Jump to content

HM Cutter Cheerful 1806 by Blue Ensign - FINISHED - Syren Ship Model Company - 1:48 scale


Recommended Posts

Nice work, BE, and good save on that gap.  Surely, if there is a warp, it won't be enough to lead to other problems. (?)

 

Looking over your tool setup again, I noticed you had a vacuum hose hooked up.  (And I've often wondered how you took care of the dust in a carpeted work room.)  Does that lead to a shop-vac, or do you have a fully-blown dust-collection system (one of the many, many upgrades I've been craving)?

 

Cheers,

 

Martin

Current Build:  HMS FLY 1776

 

Previous Builds:  Rattlesnake 1781

                        Prince de Neufchatel

Link to comment
Share on other sites

Hi Martin,  I only usually bother with the vac if I'm making serious dust; all the Proxxon machines take my Henry vacuum cleaner connection, but I have been toying with the idea of getting the Proxxon version which comes on automatically with the machine.

 

Nor sure Mrs W of the Shires would appreciate industrial grade extraction equipment running around my office cum workshop. :rolleyes: although she likes the idea of the Proxxon cleaner, has visions of using it around the rest of the upper floor, when I'm out of the way I think.

 

B.E.

Link to comment
Share on other sites

  • 2 weeks later...

Happy new year to you BE!  I haven't been on much lately, but missed your Cheerful project.  Great start already, and even better, you have extra toys to play with :)  Hope you don't mind if I follow along, it's always a treat and a learning experience.

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    Hs129B-2 1/48  SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32   IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48  Eduard Sikorsky JRS-1 1/72

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

Hello BE, I too just happened to find your new build. Your logs are instructive and very entertaining. If you don’t mind, I will pull up a chair and follow your build. Have a wonderful new year.

Current build: HMS Pegasus, English Pinnace (on hold)

Completed build: MS BluenoseSkippercraft

Link to comment
Share on other sites

Thanks Mike and Dave, and belated New year greetings to yourselves. :)

Post 6

That fairing business

Not done much work in the Shipyard since before Christmas, lacking some enthusiasm most probably because one of my least favourite aspects of a build is now required. Fairing seems to go on forever, and there is always the worry in the back of my mind that I may overdo it, and end up having to shim the bulkheads.

DSC04024.thumb.JPG.e9d79f559ec17b2497a0db94d2003ea6.JPG

4024

One needs a good supply of sanding sticks for this task and I've added to my supply a curved stick made from a strip of Yellow pine left over from a much earlier scratch build of a twelve gun Brig, put into ordinary for many years and then abandoned due to terminal wood worm.

The wood comes off pretty easily during the bevelling operation, but the devil is as always in the detail of the process.

DSC04469.thumb.JPG.4b594c721db1915896ade526483db42d.JPG

4469

I made a simple block jig to support the inverted hull whilst working.

DSC04467.thumb.JPG.8b733da156bf194aa99bdbd837ff3faf.JPG

4467

Once I reached the point where I felt there was a smoothish transition a walnut batten was pinned along the hull at gunport cill level.

DSC04474.thumb.JPG.bf5809f041667e9dd572f980f982c10a.JPG

4474

getting there I think, at least on the starboard side.

DSC04470.thumb.JPG.f56c98251a7755e4e11ec3057654f70d.JPG

4470

DSC04472.thumb.JPG.54f05ec55ec1cfb0101fb3d61ddcb580.JPG

4472

DSC04462.thumb.JPG.61d623bbc058f7b91ace42a9bada0698.JPG

4462

DSC04473.thumb.JPG.4255f97d9db16e81bef67c006577afbd.JPG

4473

The fairing continues, a further batten strip will be added at Wale level, and a third lower down.

 

B.E.

Link to comment
Share on other sites

Looks all neat and tidy B.E.

 

surely it will be a beautiful cutter....

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Link to comment
Share on other sites

Looking good. I am just a little bit ahead of you. The fairing itself isn’t too bad since the bulkheads are so close together. A suggestion if I may. If I were to do it over again, when It comes to installing the stern frames. Create some sort of jig so everything ends up where it is supposed to be in regards to alignment. I ended up ripping out the first set and replacing them. I still did it depending upon eyesight and a million measurements. I’m still fussing and tweaking things. I also placed sacrificial supports between the frames to be removed at a later point. This helps keeping things were they belong when fitting the gun ports. It also strengthens the area while fairing. Snapping one will break your heart. Been there. I actually discussed this with Chuck and he agrees. Hope this will lessen some anxiety when you reach that point.

