KORTES Posted January 13, 2019 Author #241 Posted January 13, 2019 Thank you very much Johann. Your work is also gorgeous and I admire your craftsmanship a lot. My best regards, Alexander. Keith Black and mtaylor 2 Quote
KORTES Posted January 13, 2019 Author #242 Posted January 13, 2019 The second, stage. Now, after the oil has lighted some previously unnoticed defects, I will try to eliminate them using card scraper and sand paper Ondras71, Valeriy V, grsjax and 15 others 18 Quote
druxey Posted January 13, 2019 #243 Posted January 13, 2019 Your model is looking more and more attractive! Keith Black, mtaylor, G.L. and 2 others 5 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
KORTES Posted January 21, 2019 Author #244 Posted January 21, 2019 Thank you, dear druxey, for such warm words. mtaylor 1 Quote
KORTES Posted January 21, 2019 Author #245 Posted January 21, 2019 A small vacation has passed by. This time has served to dry the model. I have processed with scotch brite and steel wool. Keith Black, Jack12477, Ondras71 and 11 others 14 Quote
KORTES Posted January 21, 2019 Author #246 Posted January 21, 2019 To my point of view – the color – calico shine. muratx, Richard Griffith, GrandpaPhil and 17 others 20 Quote
wefalck Posted January 21, 2019 #247 Posted January 21, 2019 (edited) 5 minutes ago, KORTES said: To my point of view – the color – calico shine. I think something has been lost in translation here ... at least I don't understand what is meant. Calico is a kind of cotton - did you mean you polished it with a cotton rag ? Edited January 21, 2019 by wefalck mtaylor 1 Quote wefalck panta rhei - Everything is in flux
Michel Bénard Posted January 21, 2019 #248 Posted January 21, 2019 Very nice model, good job !!! mtaylor and Keith Black 2 Quote
G.L. Posted January 21, 2019 #249 Posted January 21, 2019 Beautiful patina! Well done. mtaylor and BETAQDAVE 2 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
KORTES Posted January 21, 2019 Author #250 Posted January 21, 2019 1 hour ago, wefalck said: I think something has been lost in translation here ... at least I don't understand what is meant. Calico is a kind of cotton - did you mean you polished it with a cotton rag ? Calico shine. Its a slang term. In the region where I live it means the shine somewhere between the mat and the glossy one. My best regards. mtaylor, paulsutcliffe and BETAQDAVE 3 Quote
wefalck Posted January 21, 2019 #251 Posted January 21, 2019 Ah, OK. In English one refers to this as 'satin' and in German we say 'silk' shine. BETAQDAVE, paulsutcliffe and mtaylor 3 Quote wefalck panta rhei - Everything is in flux
Valeriy V Posted January 22, 2019 #252 Posted January 22, 2019 18 hours ago, KORTES said: Calico shine. Its a slang term. In the region where I live it means the shine somewhere between the mat and the glossy one. My best regards. Alexander, your work is great! Perhaps it means SATIN ? BETAQDAVE, paulsutcliffe and KORTES 3 Quote
KORTES Posted January 23, 2019 Author #253 Posted January 23, 2019 Yes, Valeriy, You're right, probably satin would be a more correct way to say. My best regards. mtaylor, Valeriy V and BETAQDAVE 3 Quote
KORTES Posted January 23, 2019 Author #254 Posted January 23, 2019 I’m working on spars and steel. Spars. Chasseur, Landlubber Mike, Keith Black and 9 others 12 Quote
KORTES Posted January 23, 2019 Author #255 Posted January 23, 2019 Hand-made lathework. vossiewulf, Chasseur, Jack12477 and 9 others 12 Quote
KORTES Posted January 23, 2019 Author #256 Posted January 23, 2019 Since I had troubles connecting can hook binding to the wood, I had to strengthen the knot by means of metal pintle. paulsutcliffe, GrandpaPhil, Chasseur and 3 others 6 Quote
Keith Black Posted January 23, 2019 #257 Posted January 23, 2019 What type of metal and did you start from straight round stock or did you refine an existing shape? Fantastic quality of work on your build. Thank you for sharing........Keith mtaylor and BETAQDAVE 2 Quote Current Builds: 1870's Sternwheeler, Lula Wood Hull Screw Frigate USS Tennessee Decorative Carrack Warship Restoration, the Amelia Completed: 1880s Floating Steam Donkey Pile Driver Early Swift 1805 Model Restoration
KORTES Posted January 23, 2019 Author #258 Posted January 23, 2019 Mastkoker assembled DORIS, G.L., druxey and 26 others 28 1 Quote
michael mott Posted January 23, 2019 #259 Posted January 23, 2019 Absolutely lovely workmanship Kortes. Michael mtaylor, BETAQDAVE and Keith Black 3 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
flying_dutchman2 Posted January 23, 2019 #260 Posted January 23, 2019 Wonderful metal work. Marcus mtaylor, BETAQDAVE and Keith Black 3 Quote Current Built: Zeehaen 1639, Dutch Fluit from Dutch explorer Abel J. Tasman Unofficial motto of the VOC: "God is good, but trade is better" Many people believe that Captain J. Cook discovered Australia in 1770. They tend to forget that Dutch mariner Willem Janszoon landed on Australia’s northern coast in 1606. Cook never even sighted the coast of Western Australia).
