Jump to content

Frigate Essex by Rafine - FINISHED - Model Shipways - Kitbashed


Recommended Posts

Link to comment
Share on other sites

Guest Tim I.

Thanks so much Mike. I noticed the same thing about the catalogue. Sadly, it probably means there are still problems.

 

Bob

 

From the conversation I had to Model Expo (In respect to my back-order), they are unsure when they will be shipping the updated kits.

 

- Tim 

Link to comment
Share on other sites

Link to comment
Share on other sites

Link to comment
Share on other sites

I've now done the channels and the remainder of the hull moldings on the port side. I had considered using the kit laser cut channel pieces, since I intended to paint them black, but found that the spacing for the chainplate notches didn't fit the spacing of my gun ports. It's hard to know at this point why that turned out to be the case. In any event, I ended up making them from boxwood strip, sanded to fit the hull. The channels were pinned and glued to the hull. I did use the kit laser cut pieces for the tiny support knees. The moldings, as with the prior pieces, are boxwood strip sanded to a simple half round shape, wet heat bent to fit the hull and painted black.

 

Next, I'll do this work again on the starboard side.

 

Bob

post-186-0-74867300-1408626453_thumb.jpg

post-186-0-75827900-1408626521_thumb.jpg

post-186-0-46601400-1408626590_thumb.jpg

post-186-0-71845600-1408626703_thumb.jpg

post-186-0-16744500-1408626767_thumb.jpg

post-186-0-94319700-1408627104_thumb.jpg

Link to comment
Share on other sites

Beautiful is the only word I can think of Bob. I just love seeing your update shots.

Link to comment
Share on other sites

What a beautiful model!!  Other than that, I am speechless.

Ken

 

NO PIRACY 4 ME! (SUPPORTING CHUCKS' IDEA)

 

Current Build:  

Washington 1776 Galley

Pilot Boat Mary of Norfolk

Completed Builds:

Continental Boat Providence   (from Completed Gallery)  (from MSW Build)

Continental Ship Independence  (from Completed Gallery)  (from MSW Build)

Rattlesnake   (from Completed Gallery)  (from MSW Build)

Armed Virginia Sloop  (from Completed Gallery)

Fair American (from Completed Gallery)  (from MSW Build Log)

 

MemberShip Model Society of New Jersey

                  Nautical Research Guild

Link to comment
Share on other sites

In reply 886 above frolick mentioned the 'newbie' - I'm not the newbie but I agree with the sentiment - your work is awesome.

I think you mentioned in an earlier entry about replacing unuseable stock material with boxwood, where did you procure it??? Refresh my memory - I'm working on Young America right now and need some scale lumber in the worst way.

  thanks for the posts/tutorial/guidance/inspiration!!!

   Steve

Link to comment
Share on other sites

Thanks so much Grant, Ken, Janos and Steve for your very generous comments. Thanks also to the "likes".

 

Steve, I get all of my wood from Hobbymill (link on MSW ).

 

Bob

Link to comment
Share on other sites

The starboard channels and moldings are now done. Everything was done identically to the previously completed port side and will not be repeated.

 

I think that I've about run out of excuses to not do the head work and may just have to start doing it now.

 

Bob

post-186-0-33846200-1409226827_thumb.jpg

post-186-0-51946400-1409226870_thumb.jpg

post-186-0-26967200-1409226925_thumb.jpg

post-186-0-25119800-1409226978_thumb.jpg

post-186-0-28839800-1409227030_thumb.jpg

Link to comment
Share on other sites

Beautifully done.  Looking forward to the head.

 

And congrats on what appears to be her 1 year anniversary!

Augie

 

Current Build: US Frigate Confederacy - MS 1:64

 

Previous Builds :

 

US Brig Syren (MS) - 2013 (see Completed Ship Gallery)

Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery)

Victory Cross Section (Corel) - 1988

Essex (MS) 1/8"- 1976

Cutty Sark (Revell 1:96) - 1956

Link to comment
Share on other sites

Thanks so much Dirk, Augie and Tim.

 

Dirk, I wish that I had as much confidence as you do.

 

This is a big weekend Augie -- Essex turns 1 and I turn 75.

 

Bob

Link to comment
Share on other sites

Link to comment
Share on other sites

Gee, too many old guys around here.  I won't even be 70 until ....... November  :D  :D

 

Many happy returns, Bob.

Augie

 

Current Build: US Frigate Confederacy - MS 1:64

 

Previous Builds :

 

US Brig Syren (MS) - 2013 (see Completed Ship Gallery)

Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery)

Victory Cross Section (Corel) - 1988

Essex (MS) 1/8"- 1976

Cutty Sark (Revell 1:96) - 1956

Link to comment
Share on other sites

Happy Birthday for this weekend Bob. May you receive an appropriate number of ship modelling related goodies! Oh, and have an adult beverage or two of your choice to celebrate. I'll be raising a glass to you from Downunda.

Link to comment
Share on other sites

Fabulous work Bob B)  B) I do really like the contrast between the box and the black channels :wub: I shall wish you many Happy returns for both you and your model for this weekend just in case I don't get chance to pop in :) If I look half as good as you do mate,when I get to 75,I will be a happy man,I never would of guessed ;)

 

Kind Regards

 

Nigel

Currently working on Royal Caroline

Link to comment
Share on other sites

Link to comment
Share on other sites

Hello Bob,

 

Your work is truly inspiring.  Happy Anniversary and Happy Birthday.  This hobby sure has a lot of folks in the same demographic.  A few weeks from 70 myself.  Great work.

Jack

 

"I Love the smell of sawdust in the morning" apologies to John Melius

 

Current Build:      Bomb Vessel Granado, 1742 - Cross Section Scratch Build 

                             

 

Previous Builds:  Oseberg Billing Boats 9th Century Viking Ship Modified

                            Bluenose ll, AL, Lightly Bashed

                            Louisa Morrison Half Hull, Scratch Build

 

Photography Website:     http://www.27birds.com

Link to comment
Share on other sites

Link to comment
Share on other sites

Link to comment
Share on other sites

Well, from the different comments I get a slight hint that somebody had birthday  ;) My best wishes, and many years of happy modeling! You already heard it before, but your models and build logs are a real inspiration! 

 

Thomas

Current Built:   Model Shipways  Syren  (US Brig 1803)

 

Last Built:        Anfora (kit bashed)  Ictineo II  (1st steam powered submarine 1864)

 

Link to comment
Share on other sites

Thanks so much Jack. For me, and I hope for you, aging has meant more time available to pursue modeling.

 

Bob

 

Yes I began modeling about 15 years ago but never got into a groove because of my job which required a lot of travel.  I gave up until I retired and now it is fun and gets better as my skills improve.  Your work is an inspiration, thanks.

Jack

 

"I Love the smell of sawdust in the morning" apologies to John Melius

 

Current Build:      Bomb Vessel Granado, 1742 - Cross Section Scratch Build 

                             

 

Previous Builds:  Oseberg Billing Boats 9th Century Viking Ship Modified

                            Bluenose ll, AL, Lightly Bashed

                            Louisa Morrison Half Hull, Scratch Build

 

Photography Website:     http://www.27birds.com

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...