Jump to content

San Ildefonso by Sjors - FINISHED - OcCre - 1:70


Recommended Posts

Thanks Wolf  :D

 

Nice Avatar…...

They have found earlier this week a dead wolf in the Netherlands.

For the first time in 150 years they are back…..( at least that's what they are thinking )

 

animaatjes-sjors-94584.gif

Link to comment
Share on other sites

Small update time with pictures again  :D

 

Dry fit the deck cannons to see how it looks.

They need the breach rope , so that's for later.

First I have to drill a few ( 40 ) holes for eyebolts and rings behind the cannons.

No, I'm not going to rig all the cannons.

Just the breach rope...

I know, I'm lazy !

Also make the gun port lids on the starboard side and place all the cannons.

Then finally I make the stairs against the hull so they can climb on board.

Both sides are done with that.

 

animaatjes-sjors-94584.gif

post-48-0-07058200-1373619170_thumb.jpg

post-48-0-42300100-1373619174_thumb.jpg

post-48-0-03216600-1373619203_thumb.jpg

post-48-0-03019300-1373619207_thumb.jpg

post-48-0-86363900-1373619221_thumb.jpg

post-48-0-60991400-1373619228_thumb.jpg

Link to comment
Share on other sites

Link to comment
Share on other sites

NOW.....the cannons look great on the deck Sjors.......I can say that now without feeling like a fool  :)  to tell the truth Sjors......I thought the same thing about the hand rails.......then think of what they are,  and it all becomes clear ;)    have you been doing some gun practice already?..........I see a few cannon balls missing  :)    {I see what looks like a BB hole in the first picture}........momma's not gonna like this :ph34r:

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Guns look great Sjors , nicely centered.  Don't tell everyone you're lazy just because you only intend to rig the breech ropes ---- that's what I did :D  :D

Augie

 

Current Build: US Frigate Confederacy - MS 1:64

 

Previous Builds :

 

US Brig Syren (MS) - 2013 (see Completed Ship Gallery)

Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery)

Victory Cross Section (Corel) - 1988

Essex (MS) 1/8"- 1976

Cutty Sark (Revell 1:96) - 1956

Link to comment
Share on other sites

On the wolves (just to screw up YOUR thread), you had better start putting out something for them to eat.  I can't imagine that the Netherlands has enough wild critters available to satisfy wolves!

 

Oh ----- they don't like popcorn unless you pour some nice bacon grease over it :D

 

And I do have some freshly caught fish I can send over !

Edited by Augie

Augie

 

Current Build: US Frigate Confederacy - MS 1:64

 

Previous Builds :

 

US Brig Syren (MS) - 2013 (see Completed Ship Gallery)

Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery)

Victory Cross Section (Corel) - 1988

Essex (MS) 1/8"- 1976

Cutty Sark (Revell 1:96) - 1956

Link to comment
Share on other sites

Looking good Sjors

Cannon are really looking mean

Decks fitted out beautifully

Great work

 

Keep it up  :10_1_10: 

Mick

<p><strong><span style="font-family:'times new roman', times, serif;"><span style="font-size:18px;">Keep it up :10_1_10:</span></span><span style="font-size:18px;font-family:'times new roman', times, serif;"> </span></strong></p>

<p><strong><span style="font-size:18px;font-family:'times new roman', times, serif;">Mick</span></strong></p>

<p> </p>

<p><span style="font-size:12px;"><span style="font-family:'times new roman', times, serif;">Current Build --- Will Everard --- </span><a data-ipb='nomediaparse' href='http://modelshipworld.com/index.php?/topic/3636-will-everard-by-micklen32-billing-boats-167/'>http://modelshipworld.com/index.php?/topic/3636-will-everard-by-micklen32-billing-boats-167/</a></span></p>

<p><span style="font-size:12px;">Current Build --- Endeavour --- <a data-ipb='nomediaparse' href='http://modelshipworld.com/index.php?/topic/2804-hmb-endeavour-by-micklen32-occre-154/'>http://modelshipworld.com/index.php?/topic/2804-hmb-endeavour-by-micklen32-occre-154/</a></span></p>

<p> </p>

<p><span style="font-size:12px;">Completed --- Guitar --- <a data-ipb='nomediaparse' href='http://micksjem.blogspot.co.uk/'>http://micksjem.blogspot.co.uk/</a></span></p>

<p><span style="font-size:12px;">Completed --- Barcelona Taxi --- <a data-ipb='nomediaparse' href='http://micklen-taxi.blogspot.co.uk/'>http://micklen-taxi.blogspot.co.uk/</a></span></p>