Valeriy V Posted January 23, 2019 #261 Posted January 23, 2019 Alexander, you work very carefully. I know how difficult it is to turn small parts out of ferrous metal, you do it perfectly. Keith Black, mtaylor and BETAQDAVE 3 Quote
KORTES Posted January 23, 2019 Author #262 Posted January 23, 2019 33 minutes ago, Keith Black said: What type of metal and did you start from straight round stock or did you refine an existing shape? Fantastic quality of work on your build. Thank you for sharing........Keith My greetings, dear Keith Black. As I don't have a lathe machine, I had to lathe these pieces from several nails using a drill . GrandpaPhil, BETAQDAVE, tkay11 and 2 others 5 Quote
BETAQDAVE Posted January 23, 2019 #263 Posted January 23, 2019 Outstanding iron work here! mtaylor and Keith Black 2 Quote Dave “You’ve just got to know your limitations” Dirty Harry Current Builds: Modified MS 1/8” scale Phantom, and modified plastic/wood hybrid of Aurora 1:87 scale whaling bark Wanderer. Past Builds: (Done & sold) 1/8” scale A.J. Fisher 2 mast schooner Challenge, 1/6” scale scratch built whaler Wanderer w/ plans & fittings from A.J. Fisher, and numerous plastic kits including 1/8” scale Revell U.S.S. Constitution (twice), Cutty Sark, and Mayflower. (Done & in dry dock) Modified 1/8” scale Revell U.S.S. Constitution w/ wooden deck and masting [too close encounter w/conc. floor in move] Hope to get to builds: MS 3/16” scale Pride of Baltimore II, MS 1/2” scale pinky schooner Glad Tidings, a scratch build 3/16” scale Phantom, and a scratch build 3/16" scale Denis Sullivan.
Keith Black Posted January 24, 2019 #264 Posted January 24, 2019 7 hours ago, KORTES said: I had to lathe these pieces from several nails using a drill I also have to use my drill as a lathe but I can't come close to your workmanship. Sir, I am in awe! druxey, BETAQDAVE, paulsutcliffe and 1 other 4 Quote Current Builds: 1870's Sternwheeler, Lula Wood Hull Screw Frigate USS Tennessee Decorative Carrack Warship Restoration, the Amelia Completed: 1880s Floating Steam Donkey Pile Driver Early Swift 1805 Model Restoration
vossiewulf Posted January 24, 2019 #265 Posted January 24, 2019 Great joinery and a very spiffy little carving as well. mtaylor, Keith Black, BETAQDAVE and 3 others 6 Quote Building HM Cutter Lady Nelson 1:64
KORTES Posted January 25, 2019 Author #266 Posted January 25, 2019 Thank you, my esteemed colleagues, for attention to my work. My best regards. mtaylor and BETAQDAVE 2 Quote
KORTES Posted January 25, 2019 Author #267 Posted January 25, 2019 Masttop. I couldn’t find a Dutchman name, but it’s probably a weathervane. prutser, paulsutcliffe, muratx and 10 others 13 Quote
KORTES Posted January 25, 2019 Author #268 Posted January 25, 2019 (edited) Boom. Edited January 25, 2019 by KORTES Keith Black, druxey, bruce d and 7 others 10 Quote
KORTES Posted January 25, 2019 Author #269 Posted January 25, 2019 Gaffel. G.L., BETAQDAVE, wefalck and 13 others 16 Quote
wefalck Posted January 25, 2019 #270 Posted January 25, 2019 Don't forget the holes in the lower part for attaching the sail ... beautifully done - as always 👍 I mean this: From my Botter in 1:90 scale ... quite a bit smaller. paulsutcliffe, mtaylor, Keith Black and 5 others 8 Quote wefalck panta rhei - Everything is in flux
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.