 

Regards, 

Kurt

Edited by Kurt Johnson

Member: Ship Model Society of New Jersey

Link to comment
Share on other sites

Snapping a bulkhead extension is no problem at all. Just mate it to a brace that bridges the extension and body of the bulkhead. Placed on the side away from the gun port. Everything will be pretty much removed prior to inboard planking. Have two on mine, quite proud of them really. The bulkheads and profiles set on the shelf for 1 1/2 years and the entire thing developed a twist at the bow and stern. Deviateing 1/16” to the right at the bow and to the left at the stern 1/16”. Took some work, but she’s pretty much dead straight again. Snapping a stern frame is different, they remain exposed and have quite a bit of leverage just begging and pleading to be snapped until planked. Mine laid in wait and pounced on my shirt sleeve, they’re very devious.

 

Enjoy,

Kurt

Member: Ship Model Society of New Jersey

Link to comment
Share on other sites

Ah shirt sleeves, the bane of ship modellers, especially when it comes to masting and rigging :rolleyes: I shall take great care Kurt when it comes to those stern frames, a little way off yet I think.

Post 7

Fairing, fairing, and more fairing.

Another day of sand and check, sand and check, and for a bit of light relief, check and sand.

DSC04499.thumb.JPG.f16a59f5f4c312332f7cc6984b9bbe7c.JPG

4499

DSC04491.thumb.JPG.0922f31a1b40209fa75194a9b06ecaed.JPG

4491

DSC04502.thumb.JPG.175c623236fbd0cc123a910614b7410b.JPG

4502

The test strips seem to be sitting fair across the bulkheads, only the central four bulkheads seem to require no adjustment although they will have the char taken off.

At this point I think I can fit the batten strip to mark the gun port sills.

 

DSC04534.thumb.JPG.28158e41f16019021c63960bf4d7282f.JPG

4534

Seems to run with a fair curve, at least to my eye.

 

DSC04540.thumb.JPG.8d2e590f534ac4876fb142e63f30a3bd.JPG

4540

DSC04544.thumb.JPG.756a1675cab7d3db052fa3a02d1f789e.JPG

4544

With the port sills marked, the next stage beckons.

 

B.E.

18/01/2018

 

 

Link to comment
Share on other sites

Hi BE,

 

Your fairing looks spot on. Very nice.

Rusty

"So Long For Now" B) 

 

Current Builds: Speedwell

 

 

Completed Build Logs:  HMS Winchelsea 1/48   Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Very nice start on 'Cheerful'.  I like your heat bending setup!

Cheers,
 
Jason


"Which it will be ready when it is ready!"
 
In the shipyard:

HMS Jason (c.1794: Artois Class 38 gun frigate)

Queen Anne Royal Barge (c.1700)

Finished:

HMS Snake (c.1797: Cruizer Class, ship rigged sloop)

Link to comment
Share on other sites

Cheers Guys,:)

 

Post 8

Port Sills

I cut some ¼" square strips from some old Boxwood stuff I had to form the sills. The Proxxon Band saw and Surface planer proved very useful for this job.

DSC04620.thumb.JPG.cac5feb27cd058691c79da13aac077ff.JPG

4620

More of the stuff was used for the uprights following as far as possible the plan thicknesses, but there were differences in practice.

My approach was to fit the thinner uprights on each port and then using a port width template establish the broader upright thickness.

When it came to the forward port cut outs I allowed extra width and depth to allow for a Boxwood lining.

DSC04623.thumb.JPG.f9181d8faaa11cad076b5a912f9881ad.JPG4623

I used temporary guide strips for the upright cuts.

DSC04630.thumb.JPG.a1fa0f8750af43280994a81a9cf6c606.JPG

4630

Once the bulk was removed, easily done with razor saw diagonal cuts, I cleaned the bottom with a scalpel blade.

DSC04627.thumb.JPG.6e869c2265ed00b5aa15a5cce54089b6.JPG

4627

The port width template can be seen in this shot.

DSC04641.thumb.JPG.511fed013147228082923e39ee4b0f73.JPG

4641

The  linings were then glued into place.

DSC04637.thumb.JPG.dce7d7527f75161e228afc3f054ebe79.JPG

4637

DSC04638.thumb.JPG.2b3dc83b03dbb483ac7084db7401690a.JPG

4638

DSC04636.thumb.JPG.4250734db8f983e84b167b3d34f9469e.JPG

4636

DSC04644.thumb.JPG.ac10d5a988c92ccbe84235ab3c3aeba0.JPG

4644

The external port fairing now largely done, now need to consider the stern framing.

 

B.E.

24/01/2018

 

Link to comment
Share on other sites

Very interesting, BE.  I wouldn't have thought the balsa filler blocks would extend above the ports.  Is this common in your experience?

 

Cheers,

 

Martin

Current Build:  HMS FLY 1776

 

Previous Builds:  Rattlesnake 1781

                        Prince de Neufchatel

Link to comment
Share on other sites

Link to comment
Share on other sites

Post 9

Thinking about stern frames

Before I started on the stern frames I added short bracing sections of Walnut square stuff between those bulkheads not braced by the Port sills.