<p><span style="font-size:12px;">Completed --- London Tram --- <a data-ipb='nomediaparse' href='http://micklen-tram.blogspot.co.uk/'>http://micklen-tram.blogspot.co.uk/</a></span></p>

<p><span style="font-size:12px;">Completed --- OcCre Mississippi --- <a data-ipb='nomediaparse' href='http://modelshipworld.com/index.php?/topic/1803-spirit-of-mississippi-by-micklen32-occre-180-a-hopefully-accurate-rendition/'>http://modelshipworld.com/index.php?/topic/1803-spirit-of-mississippi-by-micklen32-occre-180-a-hopefully-accurate-rendition/</a></span>

Link to comment
Share on other sites

Thanks all  :D

 

@ Popeye,

Are you looking at those pictures with a magnifier??????

You are right, some cannon balls are missing.

I have to fire a few shots to see if they are in range  :D

But no worries, there are coming new ones…...

 

@ Augie,

 

I shall not tell anybody that we are lazy !

Maybe the Wolf eat some popcorn because she is not alive anymore  :(

And you catch some fish….picture of it ? Please?

 

@ Randy, Thanks…..

I thought that politician are predators…...

The eat my money the whole time  :(

 

@ Andy,

 

Thank you SIR !

 

I just keep the cannons brass.

When I paint or blackened them I have also the false cannons to do.

And they are already glued…...

So I keep it this way.

 

@ Mick,

 

Thank you also.

 

animaatjes-sjors-94584.gif

Link to comment
Share on other sites

Hi Sjors.... yes , I just got back from planet zephyr........ very interesting trip :D ........ the guns on deck are looking very anxious !!....by the way, are you going to blacken them ?.... just wondering, you don't have to, but if it were my ship, and my guns, I would blacken them, but then again, it's not my ship, and they are not my guns, so, you do as you like because that is your ship and they are your guns and you are the "CAPTAIN" :P  :P ..... all joking aside....... paint them black!!!! :D  :D  :D  :D  :D :D  ( just kidding Sjors) 

Frank

completed build: Delta River Co. Riverboat     HMAT SUPPLY

                        

                         USRC "ALERT"

 

in progress: Red Dragon  (Chinese junk)

                      

Link to comment
Share on other sites

OK .... leave them brass...... :angry: !!!!!! :angry:  :angry:

completed build: Delta River Co. Riverboat     HMAT SUPPLY

                        

                         USRC "ALERT"

 

in progress: Red Dragon  (Chinese junk)

                      

Link to comment
Share on other sites

Frank, you are forgiven……….

Still I don't paint them black !!!!!!!!!!!! :D  :D  :D  :D  :D  :D  :D  :D  :D  :D  :D  :D

I promise you….next build the cannons are black !

I just keep it this way.

How is the Supply????????

Still at the rigging part?

Or……….( don't tell me that you not have working to her )

 

animaatjes-sjors-94584.gif

Link to comment
Share on other sites

Frank, you are forgiven……….

Still I don't paint them black !!!!!!!!!!!! :D  :D  :D  :D  :D  :D  :D  :D  :D  :D  :D  :D

I promise you….next build the cannons are black !

I just keep it this way.

How is the Supply????????

Still at the rigging part?

Or……….( don't tell me that you not have working to her )

 

animaatjes-sjors-94584.gif

 

Answer to your questions: first one SAME...... second one......YES..... third one( Or).... no, I won't tell you that I'm still not working on her :(

But, I think today is the day when I start to finish her up. Enough wasted time :D  :D (?????????)

completed build: Delta River Co. Riverboat     HMAT SUPPLY

                        

                         USRC "ALERT"

 

in progress: Red Dragon  (Chinese junk)

                      

Link to comment
Share on other sites

Sjors,

Nice work on the ladders and guns.  She's coming along beautifully.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Sjors,

 

The guns (and ship) look impressive.

Regards,

Larry

----------------------------------------------------

Current Build

US Brig Niagara

Completed Builds

George W Washburn - 1890 Tugboat

Future Builds

18th Century Longboat by MS

HM Cutter Cheerful

Wappen Von Hamburg by Corel

 

If your not making mistakes, your not challenging yourself – my life has been full of challenges :)

Link to comment
Share on other sites

The guns really look good Sjors, I really like the brass. But being an old salt, I like brass as long as someone else is polishing it. RHIP!!!

