allanyed Posted December 11, 2021 Share #31 Posted December 11, 2021 Your model really does look super Tom. One question, hope you don't mind. What diameter are the treenails for the deck planks? I believe that at your scale they would normally be between 0.015" and 0.02" diameter (3/4"-1" full size). Thanks Allan mtaylor 1 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU Link to comment Share on other sites More sharing options...
cafmodel Posted December 16, 2021 Author Share #32 Posted December 16, 2021 Sorry for your late reply The deck width is 5mm, or 0.02 inch But several are 6mm wide,Because there are some special width in the plans, I don't know the specific reasons, so I can only make it according to the plan at present If I guess right, is this a particularly reinforced structure JeffT, James H and mtaylor 3 Quote Link to comment Share on other sites More sharing options...
cafmodel Posted December 16, 2021 Author Share #33 Posted December 16, 2021 scrubbyj427, Kevin, mtdoramike and 9 others 10 2 Quote Link to comment Share on other sites More sharing options...
scrubbyj427 Posted December 16, 2021 Share #34 Posted December 16, 2021 Awesome carvings Tom! What software are you sculpting with? JeffT and mtaylor 2 Quote Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
cafmodel Posted December 17, 2021 Author Share #35 Posted December 17, 2021 zBrush scrubbyj427 and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
cafmodel Posted February 6, 2022 Author Share #36 Posted February 6, 2022 Start work at the end of the holiday VTHokiEE, Ryland Craze, Alexander Bulimov and 6 others 9 Quote Link to comment Share on other sites More sharing options...
cafmodel Posted March 7, 2022 Author Share #37 Posted March 7, 2022 Fernando E, scrubbyj427, markjay and 9 others 8 4 Quote Link to comment Share on other sites More sharing options...
cafmodel Posted March 10, 2022 Author Share #38 Posted March 10, 2022 I'm very sorry, friends Granado's third quarter sales have been delayed The third quarter of Granado is expected to be sold in March. Now it will be postponed to the end of April We have added many CNC double-sided engraving parts, which can provide better effect JeffT, mtaylor, mtdoramike and 3 others 4 2 Quote Link to comment Share on other sites More sharing options...
HardeeHarHar Posted March 14, 2022 Share #39 Posted March 14, 2022 (edited) Any updates on release of the other two parts of the kit? Edit: [Doh, I just read above where part 3 is delayed until April. It is looking like a beautiful kit, and since I am no where starting part I, I will buy part 2 and 3 and place them carefully on the shelf alongside part I. If some other adventurous and more talented builders take on the exploded view and offer their build logs up for duplication, then I may try to make the exploded view over what ever time I have left on this planet. I'm likely to need all of it to do this kit justice. Great work!!!] Edited March 17, 2022 by HardeeHarHar mtaylor and Canute 2 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model Link to comment Share on other sites More sharing options...
jmlyle Posted March 31, 2022 Share #40 Posted March 31, 2022 The kit looks great but I have friends who have been burned by Chinese made kits before. The parts didn't fit well, the wood quality was poor and warped plus instructions were horrible. This is why I am reluctant to purchase Chinese kits. From the photos the kits does look good. Are CAF kits of a high quality? I would like to buy one and I like the idea of buying it in sections but as I said I am a bit skittish about Chinese kits. Quote Link to comment Share on other sites More sharing options...
scrubbyj427 Posted March 31, 2022 Share #41 Posted March 31, 2022 50 minutes ago, jmlyle said: The kit looks great but I have friends who have been burned by Chinese made kits before. The parts didn't fit well, the wood quality was poor and warped plus instructions were horrible. This is why I am reluctant to purchase Chinese kits. From the photos the kits does look good. Are CAF kits of a high quality? I would like to buy one and I like the idea of buying it in sections but as I said I am a bit skittish about Chinese kits. @jmlyle CAF is a legit Chinese company and Tom appears to do a great job designing his own models and supporting his kits. The other Chinese kits you are referring to are likely pirated ones and therefore would be a mess. There are several build logs going on right now, you should check them out and decide for yourself. I will take a stab at one in the near future, just not sure which yet. But there are many on MSW that are satisfied with them. Canute, JeffT and mtaylor 3 Quote Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
JeffT Posted March 31, 2022 Share #42 Posted March 31, 2022 I recently began working on this particular kit and so far have had no issues. Canute and mtaylor 2 Quote Jeff In progress: Medway Longboat 1742 - Syren Ship Model Company -1/2" scale USS Constitution - Model Shipways - Scale 1:76 HMS Granado - CAF Model - 1:48 HMS Sphinx - Vanguard Link to comment Share on other sites More sharing options...
