 18 others 21 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
JesseLee Posted October 12, 2019 #184 Posted October 12, 2019 Good fix. All I can see is a very thin line on the middle one. Looks like a light pencil mark. EJ_L, Elijah and Canute 3 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
Elijah Posted October 13, 2019 Author #185 Posted October 13, 2019 Thanks Jesse! Canute, JesseLee and EJ_L 3 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
DocBlake Posted October 13, 2019 #186 Posted October 13, 2019 Really, really nice work, Elijah! EJ_L, Elijah and Canute 3 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
vaddoc Posted October 13, 2019 #187 Posted October 13, 2019 I have not been able to follow your work on this boat Elijah and I very much regret it. Your skills have developed so much, you are doing a fantastic job! The planking came out superb. Regards Vaddoc EJ_L, Elijah and Canute 3 Quote Current projects: Hercules Steam Tugboat - scratch build from half model lines Completed projects: 21' Fisherman's Launch - plans by Howard Chapelle 21' Yawl Longboat - plans from the National Maritime Museum Deben 5 tonner - a Whisstock yard design 24' exploration gaff rigged ketch - a Tad Roberts design 15' knockabout sailing boat
Elijah Posted October 14, 2019 Author #188 Posted October 14, 2019 Thank you very much Doc and Vaddoc! EJ_L and Canute 2 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
EJ_L Posted October 14, 2019 #189 Posted October 14, 2019 The skill of a great model maker is not just how well he creates but, how well he hides his mistakes. You are a great modeler indeed! Well done on the repair. EricWilliamMarshall, Elijah and Canute 3 Quote "A Smooth Sea NEVER made a Skilled Sailor" - John George Hermanson -E.J. Current Builds - Royal Louis - Mamoli Royal Caroline - Panart Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery La Couronne - Corel - Build Log & Gallery Rattlesnake - Model Shipways, HMS Bounty - Constructo Plastic - USS Constitution - Revel (twice), Cutty Sark. Unfinished - Plastic - HMS Victory - Heller, Sea Witch. Member : Nautical Research Guild
Landlubber Mike Posted October 14, 2019 #190 Posted October 14, 2019 Nice work Elijah! Beautiful work indeed. If you don’t mind me asking, what line are you using? It looks very nice even in the macro photos. Elijah, EJ_L and Canute 3 Quote Mike Current Wooden builds: Amati/Victory Pegasus MS Charles W. Morgan Euromodel La Renommèe Plastic builds: Hs129B-2 1/48 SB2U-1 Vindicator 1/48 Five Star Yaeyama 1/700 Pit Road Asashio and Akashi 1/700 diorama Walrus 1/48 and Albatross 1/700 Special Hobby Buffalo 1/32 IJN Notoro 1/700 Akitsu Maru 1/700 Completed builds : Caldercraft Brig Badger Amati Hannah - Ship in Bottle Pit Road Hatsuzakura 1/700 Hasegawa Shimakaze 1:350 F4B-4 and P-6E 1/72 Accurate Miniatures F3F-1/F3F-2 1/48 Tamiya F4F-4 Wildcat built as FM-1 1/48 Special Hobby Buffalo 1/48 Eduard Sikorsky JRS-1 1/72 Citroen 2CV 1/24 - Airfix and Tamiya Entex Morgan 3-wheeler 1/16 Terminated build: HMS Lyme (based on Corel Unicorn) On the shelf: Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits Future potential scratch builds: HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)
Elijah Posted October 15, 2019 Author #191 Posted October 15, 2019 Thank you EJ and Mike! I'm sure there will be even more mistakes to hide along the way... I'm using Syren rigging line, which is the best kind I know of, thanks Chuck. EJ_L, Ryland Craze, JesseLee and 1 other 4 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
DocBlake Posted April 13, 2020 #192 Posted April 13, 2020 Waiting to see more, Elijah! Elijah, Ryland Craze, Canute and 1 other 4 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
BobCardone Posted April 13, 2020 #193 Posted April 13, 2020 Elijah, your build log was one of the main inspirations for my Philly build. I'm hoping to see some more also.... Canute, EJ_L and Elijah 3 Quote Bob Cardone On the bench: Gunboat Philadelphia Model Shipways 1:24 CSS Palmetto State Verlinden 1:200 Next up: USN Picket Boat #1 Model Shipways 1:24 Completed: F-4 Phantom Hasegawa 1:48 Smilodon Fatalis Unknown manufacturer and scale Panzer IV 1:32 Unimax/ Forces of Valor prebuilt with mods, diorama Member of the Nautical Research Guild
Elijah Posted May 6, 2020 Author #194 Posted May 6, 2020 (edited) Hello all! Thank you Bob and Dave for the kind words. This has obviously been a very strange year. Earlier, I was hard pressed to find much time for building, but with the current lockdown I have gotten the shipyard running yet again. Most recently I have just finished cleaning up the cap rails. From here, I'm not entirely sure what I will do next. I think it may finally be time to confront what I have been avoiding for a long time......... staining day . Wish me luck. I've got an airbrush to apply it with, so we'll see how it goes. In any case, I'm glad to be back and I look forward to building the rest of this ship alongside your much appreciated guidance! Here are a couple photos of the cap rail dry fit. It's going to be a challenge to glue it on while keeping the run looking right. Also, I've noticed that some of the holes for components above the cap rail overlap with some of the bulkheads. I hope that doesn't become a problem.... Edited May 6, 2020 by Elijah Moab, Canute, jwvolz and 13 others 16 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