John

Current Current Builds:

US Brig Niagara on my website

FINISHED BUILD LOGS:

New Bedford Whaleboat - page on my Morgan Website:  http://www.charleswmorganmodel.com/whaleboat-build-log-by-john-fleming.html

C.W. Morgan - Model Shipways 1:64 http://modelshipworld.com/index.php?/topic/1785-cw-morgan-by-texxn5-johnf-ms-164-kit/

USS Constitution - Revell 1:96 http://modelshipworld.com/index.php?/topic/1796-uss-constitution-by-texxn5-johnf-revell-196-kit/

 

website US Brig Niagara Model http://www.niagaramodel.com

website Charles W Morgan Model http://www.charleswmorganmodel.com

website PROXXON DISCOUNT TOOL STORE http://proxxontoolsdiscount.com

Link to comment
Share on other sites

Do I hear the sound of distant war drums beating, you have the guns Sjors but do you have enough balls to conduct a longgggggggggggggg fight, I wonder. :10_1_10:

 

Guns are looking good my friend.

 

mobbsie

mobbsie
All mistakes are deliberate ( me )


Current Build:- HMS Schooner Pickle

 

Completed Builds :-   Panart 1/16 Armed Launch / Pinnace ( Completed ),  Granado Cross Section 1/48

Harwich Bawley, Restoration,  Thames Barge Edme, Repair / Restoration,  Will Everard 1/67 Billings 

HMS Agamemnon 1781 - 1/64 Caldercraft KitHM Brig Badger,  HM Bomb Vessel Granado,
Thames Steam Launch Louise,  Thames Barge Edme,  Viking Dragon Boat


Next Build :-  

Link to comment
Share on other sites

Link to comment
Share on other sites

Thanks Wolf  :D

 

Nice Avatar…...

They have found earlier this week a dead wolf in the Netherlands.

For the first time in 150 years they are back…..( at least that's what they are thinking )

 

animaatjes-sjors-94584.gif

Thanks Sjors.  Like I told Augie, it’s a photo of Canis Lupis Lupaster, or the Egyptian Wolf.  They are critically endangered and the sheer tenacity needed for them to survive in an arid region (and man's brutality) captivates me.  I hope they survive us all.

 

Your cannons look fantastic!  Where do you find all the time to build?

Wolf

 

Current build : San Francisco II (AL)

Link to comment
Share on other sites

Nope......not me.  Not going to say a word about spherical proliferation :pirate41:

Augie

 

Current Build: US Frigate Confederacy - MS 1:64

 

Previous Builds :

 

US Brig Syren (MS) - 2013 (see Completed Ship Gallery)

Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery)

Victory Cross Section (Corel) - 1988

Essex (MS) 1/8"- 1976

Cutty Sark (Revell 1:96) - 1956

Link to comment
Share on other sites

Thanks everyone  :D

 

@ Sherry,

 

I will do your cannons if you bring them by your self  :D  :D  :D  :D

 

@ Mark,

Thank you…..

I see you finished your coffee?

 

@ Thanks Larry  :D

 

@ John,

 

I have someone in the house  :D  :D  :D  :D  :D  :D

Auch…..She hit me !!!!!!

 

@ Edwin,

 

Thank you for saying that I'm not lazy  :D  :D

I almost believe it myself…..

 

@ Mobbsie,

 

Back from the holidays and doing ugly to me?  :(  :D

No worries, I have enough spare cannon balls…..

And i don't play drums !

 

@ Grant,

 

It wasn't me…..honestly !

This time Mobbsie started  :P

 

@ Wolf,

 

Thanks for telling me a few things about the Wolf!

It's a great animal!

Where I found the time…..I'm not searching it but just have it  :D

When I'm in the week free of work and Anja is working, the only thing that I can do is building  :D

( I know Anja's answer all ready….do some house keeping )

 

@ Augie,

 

With you I can talk  :D  :D  :D  :D  :D

Thanks my friend!

 

animaatjes-sjors-94584.gif

Link to comment
Share on other sites

Your ship is progressing very nicely, Sjors.  You should feel pretty danged good about the way she is looking - and I do not polish brass!!!!

 

i understand that cotton balls (which, rumor has it, you have a large quantity in reserve) can be used for the detail parts of house cleaning (gotta keep Anja hapy, you know!).

Wayne

Neither should a ship rely on one small anchor, nor should life rest on a single hope.
Epictetus

Link to comment
Share on other sites

Wayne,

 

I feel indeed happy with how she looks.

There are few thing that I can do better but that's for the next one.

 

I always keeps Anja happy  :D

If the time is there that the house keeping is on order, I help her…...

I clean up the hobby room  :D  :D  :D  :D  :D

( in the mean while a little building because she don't see it…..)

 

animaatjes-sjors-94584.gif

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...