DSC04655.thumb.JPG.21d6a382a04c0d57624135e8428e5b3e.JPG

4655

The hull is now very stable without any flex in the bulkheads.

DSC04648.thumb.JPG.b93c1ea9fcc3c470d8bb9e406b723eb0.JPG

4648

getting the levels right for the outer frames

DSC04650.thumb.JPG.44449505fd414fecc5a8bcc165f1942d.JPG

4650

attaching the outer frame sections.

These frames are beautifully cut and fit together perfectly.

DSC04654.thumb.JPG.6b6665a02db77ddfb6557ec0a0045a9e.JPG

4654

Marking the approximate fairing line on the outer stern frames. This method of attaching a pencil stub to a wood strip I copied from Rustyj's Cheerful log, thanks Rusty, it worked a treat.

DSC04657.thumb.JPG.14515a84ed65d511df1f5b554449f1c8.JPG

4657

More fairing of the outer frames still required, but at this point I added the four internal frames.

DSC04668.thumb.JPG.d401297e7fc7fc234e48f85246248bf4.JPG

4668

I used a copy of the stern plan to check the set up, not exactly a perfect fit but it did align with frames 'Y' so I took those as the reference points to mark the height of the port frames.

DSC04672.thumb.JPG.40b100152346eb9312a062e5128ab2df.JPG

4672

At this point I think I will fit the port sills and lintels which will add a little stability to the quite fine inner frames.

B.E.

28/01/2018

Link to comment
Share on other sites

Hi B.E.

 

It looks like you've got the stern just right. Very nicely done!

Rusty

"So Long For Now" B) 

 

Current Builds: Speedwell

 

 

Completed Build Logs:  HMS Winchelsea 1/48   Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

She`s well under way B.E.,

 

and all the sequences done to date are looking very good...

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Link to comment
Share on other sites

Hi Steve, of course there is modelling life without Proxxon, just takes much longer by hand, but I would hate to give up my scroll saw in particular.

I do have the Crown wood set for Cheerful, but haven't used any as yet. I have a stock of old Boxwood that I've used thus far for the Port frames, and have some sheet stuff from :- http://www.originalmarquetry.co.uk/category_Saw_Cut_Veneers_3.htm

 

I planked both Pickle  and Pegasus using the Boxwood flat lines from the above company. Very useful 0.7mm thick strips in varying widths up to 10mm, and small square section stuff.

Cheers,

 

B.E.

 

 

Link to comment
Share on other sites

Post 10

Stern ports

The prospect of doing these was quite daunting and I trawled all available logs for photo's and approaches before I started.

My approach was as follows.

I firstly cut the strips for the sills to fit snugly between the frames.

DSC04676.thumb.JPG.4a2956ff067ce9aedcebbb4d2c907925.JPG

4676

Allowing for a small exterior over hang to take account of the transom curve, I marked the width taken from the plan, and cut it to size. I worked on the basis that the inner line was square to the frames and that the sill was level to the waterline.

I fitted one and checked it against the plan. With the pva semi set on the first sill I added the second sill, and matched it to the first again using the plan as a guide.

DSC04677.thumb.JPG.9eeaf82f06b80f01f328b7358e78cb58.JPG

4677

Checking the level of the sills.

DSC04680.thumb.JPG.29280f946e2317f7ad543e9513351b84.JPG

4680

A section of 'port' sized wood was formed to get the position for the Lintels. This was done once the sills had set.

The lintels were then cut to size and glued into place using the top of the port  'jig' as a guide.

DSC04736.thumb.JPG.e804b865b8dc921e41d843d6e23a18e3.JPG

4736

Both sills and lintels were then sanded to conform to the stern frames.

DSC04820.thumb.JPG.d8036d738edab00454f9d8f49b594eeb.JPG

4820

The moment of truth, will the plan template fit.

Not really a shot in the dark, I used several copies of the template to check progress as work progressed.

DSC04819.thumb.JPG.5862d73e51c22624a3410ca4537156bc.JPG

4819

Seems to fit fairly well.

DSC04825.thumb.JPG.99f253b7c667f73696fadb6f907c9b89.JPG

4825

DSC04827.thumb.JPG.c4b1c24872ebb2232522e34a008b089c.JPG

4827

DSC04828.thumb.JPG.825d8e7d4c12b336e8dd099c12dacc78.JPG

4828

DSC04829.thumb.JPG.bc800f02a31e155898282ee56b82f0b4.JPG

4829

Moving onto the Square tuck piece next, then back to a little more fairing and fine sanding.

 

B.E.

31/01/2018

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...