jmlyle Posted April 1, 2022 Share #43 Posted April 1, 2022 (edited) Thanks for answering my questions. It really does look to be a good kit. I am building a scratch built 1/24 scale cross section of the Granado and a fully framed hull POF model is very tempting. Edited April 28, 2022 by jmlyle Spelling mistake Canute and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
cafmodel Posted April 9, 2022 Author Share #44 Posted April 9, 2022 Hello everyone At present, 90% of Granado's work has been completed, and all wooden parts have been produced Sales were originally expected to start at the end of April However, the epidemic situation in Shanghai is very serious. We began martial law on March 28. The original martial law plan lasted until April 5, but it is still under martial law Some uncertain news said that the return lasted until May 11 Therefore, during this period, we cannot obtain castings and etched pieces (Granado contains a large number of fine castings) So at present, we can only delay sales. Please forgive me Tom VTHokiEE, Canute, JeffT and 4 others 3 4 Quote Link to comment Share on other sites More sharing options...
scrubbyj427 Posted April 9, 2022 Share #45 Posted April 9, 2022 Granado Looks very good Tom, well done on splitting the hull. Ryland Craze, mtaylor, JeffT and 1 other 4 Quote Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
mtaylor Posted April 9, 2022 Share #46 Posted April 9, 2022 There is nothing you need to ask forgiveness for, Tom. The virus has been very disruptive to everyone's life. The prototype looks very good. Canute, Fernando E and JeffT 3 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
cafmodel Posted April 24, 2022 Author Share #47 Posted April 24, 2022 For your safety, please leave China as soon as possible Canute and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
cafmodel Posted April 24, 2022 Author Share #48 Posted April 24, 2022 We are still isolated at home and can't go out The number of people infected by the epidemic is still 20000 per day Therefore, according to the analysis of the current situation, we are still unable to obtain freedom for a while The situation is deteriorating, and the epidemic is also breaking out in other cities except Shanghai, so the whole city may be under martial law at any time When will it end? I think only God and politics can know Tom In Shanghai China mtaylor, James H, scrubbyj427 and 5 others 2 6 Quote Link to comment Share on other sites More sharing options...
mtaylor Posted April 24, 2022 Share #49 Posted April 24, 2022 I hope you stay safe, Tom. The news is saying the situation is chaotic at this point which is very worrying. Canute and Jack12477 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
JeffT Posted April 24, 2022 Share #50 Posted April 24, 2022 Sorry to hear you have to go through this Tom Canute and mtaylor 2 Quote Jeff In progress: Medway Longboat 1742 - Syren Ship Model Company -1/2" scale USS Constitution - Model Shipways - Scale 1:76 HMS Granado - CAF Model - 1:48 HMS Sphinx - Vanguard Link to comment Share on other sites More sharing options...
cafmodel Posted April 25, 2022 Author Share #51 Posted April 25, 2022 (edited) Red vortex, I can't breathe Edited April 25, 2022 by cafmodel JeffT, ccoyle, Canute and 2 others 2 3 Quote Link to comment Share on other sites More sharing options...
cafmodel Posted April 25, 2022 Author Share #52 Posted April 25, 2022 JpR62, mtaylor, ccoyle and 4 others 7 Quote Link to comment Share on other sites More sharing options...
cafmodel Posted April 25, 2022 Author Share #53 Posted April 25, 2022 (edited) 8 hours ago, cafmodel said: 💀 Edited April 25, 2022 by cafmodel mtaylor and Fernando E 2 Quote Link to comment Share on other sites More sharing options...
cafmodel Posted May 17, 2022 Author Share #54 Posted May 17, 2022 Wacom, Ryland Craze, Kevin and 7 others 10 Quote Link to comment Share on other sites More sharing options...
James H Posted May 17, 2022 Share #55 Posted May 17, 2022 That looks real good Tom. I hope your supply issues are sorted very soon. mtaylor 1 Quote SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! On the bench: HMS Harpy - 1796 (production prototype) - Vanguard Models - 1:64 On Hold: HMS Winchelsea Double Capstan - Syren Ship Models - 1:48 Finished US Baltimore Armed Privateer Schooner Grecian 1812 (prototype) - Vanguard Models - 1:64 'Zulu' fishing boat, Vanguard Models - 1:64 Fifie' fishing boat, Vanguard Models - 1:64 HMS Flirt 1782, Vanguard Models - 1:64. Duchess of Kingston c.1780 - Vanguard Models - 1:64 HMS Sphinx 1775, Vanguard Models - 1:64 ERYCINA - Plymouth Ketch-Rigged Trawler 1882, Vanguard Models - 1:64. 'Nisha' - The Brixham 'Mumble-Bee' - Vanguard Models 1:64 'Saucy Jack' fishing boat - Vanguard Models - 1:64 Ranger 'Barking Fish Carrier' - 1864 - Vanguard Models - 1:64 HMS Indefatigable - 1794 (production prototype), Vanguard Models - 1:64. Indeterminate: Tender Avos - Master Korabel - 1:72. H.M.S. Victory (production prototype) - Amati - 1:64. HMS Granado 1742 (cross section) - CAFModel - 1:48 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.