Elijah Posted May 8, 2020 Author #195 Posted May 8, 2020 Well, it looks like today was staining day! It was kind of on a whim, but I think it went pretty well. The only other structural wood components that will have to be stained after this are the sweeps and supports for the awning structure. I'm not sure I have quite enough stain to do that, but we'll cross that bridge when we come to it. Until then, I've got plenty to do. Here are the many different wooden parts that were stained today. EricWilliamMarshall, jwvolz, Canute and 12 others 15 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
kurtvd19 Posted May 8, 2020 #196 Posted May 8, 2020 Elijah: I will check if I have more stain mixed - if not I wrote the mix proportions down so can do up some more. Kurt Elijah, EJ_L and Canute 3 Quote Kurt Van Dahm Director NAUTICAL RESEARCH GUILD www.thenrg.org SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS CLUBS Nautical Research & Model Ship Society of Chicago Midwest Model Shipwrights North Shore Deadeyes The Society of Model Shipwrights Butch O'Hare - IPMS
Elijah Posted May 8, 2020 Author #197 Posted May 8, 2020 Thank you very much Kurt, that's very kind of you and I will order the raw materials if you no longer have any on hand. Canute and EJ_L 2 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
kurtvd19 Posted May 8, 2020 #198 Posted May 8, 2020 I know I have the stains to mix up more. I will check ASAP if I have any mixed and let you know. Canute, Elijah, Landlubber Mike and 1 other 4 Quote Kurt Van Dahm Director NAUTICAL RESEARCH GUILD www.thenrg.org SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS CLUBS Nautical Research & Model Ship Society of Chicago Midwest Model Shipwrights North Shore Deadeyes The Society of Model Shipwrights Butch O'Hare - IPMS
Elijah Posted May 8, 2020 Author #199 Posted May 8, 2020 Sounds good, thank you. EJ_L and Canute 2 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
6ohiocav Posted May 8, 2020 #200 Posted May 8, 2020 Elijah, Glad to see you are back at it. Your gunboat is exquisite. The staining looks spot on. I get nervous when I apply any finishes since a lot of hard work can be ruined in short order. You have met the challenge. I will follow along if you don't mind. EJ_L and Elijah 2 Quote Darrell Completed build - US Brig. Niagara http://modelshipworld.com/index.php/topic/13562-us-brig-niagara-by-6ohiocav-model-shipways-scale-164/
Elijah Posted May 8, 2020 Author #201 Posted May 8, 2020 Thank you Darrell, I'm glad to have you along! EJ_L 1 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
Elijah Posted July 7, 2020 Author #202 Posted July 7, 2020 Catastrophe!!! I had the clever idea to install the cap rail on the reverse sides, that way the laser cut holes would be cleaner, and the joints would be less prominent. In doing so, I forgot that the cap rail pieces are actually, in fact, not symetrical!! So far, this is the greatest blunder of my modeling career. Luckily, I do have some isopropyl alcohol, so as long as I'm careful, I hope I can remove the necessary piece and clean it up to my satisfaction. Wish me luck, this may prove difficult. EJ_L, Tigersteve, Ryland Craze and 7 others 9 1 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
Tigersteve Posted July 7, 2020 #203 Posted July 7, 2020 I feel your pain. Take your time with it. I’m sure your repair will work out great! Steve Canute, Elijah, JpR62 and 2 others 5 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
DocBlake Posted July 7, 2020 #204 Posted July 7, 2020 We've all had that sinking feeling in the pit of the stomach at one time or another! I'm sure your fix will turn out fine, Elijah! EJ_L, Elijah and Canute 3 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
Elijah Posted July 7, 2020 Author #205 Posted July 7, 2020 Thanks for the encouragement EJ_L and Canute 2 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
bear Posted July 7, 2020 #206 Posted July 7, 2020 Ahoy I recommend this kit for anyone who wants to learn how to build a wooden ship model. And be able to complete your first build! There are two books on it,which I used to add details along with photos of the real one at the Smithsonian . Here's mine that I built back in 2014. I placed 1st in our IPMS Spring Show for Non Powered Sailing Ships. I had planed to enter it in the Seattle Spring Show this April , but that Show was canceled due to Covid19. Maybe next year. JesseLee, Elijah, GrandpaPhil and 5 others 8 Quote
GrandpaPhil Posted July 8, 2020 #207 Posted July 8, 2020 Your model is looking good, don’t get discouraged. The great thing about a wood kit is that pieces are easily replaced, if need be, especially if you can take a pattern off the original. EJ_L and Elijah 2 Quote Building: 1:200 Russian Battleship Oryol (Orel card kit) 1:64 HMS Revenge (Victory Models plans) 1:64 Cat Esther (17th Century Dutch Merchant Ships)
Elijah Posted July 8, 2020 Author #208 Posted July 8, 2020 Yes, it's also very handy that Model Shipways replaces parts for free. Canute, GrandpaPhil, Duanelaker and 2 others 5 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
John Allen Posted July 8, 2020 #209 Posted July 8, 2020 Well done. Elijah and Canute 2 Quote John Allen Current builds HMS Victory-Mamoli On deck USS Tecumseh, CSS Hunley scratch build, Double hull Polynesian canoe (Holakea) scratch build Finished Waka Taua Maori War Canoe, Armed Launch-Panart, Diligence English Revenue Cutter-Marine Model Co.
Elijah Posted July 8, 2020 Author #210 Posted July 8, 2020 I have successfully removed the cap rail piece, and now it’s just cleanup. Then I will have to make the tone match that of the other cap rail pieces, as the underside is slightly off. These two longest pieces are the only asymmetrical ones, so I can follow my original plan with the rest. I’m glad I caught this when I did though, this could have been a lot harder... VTHokiEE, BenD, Canute and 8 others 11 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.